Hi,
I'm using:
FLUKA2011 Version 2c.3 Dec-15 by A. Ferrari DATE: 5/ 4/17 TIME:
9:48:30
and I can see in tank001.out:
**** This version is obsolete and/or ****
**** you are not allowed to use FLUKA ****
**** Please contact the FLUKA list ****
**** or look for an updated version ****
**** at
http://www.fluka.org
It was working stable so we didn't instal new FLUKA 2011.2c.5
Do you think 2c.3 might have stopped a few days ago?
I attached the tank001.out, thanks for help!
Agnieszka
W dniu 2017-05-04 14:23, Eleftherios Skordis napisał(a):
> Hi Amucha,
>
> On first glance, it appears that there is nothing wrong with your
> input. Please check in the file tank001.out
> It is possible you have an outdated fluka version. If it's not the
> case could you please also send that.
>
> Kind regards
>
> Lefteris
>
> -----------------------
>
> Eleftherios Skordis
> Dep. EN/STI, CERN
> CH-1211 GENEVA 23
> SWITZERLAND
>
> OFFICE: +41-22-7679541
>
> ________________________________________
> From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it]
> on behalf of amucha_at_agh.edu.pl [amucha_at_agh.edu.pl]
> Sent: 04 May 2017 10:09
> To: fluka-discuss_at_fluka.org
> Subject: [fluka-discuss]: run stop due to a seed problem
>
> Dear Fluka Users,
> I came across an unpleasant problem which origin is unknown for me. I
> run an input (attached to this post, Flair, 5 cycles) and got a message
> TIME OUT. In the output file I can see:
>
> Initial seed copied from /home/software/fluka
> Running fluka in
> /data1/FLUKA/fluka_share/AMUCHA/OPJM/04_15/BIN_TEST/fluka_40333
>
> ======================= Running FLUKA for cycle # 1
> =======================
>
> Removing links
> Removing temporary files
> Saving output and random number seed
> No rantank002 generated!
> No tank001.err generated!
> Saving additional files generated
> No additional files to move
> ERROR: Random seed
> '/data1/FLUKA/fluka_share/AMUCHA/OPJM/04_15/BIN_TEST/rantank002' do not
> exist!
>
> This input was ok a couple days ago, initial seed was found, the second
> cycle started normally. Where should I look for solution?
>
> Regards,
> Agnieszka Mucha
>
> __________________________________________________________________________
> You can manage unsubscription from this mailing list at
> https://www.fluka.org/fluka.php?id¬c_info
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Thu May 04 2017 - 15:45:25 CEST