Hi David,
the precompiled version worked perfectly.
saurabh
On Thu, Aug 2, 2018 at 12:23 AM, Horváth Dávid <David.Horvath_at_eli-beams.eu>
wrote:
> Dear Jyoti,
>
>
> please try to install the precompiled version of geoviewer. Download the
> flair-geoviewer-2.3-0.x86_64.rpm package from the website (assuming 64bit
> OS), and run the following command:
>
>
> rpm -ivh flair-geoviewer-2.3-0.x86_64.rpm
>
>
> Kind regards,
>
> David Horvath
> ------------------------------
> *From:* owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it>
> on behalf of Saurabh Mukherjee <sxm3816_at_gmail.com>
> *Sent:* 01 August 2018 19:57:46
> *To:* Andrea Fontana
> *Cc:* Jyoti; fluka-discuss
> *Subject:* Re: [fluka-discuss]: Error while installing FLUKA in Fedora 28
>
> Hi all
> I had the same problem. The errors are same as -
> http://www.fluka.org/FLUKA/web_archive/earchive/new-
> fluka-discuss/12084.html
>
> My solution was also similar as the link above- i installed Fedora26 (in
> virtual Box) and running FLAIR in it.
> I paste below the terminal output to the make command (for flair
> geoviewer).
>
> [mukherjee_at_localhost flair-geoviewer-2.3]$ make
> make -C optimizer
> make[1]: Entering directory '/home/mukherjee/Downloads/
> flair-geoviewer-2.3-0(1)/flair-geoviewer-2.3/optimizer'
> c++ -c roi.cc -m64 -DUNIX -O4 -funroll-loops -g -DNDEBUG -D_DEBUG=0
> -DTHREAD -Wall -Wcast-align -Wcast-qual -Wextra -Wformat -Wpointer-arith
> -Wredundant-decls -Wshadow -Wno-write-strings -fwrapv -fstack-protector
> -fpic -I../utils -I../math -I../graph -I../geometry -I../data
> -fstrict-aliasing
> In file included from ../data/eventbin.h:43,
> from roi.h:19,
> from roi.cc:11:
> ../data/usrbin.h: In member function ‘double Usrbin::get(double, double,
> double, bool*) const’:
> ../data/usrbin.h:221:9: error: ‘pow10’ was not declared in this scope
> v = pow10(v);
> ^~~~~
> ../data/usrbin.h:221:9: note: suggested alternative: ‘powl’
> v = pow10(v);
> ^~~~~
> powl
> ../data/usrbin.h: In member function ‘double Usrbin::get(int, bool*)
> const’:
> ../data/usrbin.h:228:9: error: ‘pow10’ was not declared in this scope
> v = pow10(v);
> ^~~~~
> ../data/usrbin.h:228:9: note: suggested alternative: ‘powl’
> v = pow10(v);
> ^~~~~
> powl
> make[1]: *** [../rules.mk:209: roi.o] Error 1
> make[1]: Leaving directory '/home/mukherjee/Downloads/
> flair-geoviewer-2.3-0(1)/flair-geoviewer-2.3/optimizer'
> make: *** [makefile:286: optimizer/liboptimizer.a] Error 2
> [mukherjee_at_localhost flair-geoviewer-2.3]$ make install
> mkdir -p /usr/local/flair
> mkdir -p /usr/local/flair/fonts
> install -m 644 geoviewer.so /usr/local/flair
> install: cannot stat 'geoviewer.so': No such file or directory
> make: *** [makefile:344: install] Error 1
> [mukherjee_at_localhost flair-geoviewer-2.3]$
>
> sincerely
> saurabh
>
> On Wed, Aug 1, 2018 at 9:37 PM, Andrea Fontana <andrea.fontana_at_pv.infn.it>
> wrote:
>
>> Dear Jyoti,
>> did you try to install Flair and the Geoviewer from the .tar files?
>> If you follow the instructions in the README files (and if you have
>> the pre-requisite software installed) you will compile Flair and the
>> Geoviewer from the source files. With the rpm you are installing a
>> pre-built binary.
>>
>> Please try: in Fedora 28 it should work.
>>
>> Kind regards,
>> Andrea
>>
>>
>> Il 31/07/2018 07:48, Jyoti ha scritto:
>>
>>> Dear FLUKA Experts
>>>
>>> While installing FLUKA in Fedora 28, I am facing problem while
>>> installing the geoviewer file.
>>> I gave the command:
>>> rpmbuild --rebuild flair-geoviewer-2.3-0.src.rpm
>>> The following error is displayed:
>>> RPM build errors:
>>> user bnv does not exist - using root
>>> group dr does not exist - using root
>>> user bnv does not exist - using root
>>> group dr does not exist - using root
>>> Bad exit status from /var/tmp/rpm-tmp.cC2oQI (%build)
>>>
>>> Kindly tell me how to resolve this issue.
>>>
>>> With Regards
>>> Jyoti Garg
>>>
>>
>> --
>> ========================================================================
>> Dr. Andrea Fontana tel: +39 0382 987991
>> Istituto Nazionale fax: +39 0382 423241
>> di Fisica Nucleare
>> Sezione di Pavia e-mail: andrea.fontana_at_pv.infn.it
>> Via Bassi 6 <https://maps.google.com/?q=Via+Bassi+6&entry=gmail&source=g>
>> web : www.pv.infn.it/~fontana
>> 27100 PAVIA, Italy
>> ========================================================================
>>
>> ____________________________________________________________
>> ______________
>> You can manage unsubscription from this mailing list at
>> https://www.fluka.org/fluka.php?id=acc_info
>>
>>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Sun Aug 05 2018 - 18:10:01 CEST