Dear Paola,
I am currently trying to simulate the irradiation of a material and the dose
from the activation. I am using??RADDECAY,
IRRPROFI, DCYTIMES and DCYSCORE cards, and I already have gone??through the
lectures from past courses. I believe that I am missing something important
because I am getting an empty data set every time, I get no files to process
at all.?? I am attaching here my input file.
Could you or anybody else try to help me please?
Thank you in advance.
Best regards,
Let??cia Braga da Rosa
Estagi??ria - Prote????o Radiol??gica - RADS
Centro Nacional de Pesquisa em Energia e Materiais (CNPEM)
Laborat??rio Nacional de Luz S??ncrotron (LNLS)
leticia.rosa_at_lnls.br
www.cnpem.br
??
cid:image001.png_at_01D4C444.68E95790
??
Aviso Legal: Esta mensagem e seus anexos podem conter informa????es
confidenciais e/ou de uso restrito. Observe atentamente seu conte??do e
considere eventual consulta ao remetente antes de copi??-la, divulg??-la ou
distribu??-la. Se voc?? recebeu esta mensagem por engano, por favor avise o
remetente e apague-a imediatamente.
Disclaimer: This email and its attachments may contain confidential and/or
privileged information. Observe its content carefully and consider possible
querying to the sender before copying, disclosing or distributing it. If you
have received this email by mistake, please notify the sender and delete it
immediately.
??
____________________________________________________________________________
De: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> em nome
de Paola Sala <paola.sala_at_mi.infn.it>
Enviado: domingo, 19 de janeiro de 2020 11:13
Para: fluka-discuss_at_fluka.org <fluka-discuss_at_fluka.org>
Assunto: Re: [fluka-discuss]: how to use FLUKA to score dose equivalent ??
Dear Obed,
It is difficult to help without knowing exactly what you wish to do.
If you wish to simulate both the irradiation of your material and the dose
from the activation, you can do it in a single run by using the RADDECAY,
IRRPROFI, DCYTIMES and DCYSCORE cards
If you already have a distribution of radioactive nuclei, you can input
them (one isotope at a time) through the BEAM card with sdum ISOTOPE. The
source can be distributed within a given volume, see options CYLY-VOL etc.
Dose equivalent ca be scored directly by asking DOSE-EQ as quantity. It is
computed from particle fluences convoluted with conversion factors.
I strongly suggest you to go through lectures from past courses, for
instance
https://indico.cern.ch/event/694979/contributions/2927152/attachments/16576
58/2654336/Activation_2018.pdf
Hope this helps
Paola
> Dear FLUKA experts
>
> I want to use FLUKA to score dose equivalent from an activated material.
> How should I do that?
>
> Thanks in advance. Obed
>
> --
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> iThemba LABS
> Old Faure Road
> Faure
> P. O. Box 722
> Somerset West, 7129
> South Africa
> www.tlabs.ac.za
>
> Dr Obed Shirinda
> Computational Physicist: Instrumentation and Information Technology
> Department
> Office no: J-bolck, J158
> Tel:???? +27 (0) 21 843 1547
> Fax:???? +27 (0) 21 843 3525
> Cell:?? +27 (0) 72 056 4314/ +27 (0) 78 253 6798
> email: obed_at_tlabs.ac.za
> Alternative email: obedshirinda_at_yahoo.co.uk
>???????????????????????????????????????? obedshirinda_at_gmail.com
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
>
>
>
> __________________________________________________________________________
> You can manage unsubscription from this mailing list at
> https://www.fluka.org/fluka.php?id=acc_info
>
* ..+....1....+....2....+....3....+....4....+....5....+....6....+....7...
*
* Sirius: Roof
TITLE
Teste de Ativacao
GLOBAL 2000. 1. 1.
* DEFAULT PRECISIO: see page 101 from Tutorial
DEFAULTS PRECISIO
*
*
*
* FLUKA input produced by ALIFE from:
* /home/ott/flsir/sirius.alife
* User: ott
* Date: Di 9. Jun 19:48:11 CEST 2015
MATERIAL 2.66 26. AL5080
MATERIAL 2.51 27. B4C
MATERIAL 3.637 28. BACONC
MATERIAL 56. 137.33 3.59 29. BARIUM
MATERIAL 5. 10.811 2.34 30. BORON
MATERIAL 17. 35.4527 2.9947E-3 31. CHLORINE
MATERIAL 24. 51.9961 7.19 32. CHROMIUM
MATERIAL 3.70 33. HAEMATIT
MATERIAL 18.5 34. HPM1850
MATERIAL 1. 1.0079 8.988E-5 3. 1.HYDROGEN
MATERIAL 25. 54.93805 7.44 35. MANGANES
MATERIAL 42. 95.94 10.2 36. MOLYBDEN
MATERIAL 41. 93. 8.4 37. NIOBIUM
MATERIAL 15. 30.97376 2.2 38. PHOSPHO
MATERIAL 2.35 39. PITWALL
MATERIAL 0.95 40. POLYETHE
MATERIAL 19. 39.10 0.862 41. POTASSIU
MATERIAL 1.6 42. SAND
MATERIAL 0.001205 43. STDAIR
MATERIAL 2.96E-4 44. STDAIR1
MATERIAL 8.11 45. STEEL
MATERIAL 8.11 46. STEEL2
MATERIAL 16. 32.066 2. 47. SULFUR
MATERIAL 1.01 48. TISSEYE
MATERIAL 1.05 49. TISSGEN
MATERIAL 1.05 50. TISSTUM
MATERIAL 1. 51. WATER
MATERIAL 1.8 52. WETSOIL
MATERIAL 2.2 53. DIOXSI
* Choosing Bisphenol A as glue. Check correct information!!!
