--- Dávid Horváth Junior Researcher Radiation Protection ELI Beamlines E: david.horvath_at_eli-beams.eu T: +420 266 051 283 M: Za Radnicí 835, 25241 Dolní Břeľany, Czech Republic ________________________________________ From: Abhijit Bhattacharyya <vega_at_barc.gov.in> Sent: 04 December 2018 05:10:01 To: Horváth Dávid Cc: fluka-discuss_at_fluka.org Subject: Re: [fluka-discuss]: New Fluka issue in ubuntu 18.04 Dear David, Yes, I installed fluka2011.2x-linux-gfor64bit-7.3-AA.tar.gz package. The backtrace part is peculiar to me. Best Abhijit On 03/12/2018 12:44, Horváth Dávid wrote: > Dear Abhijit, > > the error message suggests that, you tried to install a FLUKA version > not compatible with your compiler. Please check if you tried to > install the fluka2011.2x-linux-gfor64bit-7.3-AA.tar.gz package. > > Kind regards, > Dávid Horváth > > Junior Researcher > Radiation Protection > ELI Beamlines > > E: david.horvath_at_eli-beams.eu > T: +420 266 051 283 > M: Za Radnicí 835, 25241 Dolní Břeľany, Czech Republic > > > ________________________________________ > From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> > on behalf of Dr. Abhijit Bhattacharyya <vega_at_barc.gov.in> > Sent: 03 December 2018 06:07:08 > To: fluka-discuss_at_fluka.org > Subject: [fluka-discuss]: New Fluka issue in ubuntu 18.04 > > Hello! > > I installed recently new FLUKA2011.2x followed by flair and flair > geomviewer in Ubuntu > OS 18.04 LTS while I find some issues. > > First I would like to configuration in my laptop: > (a) linux kernel: 4.19.6-041906-generic (x86_64), > (b) gcc version: 7.3.0-27ubuntu1~18.04 > (c) gfortran version: 7.3.0-27ubuntu1~18.04 > (d) GNU ld version: 2.30 > > I defined FLUFOR and FLUPRO as described. > > I faced that my input was not running and then I tried to run > exfixed.inp as provided in > fluka distribution as suggested by one of my friend. > > I see "timed out" in run status in flair. So I tried to run using > "rfluka -M 1 > exfixed.inp" directly from command prompt. I see that "fluka_6423" > subdirectory is > formed which contains manyfiles. Here fort.11 points to exfixed001.out > file which was > not created. > > The peculiar part is that "fluka_6423/exfixed001.log" contains > following: > > vega_at_aditya:~/test$ cat fluka_6423/exfixed001.log > Fortran runtime error: Incorrect extent in VALUE argument to > DATE_AND_TIME intrinsic: is > -140202614629398, should be >=8 > > Error termination. Backtrace: > #0 0x7f8376ac12da in ??? > #1 0x7f8376ac1ec5 in ??? > #2 0x7f8376ac21b7 in ??? > #3 0x7f8376c50fc2 in ??? > #4 0x564af9cca0db in datimf_ > at /home/alfredo/fluprogfor/linuxmvax/datimf.f:55 > #5 0x564af9c16464 in flukam_ > at /home/alfredo/fluprogfor/mainmvax/flukam.f:1163 > #6 0x564af9c162fb in fluka > at /home/alfredo/fluprogfor/mainmvax/fluka.f:307 > #7 0x564af9c162fb in main > at /home/alfredo/fluprogfor/mainmvax/fluka.f:310 > vega_at_aditya:~/test$ > > > The "date-time" error and pointer to "/home/alfredo/..." are something > not expected. Is > there anything wrong in my installation? > > Please advise. > Thanks and Regards > Abhijit Bhattacharyya > > -- > Dr. Abhijit Bhattacharyya > OFFICE: > NUCLEAR PHYSICS DIVISION > Bhabha Atomic Research Center (BARC) > MUMBAI - 400 085. INDIA > PHONE: +92-22-2559-2066 > FAX:- +91-22-2550-5151 > > Residence: > A/13 Deepak > Anushakti Nagar > MUMBAI - 400 094. INDIA > PHONE: +91-22-25580930 > Mobile: +91-98201-49770 > > > > __________________________________________________________________________ > You can manage unsubscription from this mailing list at > https://www.fluka.org/fluka.php?id=acc_info -- Abhijit Bhattacharyya Nuclear Physics Division Bhabha Atomic Research Centre Mumbai - 400 085 INDIA __________________________________________________________________________ You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id¬c_infoReceived on Tue Dec 04 2018 - 09:36:47 CET
This archive was generated by hypermail 2.3.0 : Tue Dec 04 2018 - 09:36:49 CET