Hello,
Thanks a lot to the both of you for your answer.
It seems to be working now,
Cheers,
Francesca
Il 26 lug 2017 10:31 AM, "Francesco Cerutti" <Francesco.Cerutti_at_cern.ch> ha
scritto:
>
> Dear Francesca,
>
> your DETECT scoring is ill-defined:
>
> i. the trigger region should go on the same card with the detector region,
> and not on a new one. To do so, you need a continuation card, that in Flair
> can be displayed by asking for 6 regions instead of 1.
>
> ii. the max energy has no default, as the manual points out, and you must
> input a value larger than zero. This was the cause of your crash.
>
> Note that with DETECT you will get an unformatted output on unit 17. You
> may want to consider the suitability of EVENTBIN for your purposes
>
> Best wishes
>
> Francesco
>
> **************************************************
> Francesco Cerutti
> CERN-EN/STI
> CH-1211 Geneva 23
> Switzerland
> tel. ++41 22 7678962
> fax ++41 22 7668854
>
> On Tue, 25 Jul 2017, francesca falorsi wrote:
>
>
>> Dear Fluka's experts,
>>
>> I've got a problem with the DETECT card.
>>
>> Every time I try to run the simulation fluka simulates 1000 events on 5000
>> and then it goes TIMED OUT. Do you know what the problem could be?
>> Attached
>> you can find the input file.
>>
>> Thank you for your attention,
>>
>> Cheers,
>>
>> Francesca
>>
>>
>>
>>
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Wed Jul 26 2017 - 15:08:21 CEST