RE: [fluka-discuss]: Fluka installation on lxplus (SLC6)

From: Vasilis Vlachoudis <Vasilis.Vlachoudis_at_cern.ch>
Date: Mon, 2 Jun 2014 14:08:20 +0000

Hi,

the "make install" tries to register as well the mime types. to avoid that please instead of
the "install" use "install-files"

Cheers
Vasilis
________________________________________
From: Mitja Majerle [majerle_at_ujf.cas.cz]
Sent: 02 June 2014 12:31
To: Vasilis Vlachoudis
Cc: fluka-discuss_at_fluka.org
Subject: Re: [fluka-discuss]: Fluka installation on lxplus (SLC6)

Dear Vasilis,

thank you for the help. I do this as user:
cd /tmp
wget http://www.fluka.org/flair/flair-2.0-2.tgz
wget http://www.fluka.org/flair/flair-geoviewer-2.0-2.tgz
tar -xzf flair-2.0-2.tgz
tar -xzf flair-geoviewer-2.0-2.tgz
cd flair-2.0
make
make install DESTDIR=/home/mitja/flair
(this error appears, but I guess it is not a big deal:
install -m 644 desktop/flair.desktop //usr/share/applications
install: cannot remove `//usr/share/applications/flair.desktop':
Permission denied
make: *** [install-mime] Error 1)


cd ..
cd flair-geoviewer-2.0
make
make install DESTDIR=/home/mitja/flair/

I try to run from terminal, no error messages. In FLAIR I get
"Warnings during loading, open OUTPUT..."
In output:
Started...
Warning: Geometry Viewer not found

Error: No module named geoviewer

geoviewer.so and fonts/ are in their places, this is ls output in
/home/mitja/flair:
AUTHORS.geoviewer BUGS.geoviewer flair geoviewer.so
bin ChangeLog.geoviewer fonts README.geoviewer

Attaching screenshots..

Mitja

On 5/30/2014 9:04 AM, Vasilis Vlachoudis wrote:
> Hi Angela,
>
> could you verify that in the flair installation directory there are the files:
> geoviewer.so
> fonts/*
>
> If not then you missed the "make install DESTDIR=/.." for the geoviewer
>
> Otherwise please run flair from a terminal and see what error messages
> are displayed there. That will provide us more hints on what went wrong.
>
> Vasilis
>
> ________________________________________
> From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of Mitja Majerle [majerle_at_ujf.cas.cz]
> Sent: 28 May 2014 11:43
> To: Angela Benelli
> Cc: Vittorio Boccone; fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: Fluka installation on lxplus (SLC6)
>
> Hello,
>
> I would like to insert a remark about FLAIR here.
> I also use SLC65, 32bit version of fluka (some extra i686 libraries are
> needed to compile with g77).
> I install FLAIR as non-root with make install DESTDIR=/..
> Both FLAIR and FLAIR-GEOVIEWER compiled and installed to the DESTDIR,
> but FLAIR won't run with geoviewer (it prints error at start and
> geoviewer is disabled), it seems it expects it in default installation
> directory.
> Maybe somebody can fix this ?
>
> M
>
> On 5/28/2014 9:02 AM, Angela Benelli wrote:
>> Ciao Vittorio, grazie !
>>
>> would this also allow me to use Flair ?
>>
>> thank you Angela
>> ------------------------------------------------------------------------
>> *From:* Dr. Vittorio Boccone [dr.vittorio.boccone_at_ieee.org]
>> *Sent:* 27 May 2014 21:31
>> *To:* Angela Benelli; fluka-discuss_at_fluka.org
>> *Subject:* Re: [fluka-discuss]: Fluka installation on lxplus (SLC6)
>>
>> Ciao Angela,
>> in principle you can build both the 64 and the 32 bit versions.
>>
>> You can build the standard 32 bit version with g77 (f
>> <https://www.fluka.org/packages/fluka2011.2b-linuxAA.tar.gz>luka2011.2b-linuxAA.tar.g
>> <https://www.fluka.org/packages/fluka2011.2b-linuxAA.tar.gz>z
>> <https://www.fluka.org/packages/fluka2011.2b-linuxAA.tar.gz>) just by by
>> following the instruction in the README (define just FLUPRO). Just be
>> sure to have enough space there....
>>
>> You can also use the 64bit gfortran version
>> (fluka2011.2b-linux-gfor64bitAA.tar.gz
>> <https://www.fluka.org/packages/fluka2011.2b-linux-gfor64bitAA.tar.gz>),
>> but for that you need to use the scl
>> (http://linux.web.cern.ch/linux/devtoolset/) which can easily be enabled
>> on the lxplus shell by doing a
>>
>> > scl enable devtoolset-2 bash
>>
>> Dot' forget to define the environment variables *"FLUFOR=gfortran"*and
>> *"GFORFLU=$(which gfrtran)"*which will tell FLUKA (once more) which
>> gfortran to use.
>>
>> Cheers
>>
>> V&co.
>>
>>
>>
>>
>>
>> On 5/27/14 4:37 PM, Angela Benelli wrote:
>>>
>>> hello,
>>> could you please advice me which version should i install on the
>>> lxplus (SLC6) ? any particular instruction to follow or should i use the
>>> chapter 3 of the online manual ?
>>> Comment Date Size
>>> flupix-2011.2b-6_flair-2.0-1.iso
>>> <https://www.fluka.org/packages/flupix-2011.2b-6_flair-2.0-1.iso>
>>> FLUKA Package Version 2011.2b.1 30th of April, 2014 378 MB
>>> fluka2011.2b-linuxAA.tar.gz
>>> <https://www.fluka.org/packages/fluka2011.2b-linuxAA.tar.gz> FLUKA
>>> Package Version 2011.2b.6 8th of April, 2014 142 MB
>>> fluka-2011.2b-6.i686.rpm
>>> <https://www.fluka.org/packages/fluka-2011.2b-6.i686.rpm> rpm for
>>> fluka-2011.2b-6 21st of April, 2014 140 MB
>>> fluka2011.2b-linux-gfor64bitAA.tar.gz
>>> <https://www.fluka.org/packages/fluka2011.2b-linux-gfor64bitAA.tar.gz> FLUKA
>>> GFortran, 64 bits, Package Version 2011.2b.6 8th of April, 2014 154 MB
>>> fluka-2011.2b-6.x86_64.rpm
>>> <https://www.fluka.org/packages/fluka-2011.2b-6.x86_64.rpm> rpm for
>>> fluka-2011.2b-6 8th of April, 2014 144 MB
>>>
>>>
>>> thank you very much Angela Benelli
>>
>
Received on Mon Jun 02 2014 - 17:41:24 CEST

This archive was generated by hypermail 2.3.0 : Mon Jun 02 2014 - 17:41:25 CEST