Re: Re: [fluka-discuss]: Problems of the New version flupix-2011.2c-4_flair-2.2-1

From: YANG Tao <yangt_at_ihep.ac.cn>
Date: Wed, 29 Jun 2016 10:55:36 +0800 (GMT+08:00)

Dear Stefan,
Thanks a lot. I think it may be related to the flupix or the flair in flupix.

Best Regards,
Tao Yang


> -----原始邮件-----
> 发件人: "Stefan Roesler" <sroesler_at_mail.cern.ch>
> 发送时间: 2016年6月28日 星期二
> 收件人: "YANG Tao" <yangt_at_ihep.ac.cn>
> 抄送: fluka-discuss_at_fluka.org
> 主题: Re: [fluka-discuss]: Problems of the New version flupix-2011.2c-4_flair-2.2-1
>
> Dear Tao Yang
>
> I have run your inputs on a Laptop running Linux (and not via flupix) and
> get
> 1. the expected BEAMPART fluence
> 2. a color fluence plot resembling the cascade evolution.
>
> Thus, your observations could be related to you installation.
>
> Cheers
> Stefan
>
>
> On Wed, 22 Jun 2016, YANG Tao wrote:
>
> >
> > Hello, everyone!
> >
> > Recently, I find there are some problems of the new
> > version  flupix-2011.2c-4_flair-2.2-1. I don't know whether you have the
> > problems or not.
> >
> > 1. The 1 MeV gamma rays were directed  towards a simple cuboid lead block.
> >  USRBDX score card has been used to obtain the transmission values, I/I0,
> > where I0 and I are the incident and attenuated photon intensities.
> > Theoretically, I0 is  1 photon/primary since the incident photon will all
> > penetrate the front surface of the lead block, however,  the result (31BIN,
> > "rushe") always give ZERO result, it's confusing, where did the photons go?
> > and I get the correct result running on the server workstation. The input
> > file is gamm.inp
> >
> > 2. The USBIN results could plot a colorful picture in the old version of
> > flupix as shown in figure1, however, the picture can only show the pink
> > color shown in figure2 for the same merging files. The input file is blm.inp
> >   
> >
> > Could someone help me in these questions please?
> >  
> > Thank you.
> >  
> > With the best regards,
> >  
> >
> > Tao Yang
> >
> > CAS
> >
> >
> >


--
杨涛
中科院高能所东莞分部(东莞中子科学中心)加速器技术部      
地址:东莞市大朗镇中子源路1号中国散裂中子源A2栋606室
E-mail:yangt_at_ihep.ac.cn
电话:0769-38944239
邮编:523803
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?idc_info
Received on Wed Jun 29 2016 - 06:50:59 CEST

This archive was generated by hypermail 2.3.0 : Wed Jun 29 2016 - 06:51:01 CEST