Dear FLUKA users
I want to simulate a simple isotropic neutron volume source with a given
specific spectrum, averaged over the whole source. For the spectrum reading I
use a separate file with the corresponding energy data [ MeV ] and the
corresponding neutron flux [ n/(cm2*s) ]. And my goal is to measure the
resulting flux and dose outside the geometry.
I´m not very familiar with programming so I oriented myself on the exercise8
from the 8th FLUKA course in Greece. I tried to modify the source.f user
routine, to read the spectrum from the external file. But during the runs FLUKA
does not generate any output and I have no idea where the problems are ...?!
I just want to read from an external file my individual neutron spectrum.
The remaining BEAM details should correspond to the BEAM-card and the
BEAMPOS-cards from the input.
What commands are exactly needed? Or does a basic version of source.f exist to
do that?
Could you help me further, please?
Friendly regards
Uwe
***************************************************
Riesterer Uwe
Furtwangen University of Applied Sciences
Security & Safety Engineering
***************************************************
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Wed May 18 2016 - 14:51:28 CEST