[fluka-discuss]: error in plotting

From: Masoomeh Yarmohammadi <myarmohammadi_at_ipm.ir>
Date: Sun, 18 Oct 2015 17:17:56 +0330 (IRST)

Dear All,

In the following of my previous question about 10MeV electron linac.

For plotting, It plots, then an error messange box pops up with the following text.Could you help mw about the source of this error even though the plot is created.

the inp and flair file is attached to the previous question in this community.

regards,
Masoomeh
 

Started 2015.10.17 19:40:27
set terminal qt 0 enhanced raise title 'Simple-Ph1-COPPER-V2-w-shi-1-with photonuc.flair-0: USRBIN Simple-Ph1-COPPER-V2-w-shi-1-with photonuc 24'

set key default
Cmd: /usr/local/flukagfor/flutil/gplevbin <<EOF
-

Simple-Ph1-COPPER-V2-w-shi-1-with photonuc_24.bnn

1

240

1

400

EOF

Cmd: /usr/local/flukagfor/flutil/rfluka -M 1 flairiG5KkS
$TARGET_MACHINE = Linux
$FLUPRO = /usr/local/flukagfor

Initial seed copied from /usr/local/flukagfor
Running fluka in /home/myar/shielding/LinacIPM/Phase1-CopperTarget1/Simple format of shield/With photonuc/fluka_5717

======================= Running FLUKA for cycle # 1 =======================

Removing links
Removing temporary files
Saving output and random number seed
     No ranflairiG5KkS002 generated!
     No flairiG5KkS001.err generated!
Saving additional files generated
     Moving PLOTGEOM.STORE to /home/myar/shielding/LinacIPM/Phase1-CopperTarget1/Simple format of shield/With photonuc/flairiG5KkS001_PLOTGEOM.STORE
End of FLUKA run
... Fluka run: 0.414355 s
Processing PLOTGEOM.STORE file
... Worms: 0.0173311 s
... Histogram: 9.91821e-05 s
... Labels: 0.000722885 s
set style line 1 lt -1 lw 1
set colorbox vertical
set pm3d map explicit corners2color c1
set palette defined ( 1. 1.0 1.0 1.0, 2. 0.9 0.6 0.9, 3. 1.0 0.4 1.0, 4. 0.9 0.0 1.0, 5. 0.7 0.0 1.0, 6. 0.5 0.0 0.8, 7. 0.0 0.0 0.8, 8. 0.0 0.0 1.0, 9. 0.0 0.6 1.0,10. 0.0 0.8 1.0, 11. 0.0 0.7 0.5, 12. 0.0 0.9 0.2,13. 0.5 1.0 0.0, 14. 0.8 1.0 0.0, 15. 1.0 1.0 0.0,16. 1.0 0.8 0.0, 17. 1.0 0.5 0.0, 18. 1.0 0.0 0.0,19. 0.8 0.0 0.0, 20. 0.6 0.0 0.0, 21. 0.0 0.0 0.0 )
set palette maxcolors 30
set logscale cb
set logscale z
plot 'Simple-Ph1-COPPER-V2-w-shi-1-with photonuc_24_plot.dat' us 1:2:3 with image notitle ,'Simple-Ph1-COPPER-V2-w-shi-1-with photonuc_24_plot.geo.dat' ind 0 us 5:3:(1E99) w l ls 1 notit
<e< Reading ras files from sequential devices not supported

<e< Reading ras files from sequential devices not supported

Gnuplot error



__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Sun Oct 18 2015 - 17:11:09 CEST

This archive was generated by hypermail 2.3.0 : Sun Oct 18 2015 - 17:11:10 CEST