Re: [fluka-discuss]: beam
Hi Bruno
Not without user routines. Of course, with source.f your can specifiy for
each primary an energy and trigger from source.f scoring into certain
detectors, taking care yourself of the correct nomalization of the
results.
To some extend, running loops over input variables is facilitated by Flair
(still creating individual input files). Please have a look at the Flair
manual in the chapter explaining how to run FLUKA (see below) and see if
this could be of help.
Cheers
Stefan
Input shortcut description
----------- -------- ------------------------------------------
Add Ins Add a new simulation/input
Delete Del Delete the selected runs or spawned jobs
Clone Ctrl-D Clone/Duplicate the selected runs
Loop Loop on the selected runs.
Allows the user to create clones of runs by
looping on a user defined variable (#define)
over a range of values.
E.g. Imagine you want to run 9 simulations with
varying energy from 10 to 100MeV
Steps:
- define a variable in the input e.g.
#define E 0.01
- use the variable to the beam card
BEAM E: =-E
(The minus is necessary for fluka to
treat the function as energy. See
below
on Function Evaluation F3.6}
- Click on the loop button, select the
variable E and enter as:
Start value: 0.01
End value: 0.10
Step: 0.01
Click OK and 9 runs will be
automatically
generated.
You can loop on looped runs to create 2D scans.
etc.
___________________________________
Stefan Roesler
CERN, DGS-RP
CH-1211 Geneva 23
Switzerland
Phone: +41-22-7679891
Fax: +41-22-7669639
E-mail: Stefan.Roesler_at_cern.ch
On Fri, 9 May 2014, Bruno Alves Brenga Vieira wrote:
> Hi guys, Im tryng to run the input file with proton beam, but I JUST can do with one beam.. someone knows how i run with more than two beams?
> like beam proton 120, 160, 200, 260.
> and the usbin give me the dose of all beam..
>
> Bruno
>
>
Received on Sun May 11 2014 - 23:53:36 CEST
This archive was generated by hypermail 2.3.0
: Sun May 11 2014 - 23:53:37 CEST