http://www.lesker.com/msds/pdfs/b3feddd2e786b88ac6354dcf0bc56168edc047c6ad23a03ffe574c4de.pdf
* Density from STYCAST 2850 FT:
http://lartpc-docdb.fnal.gov/0000/000059/001/stycas2850.pdf
MATERIAL 2.4 54. BPAdenso
MATERIAL 7.85 55. ACO
* Stainless steel AISI316LN
MATERIAL 7.8 SS316LN
COMPOUND 0.67145 IRON 0.185 CHROMIUM 0.1125 NICKELSS316LN
COMPOUND 0.02 MANGANES 0.01 SILICON 0.00045 PHOSPHOSS316LN
COMPOUND 0.0003 SULFUR 0.0003 CARBON SS316LN
*
* Residual gas in the straight section (density corresponds to 1 atm)
MATERIAL 2.96E-4 GAS
COMPOUND -0.258427 HYDROGEN -0.337079 CARBON -0.404494 OXYGENGAS
MAT-PROP 1. GAS
COMPOUND 1. SILICON 2. OXYGENDIOXSI
COMPOUND 15. CARBON 16. HYDROGEN 2. OXYGENBPAdenso
COMPOUND -0.948 ALUMINUM -0.045 MAGNESIU -0.007 MANGANESAL5080
COMPOUND 4. BORON 1. CARBON B4C
COMPOUND -0.004 HYDROGEN -0.312 OXYGEN -0.001 SODIUMBACONC
COMPOUND -0.004 MAGNESIU -0.006 ALUMINUM -0.018 SILICONBACONC
COMPOUND -0.1 SULFUR -0.046 CALCIUM -0.001 MANGANESBACONC
COMPOUND -0.088 IRON -0.421 BARIUM BACONC
COMPOUND -0.506 IRON -0.339 OXYGEN -0.005 BORONHAEMATIT
COMPOUND -0.068 SILICON -0.048 CALCIUM -0.019 MAGNESIUHAEMATIT
COMPOUND -0.01 ALUMINUM -0.004 HYDROGEN -0.001 MANGANESHAEMATIT
COMPOUND -97.5 TUNGSTEN -1. IRON -1.5 NICKELHPM1850
COMPOUND -49.5 OXYGEN -0.5 BORON -20. SILICONPITWALL
COMPOUND -19.5 CALCIUM -3. ALUMINUM -1. SODIUMPITWALL
COMPOUND -1.4 IRON -0.6 HYDROGEN -3. CARBONPITWALL
COMPOUND -0.5 MAGNESIU -1. POTASSIU PITWALL
COMPOUND 2. HYDROGEN 1. CARBON POLYETHE
COMPOUND -0.03 HYDROGEN -0.63 OXYGEN -0.02 MAGNESIUSAND
COMPOUND -0.04 ALUMINUM -0.23 SILICON -0.03 CALCIUMSAND
COMPOUND -0.02 IRON SAND
COMPOUND -0.000124 CARBON -0.755267 NITROGEN -0.231781 OXYGENSTDAIR
COMPOUND -0.012827 ARGON STDAIR
COMPOUND -0.25847 HYDROGEN -0.337079 CARBON -0.404494 OXYGENSTDAIR1
COMPOUND STDAIR1
MAT-PROP 1. STDAIR1
COMPOUND -0.6281 IRON -0.13 NICKEL -0.185 CHROMIUMSTEEL
COMPOUND -0.025 MOLYBDEN -0.02 MANGANES -0.01 SILICONSTEEL
COMPOUND -0.0003 CARBON -0.00045 PHOSPHO -0.00015 SULFURSTEEL
COMPOUND -0.001 NITROGEN STEEL
COMPOUND -0.6119 IRON -0.14 NICKEL -0.185 CHROMIUMSTEEL2
COMPOUND -0.03 MOLYBDEN -0.02 MANGANES -0.01 SILICONSTEEL2
COMPOUND -0.0003 CARBON -0.00045 PHOSPHO -0.00015 SULFURSTEEL2
COMPOUND -0.0022 NITROGEN STEEL2
COMPOUND -10.6 HYDROGEN -28.4 CARBON -2.6 NITROGENTISSEYE
COMPOUND -57.8 OXYGEN -0.2 SULFUR -0.2 CHLORINETISSEYE
COMPOUND -0.1 POTASSIU -0.1 PHOSPHO TISSEYE
COMPOUND -10.6 HYDROGEN -28.4 CARBON -2.6 NITROGENTISSGEN
COMPOUND -57.8 OXYGEN -0.2 SULFUR -0.2 CHLORINETISSGEN
COMPOUND -0.1 POTASSIU -0.1 PHOSPHO TISSGEN
COMPOUND -10.6 HYDROGEN -28.4 CARBON -2.6 NITROGENTISSTUM
COMPOUND -57.8 OXYGEN -0.2 SULFUR -0.2 CHLORINETISSTUM
COMPOUND -0.1 POTASSIU -0.1 PHOSPHO TISSTUM
COMPOUND 2. HYDROGEN 1. OXYGEN WATER
COMPOUND -3. HYDROGEN -62. OXYGEN -2. MAGNESIUWETSOIL
COMPOUND -4. ALUMINUM -2. IRON -4. CALCIUMWETSOIL
COMPOUND -23. MUSCLEST WETSOIL
COMPOUND -0.0029 CARBON -0.002 COPPER -0.98 IRONACO
COMPOUND -0.0103 MANGANES -0.0004 PHOSPHO -0.0028 SILICONACO
COMPOUND -0.0005 SULFUR ACO
GEOBEGIN 0.0 COMBNAME
3 0 LABORDE
*
*
* BODY DEFINITIONS
* ----------------
*
* xyz origin is at the centre of the front of the standard target
* x-axis up
* y-axis points towards the right (in comparison to the flight direction of e-)
* z-axis coincides with the beam-axis
*
* =====================================
* ----------------------------General Definitions-------------------------------------
* =====================================
*
* external void
*
RPP Blackhol -999999. 999999. -999999. 999999. -999999. 999999.
*
* boundaries of geometry
*
RPP Air -200. 1150. -350. 350. -517. 4620.
* =====================================
* -----------BEAMLINES (z=0, y=0, x=0 center of straight)-----------
* =====================================
*
*
* Storage ring
ZCC ExtPipe 0.0 0.0 3.175
ZCC IntPipe 0.0 0.0 3.025
* Booster externo
ZCC BoosterO 0.0 320. 1.25
* Booster interno
ZCC BoosterI 0.0 320. 1.2
* Plano dipolo UP
XYP Dip1U 517.
* Plano dipolo down
XYP Dip1D 518.2
* Camara do dipolo externa feita de steel
RPP CamdipO -1.4 1.4 -10. 40. 517. 628.43
* Camara do dipolo interna feita de steel
RPP CamdipI -1.3 1.3 -9.9 39.8 517. 628.43
* plano do dipolo inclinado interno
PLA DipIn 0.0 .996195 -0.0871557 0.0 -53.25312345763 -203.7035708751
* Plano inclinado do dipolo externo
PLA DipOut 0.0 .996195 -0.0871557 0.0 -53.05348942353 -203.7035388572
* Piso in (limite interno) SR/Booster Tunnel
*
* Beamheight 1.4 m
YZP PisoIn -140.
* piso out (limite externo)
YZP PisoOut -200.
YZP TetoIn 190.
* Limite externo do teto do anel
YZP TetoOut 290.
* Limite externo do teto da cabana
YZP RoofOut 240.
*
* Y Z R
XCC TunelIn 8255.8 0.0 7886.8
XCC TunelOut 8255.8 0.0 7806.8
* Parte interna da parede externa do tunel
XZP TunExIn -117.7
* Parte externa da parede externa do t??nel
XZP TunExtO -222.9
* Hx Hy Hz x y z
PLA LeftDI 0.0 .99254662698443 -.121869261095 0.0 119.5141628834
2376.8546849702
PLA LeftDO 0.0 .99254662698443 -.121869261095 0.0 124.65759594161
3233.1202168871
*
XYP FrontI 2370.
XYP FrontO 2520.
RCC plugin 0.0 0.0 2215.78 0.0 0.0 254.21956911467237 5.5
RCC plugo 0.0 0.0 2470. 0.0 0.0 35. 15.
RCC Plugo1 0.0 0.0 2520. 0.0 0.0 -15. 23.3
XYP GSDown 2295.8
TRC body3 0.0 0.0 1397.2 0.0 0.0 9.4000000000001 1.2 .4
XZP LeftDet -0.75
XZP RightDet 0.75
*
*
* New Detectors Upstream
*
*
*
XYP P1DtDown 2544.9
XYP P1DtUp 2544.9
XYP P2DtDown 2650.6
XYP P2DtUp 2650.5
ZCC PipeInBH 0.0 0.0 3.025
*$start_transform ROT_OPT
*$end_transform
*
* ===================================================================
*
* Second Crystal and Frame 2 need be also translated:
* 0 mm for Bragg=60deg
* 9.973 mm for Bragg = 3deg
*$start_transform Trans2nd
*$end_transform
#if 0
YZP HO300 3.24
#endif
#if 0
YZP HO400 4.9
#endif
#if 0
XZP VOL100 -8.26
#endif
#if 0
XZP VOL200 -6.99
#endif
#if 0
XZP VOR100 1.99
#endif
#if 0
XZP VOL200 3.26
#endif
#if 0
XYP ZOB500 2798.15
#endif
XYP Z2800 2800.
