Re: *** SPAM *** Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?

From: <mrakbari2015_at_ast.ui.ac.ir>
Date: Sun, 02 Sep 2018 07:21:17 +0430

  Quoting Horváth Dávid <David.Horvath_at_eli-beams.eu>:

> Dear Mahmoudreza,
>
> 1.) It's not needed to add the "source .bashrc" command to the
> .bashrc file. You just need to execute this command in the terminal
> after editing the .bashrc file.
>
> 2.) According to your screen shot the FLUPRO variable is now
> correctly set up, but some permissions needs to be fixed.
>
> As root run the following commands:
> cd /usr/local/fluka
> chmod -R a+rX *
>
> This should fix your permission problem, and you should be able to
> run FLUKA as non root.
>
> Kind regards,
> Dávid Horváth
>
> Junior Researcher
> Radiation Protection
> ELI Beamlines
>
> E: david.horvath_at_eli-beams.eu
> T: +420 266 051 283
> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>
> ________________________________________
> From: mrakbari2015_at_ast.ui.ac.ir <mrakbari2015_at_ast.ui.ac.ir>
> Sent: 29 August 2018 03:31:08
> To: Fasso, Alberto
> Cc: Horváth Dávid; fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: installing fluka-2011.2x-3.x86_64 on fedora 24?
>
> Quoting "Fasso, Alberto"
> <fasso_at_slac.stanford.edu<mailto:fasso_at_slac.stanford.edu>>:
>
> ____________________________________
>
> To apply the changes in the .bashrc file, you should log out and log
> in again.
>
> It is not necessary to log out. Just type:
> source .bashrc
> Alberto
>
> Dear Dr. Fasso
> Thanks for taking time for solving my problem. I edited .bashrc file
> according to recommendation. Unfortunately my problem has not been
> solved. Attached file is my .bashrc file image and my terminal
> commands.
> Any help would be apprtiated
> Kind Regards,
> Mahmoudreza
>
> __________________________________________________________________________You can manage unsubscription from this mailing list at
> https://www.fluka.org/fluka.php?id=acc_info

Dear David,
I installed fluka but i am concered about these messages?
/usr/local/fluka/flutil/fff -N detsuw.f
detsuw.f:175:5:

  9999 CONTINUE
     1
Warning: Label 9999 at (1) defined but not used
/usr/local/fluka/flutil/fff -N usbrea.f
usbrea.f:311:72:

      &                ERR = 6750 )
                                                                        1
Warning: The STATUS specified in OPEN statement at (1) is ‘NEW’ and no
FILE specifier is present
usbrea.f:536:5:

  8970 FORMAT (/,1X,'*****',2X,A80,2X,'*****',/,/,10X,A32,/,/,
     1
Warning: Label 8970 at (1) defined but not used
usbrea.f:511:5:

  8650 FORMAT (/,3X,'Binning n:',I5,', "',A10,'",  Event #:',I6,
     1
Warning: Label 8650 at (1) defined but not used
usbrea.f:457:5:

  8496 FORMAT (6X,'Single precision storage requested for this binning')
     1
Warning: Label 8496 at (1) defined but not used
usbrea.f:455:5:

  8493 FORMAT (6X,'Coordinate transformation #',I4,
     1
Warning: Label 8493 at (1) defined but not used
usbrea.f:448:5:

  8460 FORMAT (6X,'normalized (per unit volume) data will be printed',
     1
Warning: Label 8460 at (1) defined but not used
usbrea.f:447:5:

  8450 FORMAT (6X,'unnormalized data will be printed event by event')
     1
Warning: Label 8450 at (1) defined but not used
/usr/local/fluka/flutil/fff -N usbsuw.f
/usr/local/fluka/flutil/fff -N usrsuw.f
/usr/local/fluka/flutil/fff -N usrsuwev.f
usrsuwev.f:435:72:

          FILE1 = FILE
                                                                        1
Warning: CHARACTER expression will be truncated in assignment
(210/232) at (1) [-Wcharacter-truncation]
/usr/local/fluka/flutil/fff -N ustsuw.f
ustsuw.f:951:5:

 10004 FORMAT ((1X,A,1X,1P,G14.7,1X,G14.7))
     1
Warning: Label 10004 at (1) defined but not used
/usr/local/fluka/flutil/fff -N usxrea.f
/usr/local/fluka/flutil/fff -N usxsuw.f
usxsuw.f:1042:5:

  9503 FORMAT (2(1X,1P,E10.3),/,(20(1X,1P,E10.3)))
     1
Warning: Label 9503 at (1) defined but not used
usxsuw.f:1040:5:

  9502 FORMAT ((20(1X,1P,E10.3)))
     1
Warning: Label 9502 at (1) defined but not used
/usr/local/fluka/flutil/fff -N usysuw.f
usysuw.f:566:72:

             FILE1 = FILE
                                                                        1
Warning: CHARACTER expression will be truncated in assignment
(220/232) at (1) [-Wcharacter-truncation]
usysuw.f:663:72:

