Re: Fw: fluka

From: John Clem (clem@mail2.bartol.udel.edu)
Date: Wed Oct 29 2003 - 22:03:21 CET

  • Next message: Giuseppe Battistoni: "(no subject)"

    Actually there is transport in the vacuum initially, however taking your
    idea further by placing an intermediate thin low density region between
    air-vacuum boundary would probably work...

    Thanks,
    John

    On Wed, 29 Oct 2003, Alberto Fasso' wrote:

    > Hi John,
    >
    > if there is no transport at all in vacuum, you can just replace it by
    > any dummy material you wish, and do the reflection at the surface
    > boundary air-dummy_material.
    > It sounds funny, but you can use even lead for this purpose.
    > But maybe you could find less shocking to define a thin layer of
    > air with a different material name.
    >
    > Alberto
    >
    >
    > On Wed, 29 Oct 2003, John Clem wrote:
    >
    > >
    > > Hi Alberto,
    > >
    > > Thanks... Yes, I'm very familiar with USRMED from past work. I didn't
    > > realize it could be used in that way. One particular problem I'm
    > > interested in requires a 180 reflection at an air-vacuum boundary i.e.
    > > track departing an air region into a vacuum region is reflected back
    > > into the air region. In this case, it's not clear if the rotation
    > > occurs in air or the vacuum.
    > >
    > > John
    > >
    > >
    > >
    > > On Wed, 29 Oct 2003, Alberto Fasso' wrote:
    > >
    > > > I am not sure about MGDRAW, but I think it could be dangerous.
    > > > The proper way to modify the directional cosines of a particle
    > > > is by means of another user routine, USRMED (see details in
    > > > Chap. 19 of the Manual). It is activated by option MAT-PROP with
    > > > SDUM = USERDIRE. It can be used, for instance, to
    > > > implement some sort of albedo reflection at the surface of
    > > > a given medium. However, it cannot be used in vacuum.
    > > >
    > > > Sorry if this does not answer your question directly.
    > > >
    > > > Alberto
    > > >
    > > > On Fri, 24 Oct 2003, John Clem wrote:
    > > >
    > > > > Does anyone know the answer to this ?? Obviously, this can be tested, but
    > > > > there may be some subtle effects.
    > > > >
    > > > > Thanks,
    > > > > John
    > > > >
    > > > > ----- Original Message -----
    > > > > From: John Clem
    > > > > To: Alfredo.Ferrari@cern.ch
    > > > > Sent: Thursday, October 23, 2003 9:06 AM
    > > > > Subject: fluka
    > > > >
    > > > >
    > > > >
    > > > > Alfredo,
    > > > >
    > > > > Can the directional cosines of a particle trajectory be modified in MGDRAW ??
    > > > >
    > > > > Thanks,
    > > > > John
    > > > >
    > > > >
    > > > > >>
    > > > > >>John Clem
    > > > > >>Senior Scientist
    > > > > >>217 Sharp Lab
    > > > > >>Bartol Research Institute
    > > > > >>University of Delaware
    > > > > >>Newark, DE 19716 USA
    > > > > >>Tel 302-831-4354
    > > > > >>Fax 302-831-1843
    > > > > >>clem@bartol.udel.edu
    > > > > >>
    > > > >
    > > >
    > > > --
    > > > Alberto FassÚ
    > > > SLAC-RP, P.O. Box 4349, MS 48, Stanford CA 94309
    > > > Phone: (1 650) 926 4762 Fax: (1 650) 926 3569
    > > > fasso@slac.stanford.edu
    > > >
    > >
    > >
    >
    > --
    > Alberto FassÚ
    > SLAC-RP, P.O. Box 4349, MS 48, Stanford CA 94309
    > Phone: (1 650) 926 4762 Fax: (1 650) 926 3569
    > fasso@slac.stanford.edu
    >


  • Next message: Giuseppe Battistoni: "(no subject)"

    This archive was generated by hypermail 2.1.6 : Wed Oct 29 2003 - 23:34:07 CET