What is USRBIN command result's units of total deposited energy density?
-----原始邮件-----
发件人:"Liang, Taiee" <taiee.liang_at_desy.de>
发送时间:2019-11-26 21:01:42 (星期二)
收件人: "李立华" <13691416247_at_ciae.ac.cn>, fluka-discuss_at_fluka.org
抄送:
主题: RE: [fluka-discuss]: to get efficient dose
Dear 李立华,
Please keep the emails on the fluka-discuss mailing list as well.
Yes, it is possible to filter the result for effective does of neutron with WHAT(2) of AUXSCORE. By default it is for all particles “ALL-PART”, so your card should instead have either the FLUKA particle code “8.0” or with the name based input “NEUTRON”. In this way, your neutron fluence from USRBDX is multiplied by the dose conversion coefficients.
Cheers!
Ted
From:李立华 [mailto:13691416247_at_ciae.ac.cn]
Sent: Tuesday, November 26, 2019 1:21 PM
To: liang, taiee
Subject: Re: RE: [fluka-discuss]: to get efficient dose
Can neutron effective dose be obtained using this solution?
best regards
-----原始邮件-----
发件人:"Liang, Taiee" <taiee.liang_at_desy.de>
发送时间:2019-11-25 22:18:37 (星期一)
收件人: "李立华" <13691416247_at_ciae.ac.cn>, fluka-discuss_at_fluka.org
抄送:
主题: RE: [fluka-discuss]: to get efficient dose
Dear 李立华,
If I understand your question, I believe you are asking how to calculate “effective” dose from fluence using USRBDX? If so, I would recommend using the AUXSCORE card with your USRBDX. There are several sets of fluence-to-dose conversion coefficients built into FLUKA that you may use. Note that you also need to specify DOSE-EQ scoring for WHAT(2) of your USRBDX card.
Below is a link to the AUXSCORE card in the manual.
http://www.fluka.org/fluka.php?id=man_onl&sub=11
Cheers!
Ted
From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of ???
Sent: Monday, November 25, 2019 11:58 AM
To: fluka-discuss_at_fluka.org
Subject: [fluka-discuss]: to get efficient dose
Dear fluka experts:
I want to get efficient dose using conversion coefficient from flux to efficient dose,the flux can be obtained from usrbdx card,
i also obtained the exact conversion coefficient,how should i do to attach conversion coefficient with usrbdx card?
best regards
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Dec 06 2019 - 14:41:04 CET