RE: [fluka-discuss]: Dose-equivalence and Dose-rate

From: Vasilis Vlachoudis <Vasilis.Vlachoudis_at_cern.ch>
Date: Fri, 17 Apr 2015 07:19:55 +0000

FLUKA can calculate both in a single run
1. prompt: during the beam is on
2. decay: after an irradiation and a certain cooling time

if you need the prompt you only need your beam intensity as primaries per unit of time.
if you need the delayed you have to activate the decay run with the RADDECAY
define an irradiation profile IRRPROFI, set come cooling times DCYTIMES and
couple the scoring cards (e.g. USRBIN) with a specific decay with DCYSCORE
for more information look in the activation lecture of our beginners course

V.
________________________________
From: NKANYISO ROBERT Mantengu [3477531_at_myuwc.ac.za]
Sent: 16 April 2015 14:49
To: Vasilis Vlachoudis
Cc: fluka-discuss_at_fluka.org
Subject: Re: [fluka-discuss]: Dose-equivalence and Dose-rate

Hi Vasilis,

I don't know if I've got you correctly, do you mean say that I have to use RADDECAY, IRRPROFI, DCYTIMES cards so that I will be able to declare the beam intensity as well as cooling times?

Regards,
N.R Mantengu

On Thu, Apr 16, 2015 at 2:35 PM, Vasilis Vlachoudis <Vasilis.Vlachoudis_at_cern.ch<mailto:Vasilis.Vlachoudis_at_cern.ch>> wrote:
Hi,

on the prompt run as you are performing FLUKA will output from your USRBIN
pSv/primary
which is a simple conversion to Sv/(unit time) = pSv/primary / 1e12 (pSv->Sv) * I
where I your beam intensity protons/second

regards
Vasilis

________________________________
From: owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it> [owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it>] on behalf of NKANYISO ROBERT Mantengu [3477531_at_myuwc.ac.za<mailto:3477531_at_myuwc.ac.za>]
Sent: 15 April 2015 17:50
To: fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org>
Subject: [fluka-discuss]: Dose-equivalence and Dose-rate

Dear FLUKA users,

I'm trying to score the dose rate to see that how many Sv/(unit time), but my data that I get out of the run doesn't give me that information.

Any help will be appreciated.

NB: I have also attached the input file.

Regards,
N.R Mantengu.



__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Apr 17 2015 - 10:47:13 CEST

This archive was generated by hypermail 2.3.0 : Fri Apr 17 2015 - 10:47:23 CEST