RE: replica of complicated body

From: Gostishchev, Vitaliy Dr. <V.Gostishchev_at_gsi.de>
Date: Tue, 16 Nov 2010 16:50:08 +0100

Hello,

Thank you for your reply. I corrected that error but, unfortunately, I
still cannot see a replica in the corresponding position. I see only
RPP consisting of the blackhole material. It's fine but I expect that
the replica inside RPP can be seen, if I plot a geometry with a standard
geometry plotter in FLAIR. But it's not a case. What can be a reason for
that? Maybe geometry of the replica is too complicated?

Thank you for any suggestions.

Best regards,
Vitaliy

> -----Original Message-----
> From: owner-fluka-discuss_at_mi.infn.it
> [mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of Paola Sala
> Sent: 15 2010 . 9:55
> To: Gostishchev, Vitaliy Dr.
> Cc: fluka-discuss_at_fluka.org
> Subject: Re: replica of complicated body
>
>
> Hello,
> I find an error in the geometry: region Ped uses a body "ped"
> that is not defined Regards Paola
>
> > Dear FLUKA experts,
> >
> > I have a question concerning replicas in FLUKA. I cannot succeed with
> > replication of the complicated quadrupole. Maybe the whole input file
> > is too complicated or there is another reason. Nevertheless, I
> > created a quadrupole in the parking region and want to place its
> > replica in the position of z-axis from 294 to 356 cm. In fact, I am
> > going to exchange all the quadrupoles of this input by replicas in
> > order to reduce a number of bodies in the file. It is my first step
> > in that direction. Is transformation correct? Why I do not see a
> > replica in the mentioned above position, if I plot geometry in FLAIR?
> >
> > In the attachment you can find my input file and two files which have0
> > to be compiled for getting an executable file.
> >
> > Thank you for any assistance in advance.
> >
> > Best regards,
> > Vitaliy
> >
>
>
> Paola Sala
> INFN Milano
> tel. Milano +39-0250317374
> tel. CERN +41-227679148
>
>
Received on Tue Nov 16 2010 - 17:43:23 CET

This archive was generated by hypermail 2.2.0 : Tue Nov 16 2010 - 17:43:23 CET