Re: [fluka-discuss]:

From: Andrea Fontana <andrea.fontana_at_pv.infn.it>
Date: Fri, 6 Dec 2019 15:23:23 +0100

Hi,
    as you can see in the manual for the USRBIN card (note 5),
energy deposition is expressed in GeV per cm3 per unit primary
weight. See also the lecture on scoring:

https://agenda.infn.it/event/20624/contributions/105895/attachments/68619/85014/AdvancedScoring2019.pdf

Kind regards,
Andrea

On 06/12/2019 13:18, 李立华 wrote:
> What is USRBIN command result's units of total deposited energy density?
>
> -----原始邮件-----
> *发件人:*"Liang, Taiee" <taiee.liang_at_desy.de>
> *发送时间:*2019-11-26 21:01:42 (星期二)
> *收件人:* "李立华" <13691416247_at_ciae.ac.cn>, fluka-discuss_at_fluka.org
> *抄送:*
> *主**题:* RE: [fluka-discuss]: to get efficient dose
>
> Dear 李立华,
>
> Please keep the emails on the fluka-discuss mailing list as well.
>
> Yes, it is possible to filter the result for effective does of neutron
> with WHAT(2) of AUXSCORE. By default it is for all particles
> “ALL-PART”, so your card should instead have either the FLUKA particle
> code “8.0” or with the name based input “NEUTRON”. In this way, your
> neutron fluence from USRBDX is multiplied by the dose conversion
> coefficients.
>
> Cheers!
>
> Ted
>
> *From:*李立华[mailto:13691416247_at_ciae.ac.cn]
> *Sent:* Tuesday, November 26, 2019 1:21 PM
> *To:* liang, taiee
> *Subject:* Re: RE: [fluka-discuss]: to get efficient dose
>
> Can neutron effective dose be obtained using this solution?
>
> best regards
>
>
> -----原始邮件-----
> *发件人:*"Liang, Taiee" <taiee.liang_at_desy.de>
> *发送时间:*2019-11-25 22:18:37 (星期一)
> *收件人:* "李立华" <13691416247_at_ciae.ac.cn>, fluka-discuss_at_fluka.org
> *抄送:*
> *主**题:* RE: [fluka-discuss]: to get efficient dose
>
> Dear 李立华,
>
> If I understand your question, I believe you are asking how to
> calculate “effective” dose from fluence using USRBDX? If so, I would
> recommend using the AUXSCORE card with your USRBDX. There are several
> sets of fluence-to-dose conversion coefficients built into FLUKA that
> you may use. Note that you also need to specify DOSE-EQ scoring for
> WHAT(2) of your USRBDX card.
>
> Below is a link to the AUXSCORE card in the manual.
>
> http://www.fluka.org/fluka.php?id=man_onl&sub=11
>
> Cheers!
>
> Ted
>
> *From:*owner-fluka-discuss_at_mi.infn.it
> [mailto:owner-fluka-discuss_at_mi.infn.it] *On Behalf Of *???
> *Sent:* Monday, November 25, 2019 11:58 AM
> *To:* fluka-discuss_at_fluka.org
> *Subject:* [fluka-discuss]: to get efficient dose
>
> Dear fluka experts:
>
>     I want to get efficient dose using conversion coefficient from
> flux to efficient dose,the flux can be obtained from usrbdx card,
>
> i also obtained the exact conversion coefficient,how should i do to
> attach conversion coefficient with usrbdx card?
>
>    best regards
>
>
>
> *请注意*:在您阅读本邮件时,如您了解本邮件内容涉及商业秘密,请您遵守与发信人的商务约定,保守商业机密。如您发现本邮件内容涉及重要商业秘密或与国家秘密相关,请您即刻联系发信人,确认邮件内容是否适于通过互联网传递。
>

-- 
========================================================================
Dr. Andrea Fontana                    tel: +39 0382 987991
Istituto Nazionale                    fax: +39 0382 423241
di Fisica Nucleare
Sezione di Pavia                      e-mail: andrea.fontana_at_pv.infn.it
Via Bassi 6                           web   : www.pv.infn.it/~fontana
27100 PAVIA, Italy
========================================================================
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Dec 06 2019 - 20:38:01 CET

This archive was generated by hypermail 2.3.0 : Fri Dec 06 2019 - 20:49:34 CET