Hi Andrew
You may find this post useful regarding the awk messages
http://www.fluka.org/web_archive/earchive/new-fluka-discuss/6448.html
However, finally I see that you get an flukahp created ;-)
At the same time, in your input there is a blank in front of the GEOBEGIN card and body/region definitions, the second line of the GEOBEGIN card is incorrect etc... I have attached a corrected input that works, at least technically. Please try
Cheers
Stefan
From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> On Behalf Of Andrew Hastings
Sent: 25 July 2018 17:46
To: fluka discussion <fluka-discuss_at_fluka.org>
Subject: [fluka-discuss]: Gfortran install errors (flukahp and flutil)
Fluka Experts,
Since Flupix isn't available at the moment, I've decided to try and give Fluka for 64-bit Linux with gfortran a shot. I'm running Ubuntu 18.04 in Virtual Box with gfortran 7.3.0. I've installed python3, tk, tkinter, and several other prerequisite programs based on the installation procedures and other guides.
I've run into a reoccurring issue with each of my installation attempts so far. Certain files aren't found during the 'make' command, and then the practice problem involving 50 GeV proton beam onto Be target won't run properly. It never gets past the ===Running Cycle 1=== message.
I've attached the terminal text in HTML format in the hopes that the installation process results will help you discover why I'm having this issue. Additionally, I attached my input file for the practice problem. I'm not 100% certain that my syntax is correct.
Thank you in advance,
[1465572792562_image003.png]
Andrew D. Hastings
Medical Physics and Health Physics Graduate Student (MS)
College of Engineering SI Coordinator
Louisiana State University
(225)333-8435|ahasti4_at_lsu.edu<mailto:ahasti4_at_lsu.edu>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Jul 26 2018 - 13:20:32 CEST