Dear Fluka experts,
When I read the Fluka Manual,it says "the MULSOPT card sets the tracking conditions for multiple Coulomb scattering (MCS), for
both hadrons/muons and electrons/positrons.Can also be used to activate single scattering." In other words,this card can only be used to set single scattering for electrons,but not for protons.Right?
Last time,paola told me "for micro-sized geometries,single scattering should be set for all steps". Now, If the incident particles are proton beam,for micro-sized geometries,I must set single scattering for proton beam.Right? But,how could I do this?
Thanks for any suggestion.Thanks for your time.
Best Regards
YuanChen
> -----Original E-mail-----
> From: "Roberto Versaci" <roberto.versaci_at_gmail.com>
> Sent Time: 2013-10-26 19:34:30
> To: "fluka-discuss_at_fluka.org" <fluka-discuss_at_fluka.org>
> Cc:
> Subject: Re: Re: RE: [fluka-discuss]: How to set jagged geometries (fwd)
>
> Dear Yuan,
>
> Please always reply to the discussion list, do not write private emails.
>
> What I meant with my last email, is exactly what Anton and Paola had
> already written.
> Quoting Anton who quotes Paola:
> <<As Paola wrote to you about two weeks ago, 50 nm structures are probably
> too small for the physics models of the code. Let me quote: "the geometry
> you defined has layers as thin as 0.05 MICRONS. The models of the code
> cannot be used for such thin layers. A minimum size of about 1 micron
> should be kept to get meaningful results.">>
> To put it short: the dimensions of the objects you want to model are too
> small!
>
> For what concerns the use of PLA, you could have a look both at the manual
> and at the geometry lecture of FLUKA courses, this is the link to the last
> one:
> https://www.fluka.org/free_download/course/dresden2013/Lectures/05_Geometry_1013.pdf
>
> Nevertheless, once again, please, keep clearly in mind what Paola, Anton,
> and myself have said about the dimensions!
>
> Cheers,
>
> Roberto
>
>
>
> ---------- Forwarded message ----------
> Date: Fri, 25 Oct 2013 22:32:34 +0800 (CST)
> From: yyc2011_at_mail.ustc.edu.cn
> To: Roberto Versaci <roberto.versaci_at_gmail.com>
> Subject: Re: Re: RE: [fluka-discuss]: How to set jagged geometries (fwd)
>
> Dear Roberto,
>
> What is your meaning?You have not answered my question.What is your
> opinion?How to define the geometry?
>
> Best Wishes
> YuanChen
> > -----Original E-mail-----
> > From: "Roberto Versaci" <roberto.versaci_at_gmail.com>
> > Sent Time: 2013-10-25 21:01:24
> > To:"fluka-discuss_at_fluka.org" <fluka-discuss_at_fluka.org>
> > Cc:
> > Subject: Re: RE: [fluka-discuss]: How to set jagged geometries (fwd)
> >
> > Dear Yuan,
> >
> > Reading Anton's reply I realized I did not have noticed the dimensions of
> > your geometry. He is totally right in his comments about the dimensions!
> > They are definitely too small!
> >
> > Sorry,
> >
> > Roberto
> >
> >
> >
> >> Dear Yuan,
> >>
> >> You could consider using PLA bodies (generic planes) to define your
> >> triangles.
> >> Cheers,
> >>
> >> Roberto
> >>
> >>
> >>
> >> On Fri, 25 Oct 2013, yyc2011_at_mail.ustc.edu.cn wrote:
> >>
> >>> Dear Vasilis,
> >>>
> >>> Thanks for your reply.
> >>> The attachment is the schematic diagram.The geometry is like this.The
> >>> height of the triangle is 0.000005 centimeters.If I want to define this
> >>> geometry,how should I do?
> >>> Thanks for any suggestions.
> >>>
> >>> Best Regards
> >>> YuanChen
> >>>
> >>>
> >>>
> >>>
> >>>> -----Original E-mail-----
> >>>> From: "Vasilis Vlachoudis" <Vasilis.Vlachoudis_at_cern.ch>
> >>>> Sent Time: 2013-10-25 17:43:39
> >>>> To: "yyc2011_at_mail.ustc.edu.cn" <yyc2011_at_mail.ustc.edu.cn>,
> >>>>
> >>>> Cc:
> >>>> Subject: RE: [fluka-discuss]: How to set jagged geometries
> >>>>
> >>>> Hi Yuan,
> >>>>
> >>>> could you please be more explicit what you mean by jagged maybe a drawing
> >>>> will help.
> >>>> Please also give a look on the course lecture on geometry and especially on
> >>>> Geometry II
> >>>> for use of lattices or voxels.
> >>>> Vasilis
> >>>>
> >>>> ________________________________________
> >>>> From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on
> >>>> behalf of yyc2011_at_mail.ustc.edu.cn [yyc2011_at_mail.ustc.edu.cn]
> >>>> Sent: 25 October 2013 09:57
> >>>> To: fluka-discuss_at_fluka.org
> >>>> Subject: [fluka-discuss]: How to set jagged geometries
> >>>>
> >>>> Dear Fluka experts,
> >>>>
> >>>> I want to set jagged geometries in my simulation.But,I don't know how to
> >>>> set jagged geometries in the Fluka.Could you help me or could you give me
> >>>> any suggestions?
> >>>> Thanks for your time.Thanks for any suggestions.
> >>>>
> >>>> Best Regards
> >>>> YuanChen
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>
> >>
> >
> > --
> > Alberto Fass
> >
>
Received on Mon Nov 04 2013 - 05:18:24 CET