Dear Richardo,
I still have the same problem.
Status: waiting to attach
then Status: Running
after a few minutes Status: Time-out
If you have any other suggestions to solve this problem, I would appreciate it.
Best regards,
Marziyeh
From: "dos Santos Augusto, Ricardo" <rdossanto_at_bnl.gov>
To: "Tavakkoly, Marziyeh Sadat" <marziyeh.tavakkoly_at_xfel.eu>, "fluka-discuss" <fluka-discuss_at_fluka.org>
Sent: Friday, 31 May, 2024 21:06:11
Subject: [fluka-discuss]: Re: Time-out Error
Dear Marziyeh,
I believe that adding a GLOBAL card with SDUM=OLDFLAIR should fix the issue you are seeing.
Best regards,
Ricardo
Ricardo dos Santos Augusto
Brookhaven National Laboratory
Radiological Control Division
NSLS-II 745/5LC08B
Upton, NY 11973
Office: (631) 344 41 49
Cell: (631) 905 67 49
From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> on behalf of Tavakkoly, Marziyeh Sadat <marziyeh.tavakkoly_at_xfel.eu>
Sent: Friday, May 31, 2024 11:18 AM
To: fluka-discuss_at_fluka.org <fluka-discuss_at_fluka.org>
Subject: [fluka-discuss]: Time-out Error
Dear Fluka experts,
I installed the latest version of Fluka and Flair. When I run the input, I receive a time-out error. I know it is not due to my memory space. Could you please help me solve this problem? I have also attached the input file.
Thank you and best regards,
Marziyeh
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Jun 03 2024 - 13:13:51 CEST