CERN homepage INFN homepage
FLUKA: 8.8} GEOEND card Previous Index Next

8.8} GEOEND card


 A card with the string GEOEND in column 1-6 must terminate the
 combinatorial geometry input.

                           Geometry debugger
                           -----------------

 The GEOEND card can be used also to activate the geometry debugger,
 using the WHAT and 
SDUM
parameters. In this case, a second GEOEND card (continuation) may be necessary. It is recommended that a STOP card should follow immediately, avoiding to start transport when debugging is completed. 1st GEOEND card:
WHAT(1)
= X_max of the geometry region to be debugged (no default)
WHAT(2)
= Y_max of the geometry region to be debugged (no default)
WHAT(3)
= Z_max of the geometry region to be debugged (no default)
WHAT(4)
= X_min of the geometry region to be debugged (no default)
WHAT(5)
= Y_min of the geometry region to be debugged (no default)
WHAT(6)
= Z_min of the geometry region to be debugged (no default)
SDUM
: must be = DEBUG to activate the debugger 2nd (optional) GEOEND card:
WHAT(1)
= Number of steps in the x-direction between X_min and X_max (default: 20)
WHAT(2)
= Number of steps in the y-direction between Y_min and Y_max (default: 20)
WHAT(3)
= Number of steps in the z-direction between Z_min and Z_max (default: 20) WHAT(4,5,6) : not used
SDUM
= & in any position in column 71 to 78 See the Notes to GEOEND option for more details and instructions.

Previous Index Next