RE: [fluka-discuss]: linking with dpmjet

From: Joachim Vollaire <joachim.vollaire_at_cern.ch>
Date: Sun, 8 Dec 2013 21:11:34 +0000

Hi Andrew,

Once you have created the executable, you have to be sure you are using the newly created one (not the default flukahp). Also you need to activate ion transport and interaction using the IONTRANS card if you did not do so ?

Cheers
Joachim


From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of Andrew Taylor
Sent: 06 December 2013 18:24
To: fluka-discuss_at_fluka.org
Subject: [fluka-discuss]: linking with dpmjet

Dear Fluka people,

Although I've read that the routine
$FLUPRO/flutil/ldpmqmd

links to fluka with RQMD-2.4 and DPMJET-3,
I wanted to check with someone familiar with
using this that I was doing things correctly
(my results following doing this linking look
the same as without doing the linking).

Am I correct in presuming that simply
running the above mentioned routine before running
my fluka input file ensures the dpmjet routines
are linked?

Kind regards,
Andrew


--
------------------------------------------------------------
Dr. Andrew Taylor-Castillo
School of Cosmic Physics
Dublin Institute for Advanced Study
Ireland
office: +353 16621333x337
mob.: +353 877116296
Received on Sun Dec 08 2013 - 23:08:25 CET

This archive was generated by hypermail 2.3.0 : Sun Dec 08 2013 - 23:08:26 CET