[fluka-discuss]: RE: Proton fluence and energy deposition in user defined units

From: Tshepo Mahafa <Tshepo.Mahafa_at_necsa.co.za>
Date: Fri, 27 Jul 2018 07:31:49 +0000

Dear Stefan,

Thanks very much for the reply.

By “100 is the energy bin” – I refer to the energy intervals , Ebins = 100, that is WHAT9 under USRBDX.
I multiplied by it to get rid of per GeV.
Or was I wrong to multiply by it? If that’s the case, how do I then get rid of the per GeV?

Warm Wishes
Tshepo

From: Stefan Roesler [mailto:Stefan.Roesler_at_cern.ch]
Sent: 25 July 2018 04:57 PM
To: Tshepo Mahafa; 'fluka-discuss_at_fluka.org'
Subject: RE: Proton fluence and energy deposition in user defined units

Dear Tshepo

Looks ok to me, apart from your comment “100 is the energy bin” that I don’t understand (which unit?)

Cheers
Stefan

From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> On Behalf Of Tshepo Mahafa
Sent: 25 July 2018 11:15
To: 'fluka-discuss_at_fluka.org' <fluka-discuss_at_fluka.org>
Subject: [fluka-discuss]: Proton fluence and energy deposition in user defined units

Dear Fluka Experts

I have a zircaloy-4 sheet of dimensions, 1 cm x 0.5 cm x 1 cm bombarded with a proton beam of 2 MeV at a current of 1 mA.
I want to estimate the proton fluence (in protons/cm2) as well as the energy deposition (in J/cm3) in the target rather than
In the units given by FLUKA (i.e. particles/GeV/cm2/sr/primary for fluence and GeV/cm3/primary for energy deposition)
I have used USRBDX for fluence and USRBIN for energy deposition.

I have attached the input file as well as the screenshots of how I move from the FLUKA units to the one I want.
The fluence_USRBDX(A) and Zircaloy_DepthView has fluka units while pfluence_USRBDX(B) and Zircaloy_DepthVIew(B)
have the units I want.

Could someone please check for me and advise if what I did makes sense and is correct.

I will greatly appreciate a response,

Kind Regards,

Tshepo Mahafa





Tshepo Mahafa

Tel:

Fax:

Cell:

Email: Tshepo.Mahafa_at_necsa.co.za

Website: www.necsa.co.za<http://www.necsa.co.za>


[Facebook]<https://web.facebook.com/necsasoc/>

[Twitter]<https://twitter.com/necsa_Ltd>

[LinkedIn]<https://www.linkedin.com/company/necsa/>




________________________________

This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version from NECSA.



________________________________

Scanned by MailMarshal - Trustwave's comprehensive email content security solution. Download a free evaluation of MailMarshal at www.trustwave.com<http://www.trustwave.com>
________________________________

#####################################################################################
Scanned by MailMarshal - Trustwave's comprehensive email content security solution.
Download a free evaluation of MailMarshal at www.trustwave.com
#####################################################################################



__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Received on Fri Jul 27 2018 - 11:07:26 CEST