Dear David,
I am happy to say that FLUKA its working and I have been able of running an example. I wanted to thank you for your help and attention. If you don't mind, could you tell me what is the difference between adding quotation marks or not to (that way I will be a little less dumb).
Thanks a lot,
Luis
> Hi Luis,
>
> unfortunately that is not correct. You should get only "gfortran", not the path to gfortran.
>
> Try using:
> export FLUFOR="gfortran"
>
> Kind regards,
> Dávid Horváth
>
> Junior Researcher
> Radiation Protection
> ELI Beamlines
>
> E: david.horvath_at_eli-beams.eu
> T: +420 266 051 283
> M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
>
>
> ________________________________________
> From: luisgona_at_alumni.uv.es <luisgona_at_alumni.uv.es>
> Sent: 19 February 2019 16:56:10
> To: Horváth Dávid
> Cc: fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: Error Running Example
>
> Hello David,
>
> Firsty, I am sorry for not keeping fluka-discuss in CC.
>
> On the other hand, when I type echo $FLUFOR, I get "/Users/luisgonam/.././usr/local/bin/gfortran". Moreover, when I do "$FLUFOR --version", I get "GNU Fortran (Homebrew GCC 8.2.0) 8.2.0". This is what I should get, isn't it?
>
> Regards,
> Luis
>
> > Hi Luis,
> >
> > the problem seems to be with the command "export FLUFOR=gfortran"
> > Please, make sure it is set correctly with "echo $FLUFOR", and check for possible typos.
> >
> > Also, please keep the Fluka discussion list in CC.
> >
> > Kind regards,
> > Dávid Horváth
> >
> > Junior Researcher
> > Radiation Protection
> > ELI Beamlines
> >
> > E: david.horvath_at_eli-beams.eu
> > T: +420 266 051 283
> > M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
> >
> >
> > ________________________________________
> > From: luisgona_at_alumni.uv.es <luisgona_at_alumni.uv.es>
> > Sent: 19 February 2019 16:05
> > To: Horváth Dávid
> > Subject: Re: [fluka-discuss]: Error Running Example
> >
> > Dear David,
> >
> > I have done what you advised me. I removed all the FLUKA files and tried to do all the steps again. However when I type "make" now I find this error:
> >
> > No valid compiler found
> > make: *** [flukahp] Error 1
> >
> > With the aim of solving this as soon as possible, I will tell you all the steps I made.
> > 1-I remove all the FLUKA files I had
> > 2-I reinstalled gcc "brew reinstall gcc", so now I have in "/usr/local/bin" two files called "gfortran" and "gfortran-8"
> > 3-I downloaded and moved the "fluka2011.2x-mac-gfor64bit-8.2-AA.tar" package to a folder called FLUKA.
> > 4-I typed the commands "export FLUFOR=gfortran" and
> > "export FLUPRO=~/Desktop/FISICA/MASTER/TFM/FLUKA/".
> > 5-cd $FLUPRO and "tar -xvf fluka2011.2x-mac-gfor64bit-8.2-AA.tar"
> > 6-make
> > And then I get this error message
> >
> > Best regards,
> > Luis
> > PD:I also tried "export GFORFLU=gfortran" and "export GFORFLU=gfortran-8" with identical result
> >
> > > Dear Luis,
> > >
> > > the error message suggest a mismatch between the version of gfortran on your system and the one used for compiling the FLUKA package.
> > >
> > > I tested the fluka2011.2x-mac-gfor64bitAA.tar.gz package with a fresh installation of macOS and gcc (homebrew), and it was working.
> > >
> > > You could try to reinstall gcc and redownload/recompile FLUKA again.
> > > Please check that after download you get the fluka2011.2x-mac-gfor64bit-82-AA.tar in you download folder.
> > >
> > > Kind regards,
> > > Dávid Horváth
> > >
> > > Junior Researcher
> > > Radiation Protection
> > > ELI Beamlines
> > >
> > > E: david.horvath_at_eli-beams.eu
> > > T: +420 266 051 283
> > > M: Za Radnicí 835, 25241 Dolní Břežany, Czech Republic
> > >
> > >
> > > ________________________________________
> > > From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> on behalf of luisgona_at_alumni.uv.es <luisgona_at_alumni.uv.es>
> > > Sent: 17 February 2019 20:10:55
> > > To: fluka-discuss_at_fluka.org
> > > Subject: [fluka-discuss]: Error Running Example
> > >
> > > Dear fluka experts/users,
> > >
> > > I recently installed fluka for mac and now I am trying unsuccessfully to run an example. However, I keep finding the next error:
> > >
> > > Fortran runtime error: Incorrect extent in VALUE argument to DATE_AND_TIME intrinsic: is 1, should be >=8
> > >
> > > Error termination. Backtrace:
> > > #0 0x1355f71ac
> > > #1 0x1355f7e45
> > > #2 0x1355f811a
> > > #3 0x1357d9a12
> > > #4 0x104a6c2d9
> > > #5 0x10478b475
> > > #6 0x104a6e5cb
> > >
> > > Regards,
> > > Luis
> > > PD: I have read that this is related with the compiler. I have used FLUFOR=gfortran, which is the one I used to install FLUKA. Also when I type "gfortran --version" I get "GNU Fortran (GCC) 8.2.0", so I installed the following pack "fluka2011.2x-mac-gfor64bitAA.tar.gz"(In case this helps)
> > >
> > > Regards,
> > >
> > > Luis
> > >
> > >
> > > __________________________________________________________________________
> > > You can manage unsubscription from this mailing list at https://www.flukaorg/fluka.php?id=acc_info
> > >
> > >
> >
> >
>
>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Tue Feb 19 2019 - 19:12:46 CET