From: Wang RuiGuang (wangrg@mail.ihep.ac.cn)
Date: Wed Sep 13 2006 - 10:44:31 CEST
Dear Fluka users and authors,
Thanks Dr. Giuseppe Battistoni for test for me.
According to his/her advice, I comment the three LOW-MAT lines of NITROGEN,
ARGON and CALCIUM.
The running is never stop. I don't know why. Could any person please test and
check it for me?
Thanks and best regards,
R.G. Wang
---------- Forwarded Message -----------
From: Giuseppe Battistoni <Giuseppe.Battistoni@mi.infn.it>
To: Wang Rui-Guang <wangrg@mail.ihep.ac.cn>
Cc: support <support@fluka.org>, physics <physics@fluka.org>
Sent: Mon, 11 Sep 2006 08:46:34 +0200 (CEST)
Subject: Re: Problems in Fluka first running
Dear Ruiguang Wang,
The mistake is in the use of LOW-MAT cards for NITROGEN, ARGON and CALCIUM
(by the way you should write CALCIUM and not CALSIUM)
You do not need to put the LOW-MAT card for these elements (and for many
others: please read carefully the manual for the LOW-MAT use): just take
them away, or comment them. Everything is working as far as the rest is
concerned (I tested it).
Next time please send your requests to fluka-discuss@fluka.org
Good luck
Giuseppe Battistoni for the FLUKA team
On Mon, 11 Sep 2006, Wang Rui-Guang wrote:
> Date: Mon, 11 Sep 2006 10:26:11 +0800
> From: Wang Rui-Guang <wangrg@mail.ihep.ac.cn>
> To: support <support@fluka.org>, physics <physics@fluka.org>
> Cc: wangrg <wangrg@mail.ihep.ac.cn>
> Subject: Problems in Fluka first running
>
> Dear Fluka users and authors,
>
> I am a new Fluka user. About one month ago I installed the current version of
> Fluka in Linux.
> I can normally run fluka with example input file. The simulation with Fluka is
> neutron trasportation and production of underground muons in our detector.
> Based on example.inp and a similar input file of neutron detection provided by
> a enthusiastic friend, I wrote a test input file (named test1.inp). However,
> it does,t work.
>
> The information is as bellow.
>
> When run fluka, we can see " No rantest1002 generated!, No test1001.err
> generated! ......" on the terminal lines of the first cycle, and see " No
> rantest1003 generated!, ......" on the terminal lines of the second cycle,
> the same for other cycles.
>
> The test1.inp file is
> "
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> TITLE
> Muon-induced neutrons in underground rock
> DEFAULTS NEW-DEFA
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> BEAM 100.E+00 MUON-
> BEAMPOS 0.0 0.0 -1000.0
> *
> GEOBEGIN COMBINAT
> Detector in Daya Bay exp.
> RPP 1 -10000.0 +10000.0 -10000.0 +10000.0 -10000.0 +10000.0
> RPP 2 -1500.0 +1500.0 -1500.0 +1500.0 -1000.0 0.0
> RPP 3 -1000.0 +1000.0 -1000.0 +1000.0 0.0 +1500.0
> RPP 4 -500.0 +500.0 -500.0 +500.0 +1500.0 +2400.0
> RCC 5 0.0 0.0 +1700.0 0.0 0.0 +500.0