XYP Det3 2935.0049666574
XYP Det4 2995.
XYP EndHutch 3490.78
RPP opright -140. 560.3 -300. -299.4 4360.78 5910.78
RPP opleft -140. 560.3 199.4 200. 4360.78 5910.78
RPP opdown -140. 560. -300. 200. 5910.18 5910.78
RPP opup -140. 560. -300. 200. 4360.78 4361.38
RPP oproof 560. 560.3 -300. 200. 4360.78 5910.78
RPP G_stop1 -50. 95. -50. 50. 3609.7 3614.7
RPP BS3din 0.8000000000000002 2.8 -1. 1. 2856. 2888.4
RCC Beampip 1.8 0.0 3616.7 0.0 0.0 733.85 2.8
RPP gamash -22. -9.9 -3.75 3.75 2279. 2286.5
RPP polibre1 10. 30. -11.75 11.75 2870. 2902.4
RPP polibre2 -30. -10. -11.75 11.75 2870. 2902.4
RCC gamahol 11.8 9.6 2314.1 0.0 0.0 -10.2 0.805
RPP GamaSec -10. 10. -10. 10. 3550. 3591.1
RPP PE5 -140. 262.86 -197.27 -195.27 2515.78 3616.7
RPP PE6 -140. 262.86 122.76 124.76 3005. 3616.7
RPP PE7 -140. 259.86 -195.27 122.76 3614.7 3616.7
RPP PE8 259.86 261.86 -195.27 122.76 2515.78 3617.7
RCC plugin1 122. 0.0 2370. 0.0 0.0 150. 8.
RCC plugo1 122. 0.0 2470. 0.0 0.0 35. 15.
RCC Plugo2 122. 0.0 2520. 0.0 0.0 -15. 23.3
RPP plugin2 178. 190. -112.7 -47.7 2370. 2520.
RPP plugin3 -140. -134. -112.7 -92.7 2370. 2520.
RPP hole1 -0.65 0.65 -0.9 0.9 1568.4 1571.6
RPP hole2 -0.825 0.825 -1.125 1.125 1953.5 1956.5
TRC hole3 0.0 0.0 2055.4 0.0 0.0 25.4 1.75 0.0
TRC hole4 0.0 0.0 2080. 0.0 0.0 -10.4 0.8 0.0
PLA hole6 -.997676180109 0.0 0.068133983032 -146.8470725472 0.0
10.028580564196
YZP hole5 0.6
XYP hole8 2145.65
XYP hole9 2158.9
XZP hole10 0.6
PLA hole11 0.0 -.997676180109 0.068133983032 0.0 -146.8417413139
10.028216479979
RPP hole12 -0.3 0.6 -.3 .6 2155.8 2158.9
PLA hole13 0.997676180109 0.0 0.068133983032 148.94688898925 0.0
10.171982662679
RPP hole14 -0.6 .3 -0.6 0.3 2186.7 2189.8034860134
YZP hole15 -0.6
XZP hole16 -0.6
PLA hole17 0.0 0.997676180109 0.068133983032 0.0 148.94416996318
10.171796973095
PLA hole18 .9945218953682 0.0 .10452846326765 -.5381554320514 -2.18194440448
2216.5202069136
XZP hole19 1.1
XZP hole20 -1.1
YZP hole21 -1.4
YZP hole22 -.6
#if 0
RPP G_stop2 -126.75 -21.25 -50. 42.5 2323. 2333.
#endif
RPP parede1 -140. 200. -205. -200. 2510. 3340.
RPP parede3 -140. 200. 100. 110. 2828.5 3355.
RPP parede4 -140. 200. -205. 101. 3340. 3355.
RPP parede6 200. 208. -205. -12. 2515. 3355.
RPP parede7 200. 208. -12. 110. 2515. 3355.
RPP chicaca1 130. 189.8 -117.4 -40. 2349.22 2354.22
RPP chicaca2 130. 189.6 -45. -40. 2354.22 2369.42
RCC esp1 0.0 0.0 3000. 0.0 0.0 20. 4.
RCC killel 0.0 0.0 517. 0.0 0.0 1.2 5.
RPP Shield1 -140. -135. -105. -95. 2366. 2386.
RCC RefLim -76.75 0.0 2323. 0.0 0.0 10. 2.405
RCC plugo2 0.0 0.0 2470.72 0.0 0.0 23.5 14.
RCC plugo3 0.0 0.0 2494.22 0.0 0.0 10.6 14.
RCC Plugo3 0.0 0.0 2520. 0.0 0.0 -14.58 22.3
* Backwall inside the hutch
XYP BackIn 3302.
* Backwall outside the hutch
XYP BackOut 3310.
* Sidewall inside the hutch
XZP SideIn -218.9
* Limite interno do teto da cabana
YZP RoofIn 236.
XYP hole27 2950.
XYP hole28 2953.175
XYP hole29 2951.755
* Camara de v??cuo ap??s Out Shielding Wall
RCC Cilin1 0.0 0.0 2520. 0.0 0.0 433.025 3.025
RPP Cilin2 -0.2 1.95 -1.7 1.7 2948.245 2951.755
RPP ExtP2 0.0 1.8 -1.85 1.86 2948.1 2951.905
RCC Cilin3 1.8 0.0 2946.975 0.0 0.0 153.175 3.175
RCC ExtP3 1.8 0.0 2946.825 0.0 0.0 153.275 3.175
RCC Cilin4 1.8 0.0 3100. 0.0 -6.960090164005 1160.0000174592 3.025
RCC ExtP4 1.8 0.0 3100. 0.0 -6.96099017925 1160.1500180592 3.175
* Delimita????es ap??s Out Shielding Wall
YZP hole30 11.743
YZP hole31 3.743
YZP hole32 -0.143
YZP hole33 -8.143
XYP hole34 4000.
XYP hole35 3260.
XYP hole36 3260.
XYP hole37 4620.
XYP EndPlug 3320.3
PLA hole391 5.789631486E-15 94.551857559932 -32.55681544572 -3.67956188E-18
-218.8616214092 2957.2900834755
PLA hole392 5.789631486E-15 94.551857559932 -32.55681544572 -8.25977189E-18
-218.5848923117 2957.2464471477
PLA hole393 5.789631485710341E-15 94.55185755993169 -32.556815445715664 0.0
-218. 2957.2
PLA hole401 1.737290959E-14 283.72114484672 -97.69302464488 4.712299095E-18
-222.5805179143 2958.5899934959
PLA hole402 1.737290959E-14 283.72114484672 -97.69302464488 8.072563061E-18
-222.9181650405 2958.654605583
PLA hole403 1.7372909594347953E-14 283.7211448467207 -97.69302464488273 0.0
-223.5 2958.7
PLA plano1m5 2.094269369E-14 342.02014332567 939.69262078591 -1.42895086E-17
167.76176777107 3048.8000558806
PLA plano2m 2.094269369E-14 342.02014332567 939.69262078591 -1.90892316E-15
115.17595761571 2904.321729895
* Tungsten Stop1
RPP Stop1Out -3.9 7.5 -5.65 5.65 3050. 3060.
ZCC Stop1In 1.8 0.0 0.3175
* Tungsten Stop2
RPP Stop2Out -3.15 11.25 -5.05 5.05 3250. 3260.
RCC Stop2In 1.8 0.0 3100. 0.0 -1.2000084233532913 199.99881599809487 0.3175
* Fe Gamma Shutter
RPP FeGSOut 140. 152.1 -3.75 3.75 2285. 2310.
ZCC FeGSIn 0.0 0.0 0.375
#if 0
RPP FMaskOu -21.55 21.55 -21.55 21.55 2075. 2095.
