From: fanoos (firstname.lastname@example.org)
Date: Fri Dec 01 2006 - 16:56:39 CET
Dear FLUKA users
I am a beginner to use fluka code.I could run the fluka example.inp successfully.It took about 5 minutes for each cycle to be complete.Then I removed the BEAMPOS card and added a SOURCE card to example.inp to test how a input file which contain SOURCE card is run.Also I added the following lines to fluka source routine in usermvax.
PMOFLK (NPFLKA) = 20.0
and for particle coordinates
XFLK (NPFLKA) = 0.0
YFLK (NPFLKA) = 0.0
ZFLK (NPFLKA) = -50.0
to compile and link to source.f I wrote:
$FLUPRO/flutil/lfluka -m fluka source.f -o myfluka
After that myfluka as a excecutable file was created
to run the example.inp
$FLUPRO/flutil/rfluka -e myfluka -N0 -M3 example &
But after about 2 hours I did not get any result and running remained in first cycle.
I do not know what the problem is.
How much dose it take to run a *.inp which contain the SOURCE card?
Haw can I know compiling and linking to source.f have been done correctly?
please guide me.
Access over 1 million songs - Yahoo! Music Unlimited.
This archive was generated by hypermail 2.1.6 : Tue Dec 05 2006 - 17:05:03 CET