> 250.0
> RCC 6 0.0 0.0 +1740.0 0.0 0.0 +420.0
> 210.0
> RCC 7 0.0 0.0 +1780.0 0.0 0.0 +340.0
> 100.0
> END
> * black hole
> 1 5 1 -2
> * rock over the exp. hall
> 2 5 2 -3
> * air in the exp. hall
> 3 5 3 -4
> * water of the buffer
> 4 5 4 -5
> * oil
> 5 5 5 -6
> * liquid scintillator
> 6 5 6 -7
> * LS+Gd
> 7 5 7 -8
> END
> GEOEND
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> MATERIAL 1.0 1.0079 0.0000899 3.0 HYDROGEN
> LOW-MAT 3.0 1.0 -3.0 293.0 HYDROGEN
> MATERIAL 6.0 12.01 2.25 6.0 CARBON
> LOW-MAT 6.0 6.0 -2.0 293.0 CARBON
> MATERIAL 7.0 14.0067 0.00117 7.0 NITROGEN
> LOW-MAT 7.0 8.0 -2.0 293.0 NITROGEN
> MATERIAL 8.0 15.9994 0.00133 8.0 OXYGEN
> LOW-MAT 8.0 8.0 +16.0 293.0 OXYGEN
> MATERIAL 11.0 22.989770 0.971 19.0 SODIUM
> LOW-MAT 19.0 11.0 -2.0 293.0 SODIUM
> MATERIAL 12.0 24.3050 1.740 9.0 MAGNESIU
> LOW-MAT 9.0 12.0 -2.0 293.0 MAGNESIU
> MATERIAL 13.0 26.981538 2.699 10.0 ALUMINUM
> LOW-MAT 10.0 13.0 -2.0 293.0 ALUMINUM
> MATERIAL 14.0 28.0855 2.329 14.0 SILICON
> LOW-MAT 14.0 14.0 -2.0 293.0 SILICON
> MATERIAL 18.0 39.948 0.00166 20.0 ARGON
> LOW-MAT 20.0 8.0 -2.0 293.0 ARGON
> MATERIAL 20.0 40.078 1.550 21.0 CALSIUM
> LOW-MAT 21.0 20.0 -2.0 293.0 CALSIUM
> MATERIAL 26.0 55.845 7.874 11.0 IRON
> LOW-MAT 11.0 26.0 -2.0 293.0 IRON
> MATERIAL 28.0 58.6934 8.902 25.0 NICKEL
> LOW-MAT 19.0 11.0 -2.0 293.0 SODIUM
> *
> MATERIAL 15.0 30.97376 1.82 26.0 PHOSPHO
> LOW-MAT 26.0 15.0 -2.0 293.0 PHOSPHO
> MATERIAL 16.0 32.06 2.07 27.0 SULFUR
> LOW-MAT 27.0 16.0 -2.0 293.0 SULFUR
> MATERIAL 19.0 39.0983 0.862 28.0 POTASSIU
> LOW-MAT 28.0 19.0 -2.0 293.0 POTASSIU
> MATERIAL 24.0 51.996 7.19 29.0 CHROMIUM
> LOW-MAT 29.0 24.0 -2.0 293.0 CHROMIUM
> MATERIAL 25.0 54.9380 7.43 30.0 MANGANES
> LOW-MAT 30.0 25.0 55.0 293.0 MANGANES
> MATERIAL 64.0 157.25 7.895 31.0 GADOLINI
> LOW-MAT 31.0 64.0 -2.0 293.0 GADOLINI
> * No Xsec of Gd for low energy netron
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> * granite ROCK
> MATERIAL 2.70 32.0 GRANITE
> COMPOUND -0.4850 8.0 -0.3430 14.0 -0.0800 10.0 GRANITE
> COMPOUND -0.02 11.0 -0.001 9.0 -0.0020 21.0 GRANITE
> COMPOUND -0.0240 19.0 -0.0450 28.0 GRANITE
> * air
> MATERIAL 0.001205 33.0 AIR
> COMPOUND -0.7550 7.0 -0.2321 8.0 -0.0128 20.0 AIR
> COMPOUND -0.0001 6.0 AIR
> * water of the buffer
> MATERIAL 1.00 34.0 WATER
> COMPOUND -0.1119 3.0 -0.8881 8.0 WATER
> * stainless steel
> MATERIAL 8.1 35.0 STEEL
> COMPOUND -0.70845 11.0 -0.0008 6.0 -0.02 30.0 STEEL
> COMPOUND -0.00045 26.0 -0.00030 27.0 -0.01 14.0 STEEL
> COMPOUND -0.18 29.0 -0.08 25.0 STEEL
> * mineral oil
> MATERIAL 0.838 36.0 OIL
> COMPOUND -0.8514 6.0 -0.1486 3.0 OIL
> * acrylic
> MATERIAL 1.18 37.0 ACRYLIC
> COMPOUND -0.59984 6.0 -0.08055 3.0 -0.31961 8.0 ACRYLIC
> * liquid scintillator
> MATERIAL 0.855 38.0 LISCIN