#endif
* Fe Mask
RCC FMaskOut 50. 0.0 2047.6049877819 0.0 0.0 24.6 3.81
TRC FMaskIn1 50. 0.0 2047.6049877819 0.0 0.0 0.93941 1.54 1.14
TRC FMaskIn2 50. 0.0 2048.5449877819 0.0 0.0 18.7949 1.14 0.155
TRC FMaskIn3 50. 0.0 2067.3389877819 0.0 0.0 4.86569 0.155 0.41
PLA FMaskIn4 .99452189536828 0.0 .10452846326765 50. 0.0 2057.
TRC FSlitIn 0.0 30. 2127. 0.0 0.0 10.5 0.78 0.072
RCC TubeInt 1.8 0.0 3270. 0.0 0.0 730. 3.0066592756746
RCC TubeExt1 1.8 0.0 3100. 2.6819629175467453E-16 -4.3799778342850075
729.9868600147345 10.
RCC TubeExt2 1.8 0.0 3100. 2.6819629175467453E-16 -4.3799778342850075
729.9868600147345 3.425
* XBPM-1
RCC XBPM1Out 183.3588540639 0.0 1578.1598856204 0.0 0.0 6.7 5.65
RPP XBPM1In1 182.6338540639 184.0838540639 -1.04 1.04 1578.1598856204
1580.6598856204
RPP XBPM1In2 182.8838540639 183.8338540639 -0.79 0.79 1580.6598856204
1581.1598856204
RPP XBPM1In3 177.7088540639 189.0088540639 -5.65 5.65 1581.1598856204
1581.6598856204
RPP XBPM1In4 182.7838540639 183.9338540639 -0.94 0.94 1581.6598856204
1584.8598856204
PLA XBPM1In5 0.0 -.9950555699611 .09931974974363 183.3588540639
-.9090958024725 1579.4715765496
PLA XBPM1In6 0.0 .9950555699611 .09931974974363 183.3588540639 .89037894179985
1579.6589253111
PLA XBPM1In7 -.9950555699612 0.0 .09931974974363 182.7012788679 0.0
1578.8355950428
PLA XBPM1In8 .99505556996123 0.0 .09931974974364 184. 0.0 1579.
* XBPM-2
RCC XBPM2Out 184.12954977239 0.0 1954.7029494594 0.0 0.0 6.7 5.65
RPP XBPM2In1 183.22954977239 185.02954977239 -1.275 1.275 1954.7029494594
1957.2029494594
RPP XBPM2In2 183.47954977239 184.77954977239 -1.026 1.024 1957.2029494594
1957.7029494594
RPP XBPM2In3 178.47954977239 189.77954977239 -5.65 5.65 1957.7029494594
1958.2029494594
RPP XBPM2In4 183.47954977239 184.97954977239 -1.125 1.125 1958.2029494594
1961.4029494594
PLA XBPM2In5 0.0 -.9950555699612 .09931974974364 184.12954977239 -1.275
1954.7029494594
PLA XBPM2In6 0.0 .99505556996123 .09931974974364 184.12954977239
1.2159420092094 1955.2545406835
PLA XBPM2In7 -.9950555699612 0.0 .09931974974364 183.33924379772 0.0
1955.8019818671
PLA XBPM2In8 .99505556996123 0.0 .09931974974364 185. 0.0 1955.
* Photon Shutter
RCC PSOut 56. 0.0 2197.5 0.0 0.0 16. 3.81
RCC PSIn1 56. 0.0 2197.5 0.0 0.0 1.5 1.925
RPP PSIn2a 54.8 57.2 -0.6 0.6 2199. 2210.4
PLA PSIn2b .99452189536824 0.0 .10452846326765 55.974168960295 0.0
2210.6972850483
RPP PSIn3 54.8 56. -0.6 0.6 2210.4 2212.
RCC PSIn4 56. 0.0 2212. 0.0 0.0 1.5 1.925
* HPS-1
RPP HPS1Out 144.351 185.791 -20.72 20.72 2155. 2165.5
RPP HPS1In 165. 165.142 -.071 .071 2155. 2165.5
* HPS-2
RPP HPS2Out 144.352 185.792 -20.72 20.72 2180. 2190.5
RPP HPS2In 165. 165.144 -.072 .072 2180. 2190.5
* Slits 1
RCC SlitsOut 61.450934381378 0.345 2121.5 0.0 0.0 16. 3.81
RCC SlitsIn3 61.450934381378 0.35 2135.3 0.0 0.0 2.2 1.945
RPP SlitsIn2 60.655934381378 61.555934381378 -0.45 0.45 2132.1 2135.3
RPP SlitsIn1 60.655934381378 62.245934381378 -0.45 1.14 2121.5 2132.1
PLA SlitsIn4 0.0 .99780146829221 .06627390040001 61.105855739833
1.1044855544075 2122.1069399228
PLA SlitsIn5 .997801468292 0.0 .0662739004 62.16820738105 0.0 2122.7572721094
* Slits 2
RCC SlitsOu1 60.760934381378 -0.345 2157.5 0.0 0.0 16. 3.81
RCC SlitsIn6 60.760934381378 -0.35 2171.3 0.0 0.0 2.2 1.945
RPP SlitsIn7 60.655934381378 61.555934381378 -0.45 0.45 2168.1 2171.3
RPP SlitsIn8 59.965934381378 61.555934381378 -1.14 .45 2157.5 2168.1
PLA SlitsIn9 0.0 -.9978014682922 .06627390040001 61.105855739833
-1.114525195483 2157.8705706014
PLA SlitsI10 -.997801468292 0.0 .0662739004 60. 0.0 2158.
* Plug
RCC PlugPb1 1.8 0.0 3100. 4.2617492936359216E-16 -6.959964777767953
1159.9791200234133 5.075
RCC Plughole 0.0 0.0 3100. 4.2617492936359216E-16 -6.959964777767953
1159.9791200234133 3.
RPP PlugPb2 -8.75 12.35 -11.850000000000001 9.25 3310.3 3311.3
RPP PlugPb3 -8.75 12.35 -11.850000000000001 9.25 3311.3 3313.84
RPP PlugPb4 -6.21 9.81 -9.31 6.71 3311.3 3313.84
#if 0
RCC PlugPb2 1.8 -1.4 3310. 0.0 0.0 1.500000000000 15.
#endif
#if 0
RCC PlugPb3 1.8 -1.4 3311.5 0.0 0.0 1.3000000000002 15.
#endif
#if 0
RCC PlugPb4 1.8 -1.4 3311.5 0.0 0.0 1.2999999999999 13.
#endif
RCC PlugPb5 1.8 0.0 3100. 2.6819629175467453E-16 -4.3799778342850075
729.9868600147345 3.825
* Guilhotina
RPP Guilh -48.2 51.8 -50. 50. 3297. 3302.
* Guilhotina
RPP Guilh2 -8.75 12.35 -11.85 9.2 3310.3 3320.6
RCC Cilin5 1.8 0.0 3100. 0.0 -6.960090164005 1160.0000174592 1.755
* Tungsten Stop1
RPP Stop1Ou1 -3.9 7.5 -5.65 5.65 3060. 3070.
* Tungsten Stop2
RPP Stop2Ou1 -3.15 11.25 -5.05 5.05 3260. 3270.
XYP hole41 3318.
* =====================================
* -----------BEAMLINES (z=0, y=0, x=0 center of straight)-----------
* =====================================
*
*
* Storage ring
ZCC ExtPipe1 0.0 0.0 3.175
ZCC IntPipe1 0.0 0.0 3.025
* Plano dipolo down
XYP Dip1D1 518.2
*
* boundaries of geometry
*
RPP Air1 -200. 1150. -350. 350. -517. 4620.
