From: Sebastien WURTH (wurth@ipno.in2p3.fr)
Date: Wed Dec 20 2006 - 14:56:34 CET
Hello Preek,
I tried also the same thing before I saw your second mail.
With SDUM of BEAMPOS = NEGATIVE and wbeam (in source.f) = cos (z_ang),
your beam goes in positive z direction and therefore since there is
nothing in this area in your geometry as vacuum, there are "no"
interactions.
If you change wbeam to -wbeam in source.f (what we did both of us
apparently), the beam goes in negative z direction and interactions with
your geometry occur.
See test.rar attached, a plot from a slice using a USRBIN estimator I
put in to check if everything goes OK.
PS : Any problem with your second archive ? I cannot open it.
Regards.
Sebastien.
g4736524@student.mahidol.ac.th a ecrit :
>Hi Konstantin,
> I meant the 6_nm001.out, there were not a
>list interaction (in summary of fluka run)
>occured, but it worked when i triedagain (after
>send mail) with no "nagative" inBEAMPOS card and
>set "wbeam" to
>"- wbeam" (insourcemod.f that i sent). Now
>there were a list interaction occured in
>6_nm001.outbut no output
>(6_nm001_fort.61by Mgdraw.f). Also, I tested it
>by mono-energetic& direction (no request for
>sourcemod.f) which it works
>(6_nm001_fort.61,occured.)
>
>Hope it help you to see how is my problems.
>Ps, I attached 6_nm001.out & mgdraw.f already.
>
>regards,
>Preek...
>
>
>Quoting Konstantin Batkov <kbat@dec1.sinp.msu.ru>:
>
>
>>Hi Preek,
>>
>>What do you mean "*.out" file? The one
>>which has name "6_nm001_fort.62" ?
>>Numbers in this file are correct because
>>XBEAM, YBEAM and ZBEAM
>>correspond to the coordinates of the spot
>>center as indicated in your
>>input: 0.0 0.0 150.0
>>
>>Konstantin
>>
>>
>>
>
>
>-------------------------------------------------
>This mail sent through MU-Webmail: webmail.mahidol.ac.th
>
>
This archive was generated by hypermail 2.1.6 : Wed Dec 20 2006 - 15:42:24 CET