> COMPOUND -0.8544 6.0 -0.1289 3.0 -0.0003 7.0 LISCIN
> COMPOUND -0.0164 8.0 LISCIN
> * liquid scintillator; 0.1% Gd loaded
> MATERIAL 1.032 39.0 LISCINGD
> COMPOUND -0.8535 6.0 -0.1288 3.0 -0.0003 7.0 LISCINGD
> *COMPOUND -0.0174 8.0 LISCINGD
> COMPOUND -0.0164 8.0 -0.0010 31.0 LISCINGD
> *
> * External black hole
> ASSIGNMAT 1.0 1.0
> * granite rock over the exp. hall
> ASSIGNMAT 32.0 2.0
> * air in the exp. hall
> ASSIGNMAT 33.0 3.0
> * water of the buffer
> ASSIGNMAT 34.0 4.0
> * mineral oil
> ASSIGNMAT 36.0 5.0
> * liquid scintillator
> ASSIGNMAT 38.0 6.0
> * LS+Gd
> ASSIGNMAT 39.0 7.0
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> STEPSIZE 1000.0 1.0 7.0
> DELTARAY 1e-5 39.0
> *EMF EMF-OFF
> EMF
> EMFCUT 0.01 0.01 0.0 1.0 7.0 1.0
> *FLUKAFIX 0.001 39.0
> * LANDAU 1.0 1.0 26.0
> LOW-NEUT
> MUPHOTON 1.0 39.0
> PAIRBREM 3.0 0.0 0.0001 39.0 KELNER
> PHOTONUC 1.0 39.0
> *OUTLEVEL 1.0 0.0
> THRESHOL 0.000001
> *PART-THR -0.001 1.0 64.0 0.0 1.0
> *DISCARD 1. 2. 3. 4. 7. 8.
> *DISCARD 9. 12. 13. 14. 15. 16.
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> USRTRACK 1.0 8.0 47.0 7.0 .00E8 40. centdet
> USRTRACK 2. 0.0 &
> USRTRACK 1.0 212.0 47.0 7.0 1.00E8 24. Muons
> USRTRACK 12. 0.0 &
> *...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> USRBIN 10.0 8.0 1000.0 1000.0 4000.0 BIN20
> USRBIN -1000.0 -1000.0 0.0 1.0 1.0 20.0 &
> USRBIN 0.0 8.0 1000.0 1000.0 4000.0 BIN20
> USRBIN -1000.0 -1000.0 0.0 1.0 1.0 20.0 &
> RANDOMIZE 1.0
>
*...+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
> *23456789 *23456789 *23456789 *23456789 *23456789 *23456789 *23456789 *23456789
> START 1000000.0 99999999. 0.0 0.0
> STOP
> "
>
> The end statment of test1001.out is
> "***** Neutron Xsec: ****
> **** Group limits, average energies, velocities and momenta start at
location 1124211, end at location 1124834 (I*4 addr.) *****
> *** Recoil proton production activated for Xsec mat. # 1 ***
> **** Low energy neutron xsec not found for some media 9 12 ****
> NITROGEN
> ARGON
> CALSIUM
> "
> The end statment of test1002.log is "STOP NO RANDOM FILE"
>
> The test1002.err is
> "Abort called from FLRM64 reason NO RANDOM FILE Run stopped!
> STOP NO RANDOM FILE"
>
> The end statment of test1002.out is
> "
> **** No Random file available !!!!!! ****
> Abort called from FLRM64 reason NO RANDOM FILE Run stopped!
> STOP NO RANDOM FILE
> "
>
> I checked again and again, but have not found any bugs until now. This problem
> has stop me three weeks.
> So I sincerely hope warmhearted persons to give me a hand.
>
> Thanks in advance!
> With best regards,
>
> Ruiguang Wang
>
>
>
------- End of Forwarded Message -------
-- Open WebMail Project (http://openwebmail.org)
This archive was generated by hypermail 2.1.6 : Wed Sep 13 2006 - 21:27:04 CEST