RPP gamash1 -22. -9.9 -3.75 3.75 2279. 2286.5
XYP FrontO1 2520.
* Fe Mask
RCC FMaskOu1 0.0 0.0 2075. 0.0 0.0 24.6 3.81
* Fe Gamma Shutter
RPP FeGSOut1 -3.75 8.35 -3.75 3.75 2321. 2346.
* XBPM-1
RCC XBPM1Ou1 183.3588540639 0.0 1578.1598856204 0.0 0.0 6.7 5.65
* XBPM-2
RCC XBPM2Ou1 184.12954977239 0.0 1954.7029494594 0.0 0.0 6.7 5.65
* HPS-1
RPP HPS1Out1 144.351 185.791 -20.72 20.72 2155. 2165.5
* HPS-2
RPP HPS2Out1 144.352 185.792 -20.72 20.72 2180. 2190.5
* Photon Shutter
RCC PSOut1 0.6 0.0 2219. 0.0 0.0 16. 3.81
* Slits
RCC SlitsOu2 0.345 0.345 2134. 0.0 0.0 16. 3.81
* Slits
RCC SlitsOu3 -0.345 -.345 2170. 0.0 0.0 16. 3.81
* Plano dipolo UP
XYP Dip1U1 517.
XYP hole42 2953.175
RPP Cilin6 -0.2 1.95 -1.7 1.7 2948.245 2951.755
XYP hole43 2953.025
RCC ExtP5 1.8 0.0 2946.825 0.0 0.0 153.325 3.175
RCC Cilin7 1.8 0.0 2946.975 0.0 0.0 153.125 3.025
RCC Cilin8 1.8 0.0 3100. 0.0 -6.960090164005 1160.0000174592 3.025
* Camara de v??cuo ap??s Out Shielding Wall
RCC Cilin9 0.0 0.0 2520. 0.0 0.0 433.025 3.025
* Tungsten Stop1
RPP Stop1Ou2 -3.9 7.5 -5.65 5.65 3050. 3060.
* Tungsten Stop2
RPP Stop2Ou2 -3.15 11.25 -5.05 5.05 3250. 3260.
RPP ExtP6 0.0 1.8 -1.85 1.86 2948.1 2951.905
RCC ExtP7 1.8 0.0 3100. 0.0 -6.96099017925 1160.1500180592 3.175
XYP hole44 3318.
RPP Targ1 -10. 10. -10. 10. 1870. 1890.
RPP Targ2 -10. 10. -10. 10. 1890. 1900.
*
* ------------------------------------------------------------------------
END
* include region data from:l
* /home/ott/flsir/sirius.alife
*
*
* =======================================
* =======================================
* =======================================
* ============REGION DEFINITIONS==============
* =======================================
* =======================================
* =======================================
*
*
*
*
*
*
*
*
* =======================================
* ---------------------- BLACK HOLE AROUND GEOMETRY ------------------------
* =======================================
*
*
*
BLACKHOL 5 +Blackhol -Air
KILLELE 5 +killel
* V??cuo da parte interna da camara de v??cuo da linha de luz ?? direita
InsideSR 5 +IntPipe +Dip1U+Air
* Iron vaccum pipe
InoxUpG1 5 +ExtPipe -IntPipe -Dip1D +Air -gamash +FrontO +FrontO -FMaskOut -FeGSOut -XBPM1Out -XBPM2Out
-HPS1Out -HPS2Out -PSOut -SlitsOut -SlitsOu1 -plugo -Plugo1
| +ExtPipe -IntPipe +Dip1U +Air
* Parte interna da camara de vacuo da linha de luz ?? esquerda at?? se????o de corte
InsideF1 5 +IntPipe -Dip1D +Air -gamash +FrontO +FrontO -FMaskOut -FeGSOut -XBPM1Out -XBPM2Out -HPS1Out
-HPS2Out -PSOut -SlitsOut -SlitsOu1 -plugo -Plugo1
* Parte interna da camara de vacuo da linha de luz ?? esquerda at?? se????o de corte
InsideF2 5 +Cilin1
| +Cilin2
| +Cilin7 -Stop1Out
| +Cilin4 -Stop1Out -Stop2Out -Guilh +BackIn
| +Stop2Out +Stop2In
| +Stop1Out +Stop1In
* BlackHole colimando para 1.5mm - Peda??o 3
BH3 5 +IntPipe -PipeInBH -Dip1D+Air-P1DtUp
*
*
*
*
* =======================================
* --------------------------------------- TUNNEL -----------------------------------------
* =======================================
*
*
*
*
* Floor
GROUNDFL 5 +Air -PisoOut +PisoIn
*
* Beneath Floor
SobrePis 5 +Air +PisoOut
* Ceiling
ROOF 5 +Air -TetoIn +TetoOut -TunExtO -TunelOut +FrontO
R13 5 +Air -TetoIn +TetoOut -LeftDO -TunelOut -FrontO -TetoIn
*
* left wall upstream
TUNELEXT 5 +Air -PisoIn +TetoIn -TunExtO +TunExIn +FrontO
*
* front wall
FRONTWAL 5 +Air -PisoIn +TetoIn -TunExIn +LeftDI +FrontO -FrontI -ExtPipe -plugin -plugo -Plugo1 -plugo1
-Plugo2 -plugin1-plugin2 -plugin3
| +plugin1 -Plugo2
|+plugin1 -plugo1
*
* left wall downstream
LEFTWALL 5 +Air -PisoIn +TetoIn -LeftDO +LeftDI -FrontO -FrontO
*
* right wall (circular)
TUNELIN 5 +Air -PisoIn +TetoIn -TunelOut +TunelIn
*
* ---------------------- TUNNEL AIR ---------------------------------
*
* upstream
TUNELAIR 5 +Air -PisoIn +TetoIn -TunExIn -TunelIn +Dip1U -ExtPipe
*
* around dipole chamber
AIRDIPD 5 +Air -PisoIn +TetoIn -TunExIn -Dip1U +Dip1D -killel
* downstream 1
AIRDOWNS 5 +Air -PisoIn +TetoIn -TunExIn -TunelIn -Dip1D +FrontI -ExtPipe -chicaca1 -chicaca2 -XBPM1Out
-XBPM2Out -HPS2Out -HPS1Out -Targ1 -Targ2
| +RefLim -ExtPipe
*
* downstream 2
AIRLEFT 5 +Air -PisoIn +TetoIn -LeftDI -TunelIn -FrontI -hole32 +hole31 -TubeExt1
*
* ---------------------- AIR OUTSIDE TUNNEL -------------------------------
*
* upstream left side
AIRTUNO 5 +Air -PisoOut +TunExtO +FrontO -PisoIn
| +Air -FrontO +TunExtO +BackOut +hole30 -hole31
| +Air -FrontO +TunExtO +BackOut +hole32 -hole33
* right side, AIR IN CENTER OF THE MACHINE
AIRCENTE 5 +Air -PisoOut +TunelOut -PisoIn
*
* above Tunnel upstream
AIRROOFO 5 +Air -TetoOut -TunExtO -TunelOut +FrontO
* above Tunnel downstream
R27 5 +Air -TetoOut -LeftDO -TunelOut -FrontO
PLUG 5 +plugo2 -plugin
| +plugo1 -plugin1
PLUGI 5 +plugin +plugo -ExtPipe
| +plugin -ExtPipe -FrontI -plugo
| +plugin2
| +plugin3
PLUGO1 5 +Plugo3 -plugin
| +Plugo2 -plugin1
| +plugo3
#if 0
STOP 5 +G_stop2 -RefLim
#endif
