Hi Tim
This is because it's not the original input from the course and you have introduced errors in the geometry... I suggest that you use the geometry editor in Flair and zoom out until you see also parts of BLKBODY. The geometry editor will then show you the error.
Cheers
Stefan
From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of Timotheus Cooijmans
Sent: 17 March 2014 15:18
To: fluka-discuss_at_fluka.org
Subject: [fluka-discuss]: Too many errors in geometry
Hi,
I'm working through the lecture slides and exercises of last October's FLUKA course (at
http://www.fluka.org/fluka.php?id=course&sub=program&navig=2&which=dresden2013 ) and got stuck at Exercise 8. FLUKA (2011.2b-linuxAA) keeps giving up after too many errors like the following:
> Geofar: Particle in region 2 (cell # 0) in position -1.203992411E+12 -4.012447545E+09 -1.924933464E+04
> is now causing trouble, requesting a step of 9.998519596E+04 cm
> to direction -9.785927409E-01 1.816700853E-03 2.057983166E-01, error count: 0
> R2: 1.203999097E+12 R3: 1.203999097E+12 cm
> X*U (2D): 1.178210944E+12 X*U (3D): 1.178210940E+12 cm
> X*UOLD(2D): 1.178210944E+12 X*UOLD(3D): 1.178210940E+12 cm
> Kloop: 109, Irsave: 2, Irsav2: 2, error code: -33 Nfrom: 4999
> old direction -9.785927409E-01 1.816700853E-03 2.057983166E-01, lagain, lstnew, lsense, lsnsct F F F F
> Particle index 3 total energy 9.864196244E-04 GeV Nsurf 4
> Try again to establish the current region moving the particle of a 9.664039024E+00 long step
> We succeeded in saving the particle: current region is n. 2 (cell # 0)
> Geofar: Particle in region 2 (cell # 0) in position -1.203992411E+12 -4.012447545E+09 -1.924734579E+04
> is now causing trouble, requesting a step of 9.998519596E+04 cm
> to direction -9.785927409E-01 1.816700853E-03 2.057983166E-01, error count: 1
> R2: 1.203999097E+12 R3: 1.203999097E+12 cm
> X*U (2D): 1.178210944E+12 X*U (3D): 1.178210940E+12 cm
> X*UOLD(2D): 1.178210944E+12 X*UOLD(3D): 1.178210940E+12 cm
> Kloop: 113, Irsave: 2, Irsav2: 2, error code: -33 Nfrom: 4999
> old direction -9.785927409E-01 1.816700853E-03 2.057983166E-01, lagain, lstnew, lsense, lsnsct F F F F
> Particle index 3 total energy 9.864196244E-04 GeV Nsurf 0
> Try again to establish the current region moving the particle of a 9.664039024E+00 long step
> [...]
> We succeeded in saving the particle: current region is n. 2 (cell # 0)
> Abort called from FLKAG1 reason TOO MANY ERRORS IN GEOMETRY Run stopped!
> STOP TOO MANY ERRORS IN GEOMETRY
The input file ex8.inp is attached. In an attempt to track down the problem, I distilled it down to ex8_debug.inp, which also exhibits the problem. My colleague -- otherwise a venerable master in the ways of FLUKA -- could not identify the cause either.
What am I doing wrong?
Thanks,
Tim
Received on Mon Mar 17 2014 - 17:29:14 CET