Hi Michel,
the electromagnetic process has an exponential cost in CPU time the lower the energy cuts you put.
Below a few MeV you don't have any photo-nuclear interactions (anyhow a tiny contribution which in fluka
it has to be enabled explicitly). Thus the only contribution from simulating electrons/photons for low
energies is only for energy deposition purposes, of course very close to your detector.
So my approach would have been far away from the sensitive region use high cuts (several MeV or
even higher). You have to experiment with sort runs and profile the cpu time.
Lower the cuts close to your detector, without going below a certain point
that the range of the em particles is much shorter than the scoring you are interested.
Vasilis
________________________________
From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of Michel Georges Najarian [michel.najarian_at_edu.uwaterloo.ca]
Sent: Wednesday, April 10, 2019 16:13
To: fluka-discuss
Subject: [fluka-discuss]: EMFCUT strategy
Hi FLUKA experts,
I'm using the two-step method to simulate cosmic rays hitting a detector in Ottawa. So far, I've been able to complete both steps but I'm now trying to include electron and photon transport, which I didn't include initially as the computational time was way too big. Thus I decided to use the EMF card with EMF-OFF SDUM to drastically reduce computational time. Reading on EMFCUT, I theorized that I'd be possible to get turn on EMF only for specific regions which wouldn't require as much computation time as having EMF on for all the regions.
As a result, my question is, what's the best way/strategy to simulate electron and photon transport, using the EMFCUT card, in order to have results with reasonable computational time? From which layer of the atmosphere should I start simulating electron and photon transport in order to have accurate enough results? Thank you very much!
Regards,
Michel Georges Najarian
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Apr 11 2019 - 09:16:46 CEST