#if 0
GAMASH 5 +gamash -gamahol
| +ExtPipe +gamash -IntPipe
#endif
#if 0
MASC 5 +masc3 -hole3 -hole4
| +masc4 -hole10
| +masc4 +hole10 +hole11 -hole6 -hole12
| +masc4 +hole10 +hole11 -hole5
| +masc4 -hole11 -hole12
| +masc5 -hole14 -hole17
| +masc5 +hole16 -hole13 -hole14 -hole15
| +masc5 +hole13 +hole16 +hole17 -hole14 -hole15
| +masc5 +hole15 +hole17
| +masc5 +hole17 -hole13 -hole14 -hole16
| +masc6 +hole18 +hole19 +hole21 -hole20
| +masc6 +hole19 -hole18 -hole22
| +masc6 -hole19
| +masc6 +hole18 +hole20
| +masc6 -hole18 +hole20
#endif
* chicane
CHICAFER 5 +chicaca1
| +chicaca2
* air inside the hutch
AIRCAB 5 +Air +LeftDO -FrontO -PisoIn -SideIn -SideIn +BackIn +RoofIn -Cilin1 -ExtPipe -ExtP2 -ExtP3
+hole35 -ExtP4 -Cilin2 -Cilin3 -Cilin4 -Stop1Out -Stop2Out -hole393
| +Plugo1 -Plugo3
| +plugo -plugo3 -plugo2
| +Air +ExtPipe +hole35 -hole28 -Stop1Out -Stop2Out -ExtP3 -ExtP4 -ExtP5
| +Air -ExtP4 +BackIn +RoofIn -hole35 -SideIn -PisoIn +LeftDO -PlugPb2 -Guilh -hole393
| +Air -hole35 +hole31 -hole32 -ExtP3 +LeftDO -SideIn -ExtP4 -TubeExt1 +BackIn -BackOut
| +Air -LeftDI -FrontO -PisoIn +hole32
| +Air -FrontI +FrontO -PisoIn +BackIn +hole33 -LeftDI
| +Air -FrontI +FrontO -PisoIn +BackIn -hole33 +hole32 -LeftDI
| +Stop1In +Stop1Out -ExtP3
| +Stop2In +Stop2Out -ExtP4
| +Air -hole34 +TubeExt1
| +Air -FrontI +FrontO +TetoIn +BackIn -hole31 -LeftDI
| +Air -BackIn +TubeExt1 -ExtP4 +BackOut -PlugPb1
| +Air -LeftDI -FrontO +hole35 -hole31 +TetoIn
| +Air -LeftDI -FrontO -hole31 +TetoIn
| +Air -SideIn +plano2m -hole391 +hole393 -PisoIn +RoofIn
| +Air -plano2m +plano1m5 -hole392 +hole393 -PisoIn +RoofIn
* air outside the tunnel
AIROUT 5 +Air +BackOut +TunExtO -FrontO +TunExIn -PisoIn -hole30
| +Air -RoofOut -FrontO +hole37 +LeftDO
| +Air +BackOut +TunExtO -FrontO +TunExIn -PisoIn +hole31 -hole32
| +Air +BackOut +TunExtO -FrontO +TunExIn -PisoIn +hole33
| +Air -BackOut +TunExtO -hole30 -RoofIn +TetoOut
| +Air +TetoIn -hole32 +hole33 +TunExtO -hole35
| +Air -BackOut +TetoOut -PisoIn +LeftDO -ExtP4 -Guilh -PlugPb2 -PlugPb3 -PlugPb1 +EndPlug -Guilh2
| +Air +SideIn +hole31 -hole32 -BackOut
| +Air -hole34 +hole32 -hole33 +LeftDO -ExtP4
| +Air -BackOut +TetoOut -PisoIn +LeftDO -ExtP4 -Guilh -EndPlug -Guilh2
| +Air +hole403 -TunExtO +BackOut -PisoIn +TetoOut
| +Air -TunExtO +plano2m +hole401 -hole403 -PisoIn +RoofIn
| +Air -TunExtO -plano2m +plano1m5 +hole402 -hole403 -PisoIn +RoofIn
| +Air +PlugPb5 -ExtP4 +EndPlug -BackIn
| -ExtP4 +PlugPb1 -EndPlug +Guilh2
| +Air +Guilh -ExtP4 +TubeExt2
FOEWALL 5 +Air -BackIn +BackOut +RoofIn -SideIn -TubeExt1 +TetoOut -PisoIn +LeftDO -hole391
| +Air +SideIn -TunExtO -FrontO +BackOut -PisoIn +RoofOut -hole391
| +Air -RoofIn +RoofOut +hole37 -FrontO +LeftDO -TunExtO +BackOut -hole403
| +hole391 -hole401 -TunExtO +BackOut +RoofIn -PisoIn +plano2m
| +hole392 -hole402 -TunExtO +BackOut +RoofIn -PisoIn -plano2m +plano1m5
| +hole393 -hole403 -TunExtO +BackOut +RoofIn -PisoIn -plano1m5
XBPM1 5 +XBPM1Out -XBPM1In1 -XBPM1In2 -XBPM1In3 -XBPM1In4
| +XBPM1In1 -XBPM1In5 +XBPM1In6
| +XBPM1In1 -XBPM1In6
| +XBPM1In1 -XBPM1In7 +XBPM1In8
| +XBPM1In1 -XBPM1In8
| +XBPM1Out
XBPM2 5 +XBPM2Out -XBPM2In1 -XBPM2In2 -XBPM2In3 -XBPM2In4
| +XBPM2In1 -XBPM2In5 +XBPM2In6
| +XBPM2In1 -XBPM2In6
| +XBPM2In1 -XBPM2In7 +XBPM2In8
| +XBPM2In1 -XBPM2In8
| +XBPM2Out
* Tungsten Stop 1
WSTOP1 5 +Stop1Out -Stop1In
* Tungsten Stop 2
WSTOP2 5 +Stop2Out -Stop2In
#if 0
* Fe Gamma Shutter
GAMASHUT 5 +FeGSOut -FeGSIn
#endif
#if 0
* Fe Mask
FEMASK 5 +FMaskOut -FMaskIn2 -FMaskIn1 -FMaskIn3
#endif
#if 0
* Fe Slits (pdf manaca) - conflito com HPS-1
FESLITS 5 +FSlitOut -FSlitIn
#endif
#if 0
* Photon Shutter
PHOSHUT 5
#endif
HPS1 5 +HPS1Out -HPS1In
| +HPS1In
HPS2 5 +HPS2Out -HPS2In
| +HPS2In +HPS2Out
#if 0
* first Slits
SLITS1 5 +SlitsOut -SlitsIn1 -SlitsIn2 -SlitsIn3
| +SlitsIn1 +SlitsIn4 -SlitsIn5
| +SlitsIn1 +SlitsIn5 -SlitsIn4
| +SlitsIn1 -SlitsIn4 -SlitsIn5
#endif
#if 0
* second Slits
SLITS2 5 +SlitsOu1 -SlitsIn6 -SlitsIn7 -SlitsIn8
| +SlitsIn8 +SlitsIn9 -SlitsI10
| +SlitsIn8 +SlitsI10 -SlitsIn9
| +SlitsIn8 -SlitsIn9 -SlitsI10
#endif
* Lead Plug after hutch
PLUGPB 5 +PlugPb1 -PlugPb5 +EndPlug -BackIn -ExtP4
| +PlugPb2 -ExtP4 -PlugPb5
| +PlugPb3 -PlugPb4
* Guillotine
GUILHOT 5 +Guilh -TubeExt2
* Guillotine
GUILHOT1 5 +Guilh2 -ExtP4 -PlugPb2 -PlugPb3 -PlugPb1
| +PlugPb4 -PlugPb1
* Vaccum pipe
InoxUpG2 5 +ExtPipe1 -IntPipe1 -FrontO1 +hole42 +Air1 -Cilin6 +hole43 -Cilin3
| +ExtP5 -Cilin7 +Air1 -Cilin6 -Cilin8 -Cilin9 -Stop1Ou2 -Stop2Ou2
| +ExtP6 -Cilin6 +Air1 -Cilin7 -Cilin9
| -hole43 +hole42 +IntPipe1 -Cilin7 -Cilin8
| +ExtP7 -Cilin8 +Air1 -Cilin7 -Stop1Ou2 -Stop2Ou2 -Guilh +BackIn
| +ExtPipe1 -Cilin9 -hole43 +hole42 -Cilin7
* Inside pipe (optional)
InsideF3 5 +Cilin4 -Stop1Out -Stop2Out -BackIn
| +Guilh +Cilin4
* Vaccum pipe (optional)
InoxUpG3 5 +ExtP4 -Cilin4 +Air -Cilin3 -Stop1Out -Stop2Out -BackIn
| +Guilh +ExtP4 -Cilin4
TARG1 5 +Targ1 -ExtPipe
TARG2 5 +Targ2 -ExtPipe
END
1. 1. 1. 1. 1. 1. 1.
