RE: [fluka-discuss]: low energy neutron xsec not found for Rhodium

From: Eleftherios Skordis <eleftherios.skordis_at_cern.ch>
Date: Tue, 22 May 2018 16:02:06 +0000

Dear Yao

unfortunately if the material is not available in FLUKA there is no clear solution.
The best approach would be to use the LOW-MAT of a material that exists in FLUKA and has a similar cross-section of interest (for your studies) with RHODIUM.

Hope this helps

regards

Lefteris

-----------------------

Eleftherios Skordis
Dep. EN/STI, CERN
CH-1211 GENEVA 23
SWITZERLAND

OFFICE: +41-22-7679541<tel:%2B41-22-7675461>
________________________________
From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of yaoyang [yangyao15_at_mails.ucas.ac.cn]
Sent: 22 May 2018 14:39
To: fluka-discuss_at_fluka.org
Subject: [fluka-discuss]: low energy neutron xsec not found for Rhodium


Hello fluka users,

I am trying to define a detector composed of Rhodium to detect the neutrons, but the "Low energy neutron xsec not found for some media 5 6 *** RHODIUM" shows in the output file. I know that the LOW-MAT card can be used sometimes to solve this problem, but in this condition there is no corresponding low-energy neutron material find for Rhodium in the LOW-MAT. So how can I solve this problem? Any suggeations or comments will be appreciated. Thank you very much in advance.

Best regards.

Yao Yang


__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Tue May 22 2018 - 19:24:35 CEST

This archive was generated by hypermail 2.3.0 : Tue May 22 2018 - 19:24:42 CEST