             FILE1 = FILE
                                                                        1
Warning: CHARACTER expression will be truncated in assignment
(220/232) at (1) [-Wcharacter-truncation]
/usr/local/fluka/flutil/fff -N gplevbin.f
gplevbin.f:376:72:

                   WRITE (93,*) Y+DYBIN,XM,FLUMAT(IDOS),FLEMAT(IDOS)*100.0
                                                                        1
Warning: Line truncated at (1) [-Wline-truncation]
gplevbin.f:378:72:

                   WRITE (93,*) XM,Y+DYBIN,FLUMAT(IDOS),FLEMAT(IDOS)*100.0
                                                                        1
Warning: Line truncated at (1) [-Wline-truncation]
gplevbin.f:753:5:

  9999 CONTINUE
     1
Warning: Label 9999 at (1) defined but not used

I mean, i can not understand these warnings. do they have any effect
on my program running?
I solve the prevous problem but again aother problem has occured!!
[mrakbari2012_at_mahmoudreza fluka]$ cd /home
[mrakbari2012_at_mahmoudreza home]$ /usr/local/fluka/flutil/ldpmqmd
$FLUPRO = /usr/local/fluka
 now linking
/usr/local/fluka
gfortran
mkdir: cannot create directory ‘tmpo’: Permission denied
/usr/local/fluka/flutil/lfluka: line 135: cd: tmpo: No such file or directory
dpmjex.o: Permission denied
eveqmd.o: Permission denied
ls: cannot access 'tmpo/*.o': No such file or directory

ar x /usr/local/fluka/libflukahp.a fluka.o
fluka.o: Permission denied
rm: cannot remove 'flukadpm3.map': No such file or directory
gfortran -msse2 -mfpmath=sse -fPIC -O3 -g -mtune=generic
-fexpensive-optimizations -funroll-loops -fstrength-reduce -Wall
-Wuninitialized -Wno-tabs -Wline-truncation -Wno-unused-function
-Wno-unused-parameter -Wno-unused-dummy-argument -Wno-unused-variable
-Wno-conversion -Wunused-label -Waggregate-return -Wcast-align
-Wsystem-headers -ftrapping-math -frange-check -fbackslash -fdump-core
-fbacktrace -ffpe-trap=invalid,zero,overflow -finit-local-zero
-ffixed-form -frecord-marker=4 -funderscoring -fno-automatic
-fd-lines-as-comments -fbounds-check -I/usr/local/fluka/flukapro -v -o
flukadpm3 -Xlinker -Map -Xlinker flukadpm3.map fluka.o
-L/usr/local/fluka -L/usr/local/fluka/interface
-L/usr/local/fluka/latestRQMD -ldpmjet3 -lrqmd -lflukahp
Driving: gfortran -msse2 -mfpmath=sse -fPIC -O3 -g -mtune=generic
-fexpensive-optimizations -funroll-loops -fstrength-reduce -Wall
-Wuninitialized -Wno-tabs -Wline-truncation -Wno-unused-function
-Wno-unused-parameter -Wno-unused-dummy-argument -Wno-unused-variable
-Wno-conversion -Wunused-label -Waggregate-return -Wcast-align
-Wsystem-headers -ftrapping-math -frange-check -fbackslash -fdump-core
-fbacktrace -ffpe-trap=invalid,zero,overflow -finit-local-zero
-ffixed-form -frecord-marker=4 -funderscoring -fno-automatic
-fd-lines-as-comments -fbounds-check -I/usr/local/fluka/flukapro -v -o
flukadpm3 -Xlinker -Map -Xlinker flukadpm3.map fluka.o
-L/usr/local/fluka -L/usr/local/fluka/interface
-L/usr/local/fluka/latestRQMD -ldpmjet3 -lrqmd -lflukahp -l gfortran
-l m -shared-libgcc
gfortran: error: fluka.o: No such file or directory
Using built-in specs.
COLLECT_GCC=gfortran
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/6.3.1/lto-wrapper
Target: x86_64-redhat-linux
Configured with: ../configure --enable-bootstrap
--enable-languages=c,c++,objc,obj-c++,fortran,ada,go,lto --prefix=/usr
--mandir=/usr/share/man --infodir=/usr/share/info
--with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-shared
--enable-threads=posix --enable-checking=release --enable-multilib
--with-system-zlib --enable-__cxa_atexit
--disable-libunwind-exceptions --enable-gnu-unique-object
--enable-linker-build-id --with-linker-hash-style=gnu --enable-plugin
--enable-initfini-array --disable-libgcj --with-isl --enable-libmpx
--enable-gnu-indirect-function --with-tune=generic --with-arch_32=i686
--build=x86_64-redhat-linux
Thread model: posix
gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC)

Please let me know the exact problem?
Best


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Sun Sep 02 2018 - 06:17:02 CEST

This archive was generated by hypermail 2.3.0 : Sun Sep 02 2018 - 06:17:13 CEST