1. 1. 1. 1. 1. 1. 1.
1. 1. 1. 1. 1. 1. 1.
1. 1. 1. 1. 1. 1. 1.
1. 1. 1. 1. 1. 1. 1.
1. 1. 1. 1. 1. 1. 1.
1. 1.
GEOEND
ASSIGNMA BLCKHOLE BLACKHOL 0.0
ASSIGNMA STEEL InoxUpG1 0.0
ASSIGNMA GAS InsideSR 0.0
ASSIGNMA VACUUM InsideF1 0.0
ASSIGNMA PITWALL GROUNDFL 0.0
ASSIGNMA BLCKHOLE SobrePis 0.0
ASSIGNMA PITWALL ROOF 0.0
ASSIGNMA PITWALL R13 0.0
ASSIGNMA PITWALL TUNELEXT 0.0
ASSIGNMA PITWALL FRONTWAL 0.0
ASSIGNMA PITWALL LEFTWALL 0.0
ASSIGNMA BLCKHOLE TUNELIN 0.0
ASSIGNMA AIR TUNELAIR 0.0
ASSIGNMA AIR AIRDIPD 0.0
ASSIGNMA AIR AIRDOWNS 0.0
ASSIGNMA AIR AIRLEFT 0.0
ASSIGNMA AIR AIRTUNO 0.0
ASSIGNMA BLCKHOLE AIRCENTE 0.0
ASSIGNMA AIR AIRROOFO 0.0
ASSIGNMA AIR R27 0.0
ASSIGNMA VACUUM BH3 0.0
* Electron Beam (for Bremsstrahlung Simulation)
BEAM -3. 0.0 -1E-06 -1E-05 -1E-05 1.ELECTRON
* Electron Beam (for Bremsstrahlung Simulation)
BEAMPOS 0.0 0.0 -517. 0.0 0.0 0.0
LAM-BIAS 0.0 0.01 BLCKHOLE PHOTON
* activates heavy fragment evaporation (up to A=24), essential for activation
* calculations
PHYSICS 3. EVAPORAT
*PHYSICS 1000. 1000. 1000. 1000. 1000. 1000.PEATHRES
* coalescence, better to activate if light fragments are of interest (e.g.
* tritium)
PHYSICS 1. COALESCE
ASSIGNMA AIR InoxUpG2
ASSIGNMA POLYETHE PLUG 0.0
ASSIGNMA AIR PLUGI 0.0
ASSIGNMA ACO PLUGO1 0.0
*ASSIGNMA AIR STOP 0.0
*ASSIGNMA AIR GAMASH 0.0
*ASSIGNMA COPPER MASC
ASSIGNMA AIR AIRCAB
ASSIGNMA STEEL CHICAFER
ASSIGNMA AIR KILLELE
ASSIGNMA AIR AIROUT
ASSIGNMA AIR FOEWALL
ASSIGNMA AIR WSTOP1
ASSIGNMA AIR WSTOP2
*ASSIGNMA AIR GAMASHUT
*ASSIGNMA AIR FEMASK
*ASSIGNMA AIR FESLITS
ASSIGNMA AIR XBPM1
ASSIGNMA AIR XBPM2
*ASSIGNMA AIR PHOSHUT
ASSIGNMA AIR HPS1
ASSIGNMA AIR HPS2
*ASSIGNMA AIR SLITS1
ASSIGNMA AIR InoxUpG3
*ASSIGNMA AIR SLITS2
ASSIGNMA AIR PLUGPB
ASSIGNMA AIR GUILHOT
ASSIGNMA AIR InsideF3
ASSIGNMA AIR InsideF2
ASSIGNMA AIR GUILHOT1
ASSIGNMA COPPER TARG1
ASSIGNMA SS316LN TARG2
* ..+....1....+....2....+....3....+....4....+....5....+....6....+....7....+....8
* Suppress multiple scattering in the air target
MULSOPT 0.0 0.0 3. GAS 0.0
* Suppress Moller scattering in the air target
*EMFCUT 0.0 3.5 0.0 GAS 0.0ELPO-THR
* Kill beam electrons by a high energy transport cutoff at the end
* of the straight section
EMFCUT 3.5 0.000001 0.0 KILLELE
* Activates Gamma Interactions with Nuclei
*PHOTONUC 1. HYDROGEN _at_LASTMAT
* Activate muon pair coherent production
*
*PHOTONUC 1. 1.E-4 0.0 HYDROGEN _at_LASTMAT MUMUPAIR
PHOTONUC 1. 0.0 0.0 HYDROGEN _at_LASTMAT
* The hadronic inelastic interaction length of the particle is reduced by a multiplying factor 0.02.
*LAM-BIAS 0.0 0.02 PHOTON
* Desactivate bremsstrahlung and pair production in black hole region
*EMF-BIAS 1021. 0.0 6. BLACKHOL _at_LASTREG
* Defines the particle types to be discarded.
* In this case, neutrinos and antineutrinos.
DISCARD NEUTRIE ANEUTRIE
* Sets energy transport cutoffs for photons
PART-THR -1E-05 PROTON APROTON
* Sets energy transport cutoffs for antineutrons
PART-THR -1E-05 ANEUTRON _at_LASTPAR
* Energy threshold for electron and positron production in GeV
*EMFCUT -0.0001 1.0E-5 1. HYDROGEN _at_LASTMAT PROD-CUT
* Energy transport threshold for electrons/positrons/gammas in GeV
*EMFCUT -1E-05 1.0E-5 0.0 InsideSR _at_LASTREG
* ---------------------------- RUN -----------------------------------------------
RANDOMIZ 1.
START 1000.
STOP
* Irradiation profile
* -------------------
RADDECAY 1. 3.0 99999
* 7days intensity 4days intensity 7days intensity
IRRPROFI 604800. 100000. 345600. 0.0 604800. 100000.
* 4days intensity 7days intensit
IRRPROFI 345600. 0.0 604800. 100000.
