[fluka-discuss]: RE: extended source

From: Mihaela Parvu <mihaela.parvu_at_cern.ch>
Date: Fri, 3 Aug 2018 13:59:46 +0000

So if I want to use a a user defined source I should change the beam definition inside the source.f or how?


________________________________
From: Vasilis Vlachoudis
Sent: 03 August 2018 16:55
To: Mihaela Parvu; fluka-discuss_at_fluka.org
Subject: RE: extended source

It doesn't work since you have added also a "SOURCE" card
The SOURCE card tells the code to call the user routine source.f
and not the predefined one with the cards.
Comment the SOURCE and it will work.

Vasilis
________________________________
From: Mihaela Parvu
Sent: Friday, August 03, 2018 15:35
To: Vasilis Vlachoudis; fluka-discuss_at_fluka.org
Subject: RE: extended source

Here is the input.
Thank you for your help!

________________________________
From: Vasilis Vlachoudis
Sent: 03 August 2018 12:12
To: Mihaela Parvu; fluka-discuss_at_fluka.org
Subject: RE: extended source

Please always use reply-all to keep the discussion on the list.
Can you send your input file to check what is wrong.

V.

________________________________
From: Mihaela Parvu
Sent: Friday, August 03, 2018 11:04
To: Vasilis Vlachoudis
Subject: RE: extended source

Hello Vasilis,

Thank you for your response. I tried working wih this card, but it is not working.
________________________________
From: Vasilis Vlachoudis
Sent: 03 August 2018 10:01
To: Mihaela Parvu; fluka-discuss_at_fluka.org
Subject: RE: extended source

Hi Michaela,

you can use the card BEAMPOS with sdum: CART-VOL

Vasilis
________________________________
From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of Mihaela Parvu [mihaela.parvu_at_cern.ch]
Sent: Friday, August 03, 2018 07:25
To: fluka-discuss_at_fluka.org
Subject: [fluka-discuss]: extended source

Hello,

Can you please help me with the definition of an extended beam source just like the one in the attached photo?


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Aug 03 2018 - 17:05:55 CEST

This archive was generated by hypermail 2.3.0 : Fri Aug 03 2018 - 17:05:56 CEST