From: Stefan Roesler <Stefan.Roesler_at_cern.ch>
Date: Sat, 24 Jun 2017 12:40:32 +0000
Dear colleague
GRAPHITE is not among the names of one of the low energy neutron cross section data-sets (see list in Manual Ch. 10.4.1.2). Thus, you have to assign one of the cross section data sets in this list (Graphite bound nat. Carbon) to your material GRAPHITE with a LOW-MAT card. In fact, the example given in the manual for the LOW-MAT card shows how to do this for graphite..
Cheers
Stefan
________________________________
From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of ÷־Զ [meizhiyuan_at_hust.edu.cn]
Sent: 23 June 2017 04:05
To: fluka discuss
Subject: [fluka-discuss]: group limits start error, for help!!!
Hello FLUKA experts
I am getting some difficulty to run the input file.
There is 5 cycle has to be run but after 1 cycle is showing finished and I am getting some error message as the picture below.
[cid:611b7e$2$15cd2b27c26$Coremail$meizhiyuan$hust.edu.cn]
And the project out file is showed as the picture below.[cid:3c851f6a$1$15cd2b27c27$Coremail$meizhiyuan$hust.edu.cn]
I cant't understand what mistakes has been made and I need your help!
The attachment is the Flair input file.
Thank you very much for your kindly help!
--
Name: Zhiyuan Mei
Add.: HUST(Huazhong University of Science and
Technology) in Wuhan, China
PHONE: +86 155-2701-7168
Email: meizhiyuan_at_hust.edu.cn<mailto:meizhiyuan_at_hust.edu.cn>
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Sat Jun 24 2017 - 17:10:58 CEST
