Re: [fluka-discuss]: Core dump (subscript out of range)

From: Vittorio Boccone <dr.vittorio.boccone_at_ieee.org>
Date: Fri, 25 Sep 2015 19:00:19 +0200

Dear Vadim, without input file (and all the relevant SRC files) it's
impossible to debug your problem and reproduce the anomalous termination of
your simulation.
Best. Vittorio
Dear FLUKA Experts,

Recently an attempt to run one of the FLUKA inputs with the
fluka2011.2c-linux-gfor64bit distribution resulted in the segmentation
fault and the core dump, with the following first lines in the .log file:

Program received signal SIGSEGV: Segmentation fault - invalid memory
reference.

Backtrace for this error:
#0 0x7FC051B7BA17
#1 0x7FC051B7C01E
#2 0x35AE43269F
#3 0x35AE4838A0
#4 0x7DCE82 in copytx_
#5 0x5FA9FE in rpnrul_
#6 0x5F90D7 in rpnorm_
#7 0x5E9EE7 in flkcgi_
#8 0x4E78CF in geoinp_
#9 0x408E8B in flukam_

Next attempt to run the same input from FLAIR in
flupix-2011.2c-0_flair-2.1-5 resulted in the TIMED-OUT status with the
first lines in the .log file:

Subscript out of range on file line 84, procedure rpnorm.f/rpnorm.
Attempt to access the 100001-th element of variable tx.

Two logs are attached. One could suspect that the cause is related to the
geometry definition, however the geometry was checked in the FLAIR geometry
viewer and no obvious errors were found.

Any hints and ideas are welcome,

Cheers,
Vadim


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Sep 25 2015 - 20:19:28 CEST

This archive was generated by hypermail 2.3.0 : Fri Sep 25 2015 - 20:19:32 CEST