From: Alberto Fasso' (fasso@SLAC.Stanford.EDU)
Date: Mon Sep 12 2005 - 16:57:36 CEST
Oxygen's identifiers are 8 +16 293, not 8.0 -2.0 293.
There may be other erros of the same type, I haven't checked.
But why do you use LOW-MAT? The default materials are those you want,
and using LOW-MAT when it is not necessary is a frequent source of mistakes
of this kind.
There is a double warning in the manual, but users seem to love that
command. The purpose of LOW-MAT is to override the defaults in the
(rare) cases when they are not acceptable.
Alberto
On Sun, 11 Sep 2005, Reddell, Brandon D wrote:
>
> Dear FLUKA users,
>
> I am getting the following familiar error message that has been posted before:
>
> **** Low energy neutron xsec not found for some media 3 5 ****
>
> However, I can not determine what the problem is. Below are my material and assignment statements. Could somebody tell me what I am doing wrong?
>
> Sincerely,
>
> Brandon Reddell
>
> *23456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789
> *MATERIAL 13.0 27.000 2.70 10.0 ALUMINUM
> *LOW-MAT 13.0 13.0 -2.0 293.0
> *MATERIAL 14.0 28.100 2.329 13.0 SILICON
> *
> *23456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789
> MATERIAL 7.0 14.067 0.001251 7.0 NITROGEN
> LOW-MAT 7.0 7.0 -2.0 293. NITROGEN
> MATERIAL 8.0 15.999 0.001429 8.0 OXYGEN
> LOW-MAT 8.0 8.0 -2.0 293. OXYGEN
> MATERIAL 1.0 1.0079 8.988E-5 3.0 HYDROGEN
> LOW-MAT 3.0 3.0 -2.0 293.0 HYDROGEN
> * Argon material n. 18, normal temperature, overrides default mat. 18
> MATERIAL 18.0 39.948 1.400 18.0 ARGON
> LOW-MAT 18.0 18.0 -2.0 293.0 ARGON
> * Air (mat. 24): 3 components, N (mat. 7), O (mat. 8), gaseous Ar (mat. 18)
> MATERIAL 0.001225 26.0 AIR
> COMPOUND -.9256E-03 7.0 -.2837E-03 8.0 -.01572E-3 18.0 AIR
> * Water (mat. 20): H (material 3) and O (material 8)
> MATERIAL 1.00 27.0 WATER
> COMPOUND 2.0 3.0 1.0 8.0 WATER
> *23456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789
> * Aluminum
> ASSIGNMAT 10.0 3.0
> * External Black Hole
> ASSIGNMAT 1.0 1.0
> * Vacuum
> ASSIGNMAT 2.0 2.0
> * Air
> ASSIGNMAT 26.0 4.0
> * Water
> ASSIGNMAT 27.0 5.0
> ASSIGNMAT 27.0 6.0
> LOW-NEUT 0.0
> EMF EMF-OFF
> *23456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789
>
>
>
-- Alberto Fassň SLAC-RP, MS 48, 2575 Sand Hill Road, Menlo Park CA 94025 Phone: (1 650) 926 4762 Fax: (1 650) 926 3569 fasso@slac.stanford.edu
This archive was generated by hypermail 2.1.6 : Mon Sep 12 2005 - 17:24:24 CEST