From: Manuel Lorenzo Sentis (Manuel.Lorenzo.Sentis@cern.ch)
Date: Tue Jul 05 2005 - 19:06:07 CEST
Dear Josselin,
To activate the low-energy neutron transport you have to use the card LOW-NEUT. With WHAT(4)=1,2,3 you obtain different outputs (cross sections, kerma factors etc.). You can find it in page 133 (FLUKA option LOW-NEUT) of the extended FLUKA manual in http://www.fluka.org/PhysicsModels.html.
The card LOW-MAT sets a correspondence between FLUKA materials and low energy neutron cross-sections. Depending on the physical state (temperature etc.) of the elements you use in your material definition, you can choose a suitable data base for your problem (for the available options see table 11.3 in page 336 of the extended manual).
Best regards,
Manuel Lorenzo Sentis
-----Original Message-----
From: owner-fluka-discuss@fisica.unimi.it on behalf of Josselin Morand
Sent: Tue 7/5/2005 4:17 PM
To: fluka_forum
Subject: How can I activate the gamma photons
Dear Fluka users
I'd like to activate the 22 gamma results mentionned
into the manual, with the option LOW-NEUT (22 gamma
from the ENEA set) and to have this data set in my
output file.
I searched into the manual, but I couldn't find
anything.
How can I activate it?
Thank you for your help.
Best regards,
Josselin Morand
___________________________________________________________________________
Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger
Téléchargez cette version sur http://fr.messenger.yahoo.com
This archive was generated by hypermail 2.1.6 : Tue Jul 05 2005 - 22:19:21 CEST