* Specific activity
DCYSCORE 1. Copper-1h Inox-1h RESNUCLE
RESNUCLE 3. -61. TARG1 7425.05Copper-1h
RESNUCLE 3. -61. TARG2 3425.05Inox-1h
DCYSCORE 2. Copper-1m Inox-1m RESNUCLE
RESNUCLE 3. -62. TARG1 7425.05Copper-1m
RESNUCLE 3. -62. TARG2 3425.05Inox-1m
DCYSCORE 1. Copbin-1hInoxbin-1h USRBIN
USRBIN 11. ACTIVITY -63. 10. 0.0 1890.Copbin-1h
USRBIN 0.0 0.0 1870. 1. 1. 1. &
USRBIN 11. ACTIVITY -63. 10. 0.0 1900.Inoxbin-1h
USRBIN 0.0 0.0 1890. 1. 1. 1. &
DCYSCORE 2. Copbin-1mInoxbin-1m USRBIN
USRBIN 11. ACTIVITY -63. 10. 0.0 1890.Copbin-1m
USRBIN 0.0 0.0 1870. 1. 1. 1. &
* Cooling: 1hour 1month
DCYTIMES 3600. 2592000.
USRBIN 11. ACTIVITY -63. 10. 0.0 1900.Inoxbin-1m
USRBIN 0.0 0.0 1890. 1. 1. 1. &
* Dose equivalent
DCYSCORE 1. DoseEq1h DoseEq1h USRBIN
AUXSCORE USRBIN DoseEq1h EWT74
USRBIN 11. DOSE-EQ -64. 50. 0.0 2000.DoseEq1h
USRBIN 0.0 0.0 1800. 500. 1. 2000. &
DCYSCORE 2. DoseEq1m DoseEq1m USRBIN
AUXSCORE USRBIN DoseEq1m EWT74
USRBIN 11. DOSE-EQ -64. 50. 0.0 2000.DoseEq1m
USRBIN 0.0 0.0 1800. 500. 1. 2000. &
STOP
ActivationSync.flair
#!/usr/local/flair/flair
# FLUKA Project file
Version: 2
Title: Teste de Ativacao
Input: ActivationSync.inp
Submit: *Default
Tabs: 0.1 0.32 0.56 0.81 1.0
Page: Input
DefMain: True
LinkPrg: lfluka
F77bound: True
F77dline: False
# Run information
Run: <default>
Prev: 0
Last: 5
Status: 3
Pid: 0
StartRun: 0
Family: ActivationSync_aa ActivationSync_ab
# USRxxx data file: ActivationSync_61.rnc
Data: \I_\U.\e
Unit: 61
Type: r
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
# USRxxx data file: ActivationSync_62.rnc
Data: \I_\U.\e
Unit: 62
Type: r
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
# USRxxx data file: ActivationSync_63.bnn
Data: \I_\U.\e
Unit: 63
Type: b
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
# USRxxx data file: ActivationSync_64.bnn
Data: \I_\U.\e
Unit: 64
Type: b
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
End
# Run information
Run: ActivationSync_aa
Rnd: 1
Prev: 0
Last: 5
Status: 3
Pid: 0
StartRun: 1579007098
Parent: <default>
# USRxxx data file: ActivationSync_aa_61.rnc
Data: \I_\U.\e
Unit: 61
Type: r
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
# USRxxx data file: ActivationSync_aa_62.rnc
Data: \I_\U.\e
Unit: 62
Type: r
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
# USRxxx data file: ActivationSync_aa_63.bnn
Data: \I_\U.\e
Unit: 63
Type: b
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
# USRxxx data file: ActivationSync_aa_64.bnn
Data: \I_\U.\e
Unit: 64
Type: b
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
End
# Run information
Run: ActivationSync_ab
Rnd: 2
Prev: 0
Last: 5
Status: 3
Pid: 0
StartRun: 1579007098
Parent: <default>
# USRxxx data file: ActivationSync_ab_61.rnc
Data: \I_\U.\e
Unit: 61
Type: r
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
# USRxxx data file: ActivationSync_ab_62.rnc
Data: \I_\U.\e
Unit: 62
Type: r
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
# USRxxx data file: ActivationSync_ab_63.bnn
Data: \I_\U.\e
Unit: 63
Type: b
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
# USRxxx data file: ActivationSync_ab_64.bnn
Data: \I_\U.\e
Unit: 64
Type: b
Rule: +,\I\d\d\d_fort\.\U
Rule: +,\I\d\d\d_ftn\.\U
End
End
# Material
Material: MOLYBDEN
alpha: 0
color: #70B090
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: BARIUM
alpha: 0
color: #907010
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: ACO
alpha: 0
color: #B05070
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: PITWALL
alpha: 0
color: #50B010
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: STDAIR1
alpha: 0
color: #20B010
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: B4C
alpha: 0
color: #90D010
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: POLYETHE
alpha: 0
color: #30D0B0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: TISSTUM
alpha: 0
color: #7010B0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: DIOXSI
alpha: 0
color: #301070
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: TISSGEN
alpha: 0
color: #B010B0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: STDAIR
alpha: 0
color: #C0B0D0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: GAS
alpha: 0
color: #301030
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: SAND
alpha: 0
color: #D0B0D0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: CHLORINE
alpha: 0
color: #503010
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: SS316LN
alpha: 0
color: #401010
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: AL5080
alpha: 0
color: #D0D0D0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: NIOBIUM
alpha: 0
color: #7030D0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: WETSOIL
alpha: 0
color: #709030
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: BPAdenso
alpha: 0
color: #30D030
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: TISSEYE
alpha: 0
color: #E010D0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: MANGANES
alpha: 0
color: #B050D0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: HAEMATIT
alpha: 0
color: #803010
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: POTASSIU
alpha: 0
color: #70B0B0
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: HPM1850
alpha: 0
color: #901090
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: STEEL2
alpha: 0
color: #401090
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Material
Material: BACONC
alpha: 0
color: #50D090
fuzz: 0.0
ior: 1.0
shine: 10.0
specular: 0.0
End
# Geometry Information
Geometry:
Frame.bsplit: 0.5
Frame.tsplit: 0.5
Frame.vsplit: 0.5
End
# Geometry plot "GeoViewer Red plot"
Plot: Red
Format: .eps
Type: Geometry
basisu: 1 0 0
basisv: 0 1 0
boundaries: 1
coord: X-Y
extends: 100 75
labels: 1
layer: Media
origin: 0 0 0
subtype: Material
title: GeoViewer Red plot
End
# Geometry plot "GeoViewer Green plot"
Plot: Green
Format: .eps
Type: Geometry
basisu: 0 0 1
basisv: 1 0 0
boundaries: 1
coord: Z-X
extends: 100 75
labels: 1
layer: Media
origin: 0 0 0
subtype: Material
title: GeoViewer Green plot
End
# Geometry plot "GeoViewer Blue plot"
Plot: Blue
Format: .eps
Type: Geometry
basisu: 0 0 1
basisv: 0 1 0
boundaries: 1
coord: Z-Y
extends: 619.174 290.541
labels: 1
layer: Media
origin: 0 -60.9333 2903.19
subtype: Material
title: GeoViewer Blue plot
End
# Geometry plot "GeoViewer Magenta plot"
Plot: Magenta
Format: .eps
Type: Geometry
basisu: -1 0 0
basisv: 0 1 0
boundaries: 1
coord: X-Y
extends: 100 75
labels: 1
layer: Media
origin: 0 0 0
subtype: Material
title: GeoViewer Magenta plot
End
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
--_005_RO1P15201MB2156C0619B2F292ACA4D738F870C0RO1P15201MB2156_--
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Wed Jan 22 2020 - 15:04:49 CET