Dear Andrew,
I hope you don't mind, but I'm sending this email to the FLUKA mailing list as well. The answers could be interesting to others as well.
1.) The error caused by the "<" and ">" characters, they only indicate the location. The .linux files for Flukacad should be in your /docker_work folder, because you want to run them from the docker container.
2.) To use the 3D function of flair, check out this tutorial video:
https://www.youtube.com/watch?v=IZWE_qTbQII (It was created with an old version of flair, but it should work the same.)
Kind regards,
Dávid Horváth
Junior Researcher
Radiation Protection
ELI Beamlines
E: david.horvath_at_eli-beams.eu
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břeľany, Czech Republic
________________________________________
From: Andrew Hastings <ahasti4_at_lsu.edu>
Sent: 22 August 2018 17:12:46
To: Horváth Dávid
Subject: RE: [fluka-discuss]: Flukacad & Pipsicad in Docker
Dávid Horváth,
I'm terribly sorry to bother you with this, since you've helped me so much already. I have 2 questions today.
1. I've edited ./common/flair.dockerfile and included the 3 packages as you suggested. I believe I've done so incorrectly however, since it runs into some error that I don't have time to read before it closes. Additionally, I'm not sure which directory the .linux files I downloaded (Pipsicad_int & Flukacad_int). I figured it was either F4D-master or in the F4D-master/common.
I've attached my edited document in the hope that you can point out my mistake.
2. I checked the Flair help guide section F4.13, and tried generating a 3D image of the example.inp provided with F4D. I'm still only seeing the 4-window 2D views. I was hoping to generate a 3D image of the Beryllium block to test out the process. Any suggestions on getting the imager to work?
Andrew D. Hastings
Medical Physics and Health Physics Graduate Student (MS)
College of Engineering SI Coordinator
Louisiana State University
(225)333-8435|ahasti4_at_lsu.edu
-----Original Message-----
From: Horváth Dávid <David.Horvath_at_eli-beams.eu>
Sent: Wednesday, August 15, 2018 10:39 AM
To: Andrew Hastings <ahasti4_at_lsu.edu>
Subject: Re: [fluka-discuss]: Flukacad & Pipsicad in Docker
Hi Andrew,
if you are only looking for making 3D images, and not creating cad readable files. I would suggest to use the 3D plotting capabilities of flair's geoviewer. See flair's manual (F1 in flair) section F4.13.
Cheers,
Dávid Horváth
Junior Researcher
Radiation Protection
ELI Beamlines
E: david.horvath_at_eli-beams.eu
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břeľany, Czech Republic
________________________________________
From: Andrew Hastings <ahasti4_at_lsu.edu>
Sent: 15 August 2018 17:25:48
To: Horváth Dávid
Subject: RE: [fluka-discuss]: Flukacad & Pipsicad in Docker
Thank you so much! I'm looking forward to generating 3D images.
Andrew D. Hastings
Medical Physics and Health Physics Graduate Student (MS) College of Engineering SI Coordinator Louisiana State University (225)333-8435|ahasti4_at_lsu.edu
-----Original Message-----
From: Horváth Dávid <David.Horvath_at_eli-beams.eu>
Sent: Wednesday, August 15, 2018 10:24 AM
To: Andrew Hastings <ahasti4_at_lsu.edu>; Andrea Fontana <andrea.fontana_at_pv.infn.it>; fluka-discuss_at_fluka.org
Subject: Re: [fluka-discuss]: Flukacad & Pipsicad in Docker
Hi Andrew,
the following links should work:
http://vincke.home.cern.ch/vincke/Pipsicad_int.linux
http://vincke.home.cern.ch/vincke/Flukacad_int.linux
http://vincke.home.cern.ch/vincke/FILEDAT
Kind regards,
Dávid Horváth
Junior Researcher
Radiation Protection
ELI Beamlines
E: david.horvath_at_eli-beams.eu
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břeľany, Czech Republic
________________________________________
From: Andrew Hastings <ahasti4_at_lsu.edu>
Sent: 15 August 2018 17:10
To: Horváth Dávid; Andrea Fontana
Subject: RE: [fluka-discuss]: Flukacad & Pipsicad in Docker
I appreciate all of your help with this so far. What I'm hoping to be my last issue is the link for the Pipsicad/Flukacad/FILEDAT downloads isn't functioning.
I began at Heli's Homepage
http://vincke.home.cern.ch/vincke/
And tried the 3 download links he provides.
http://home.cern.ch/~vincke/Pipsicad_int.linux
http://home.cern.ch/~vincke/Flukacad_int.linux
http://home.cern.ch/~vincke/FILEDAT
None of these pages are found, preventing me from acquiring the files. The typed out link he provides only brings me to a CERN search page that can't find the files either.
Any suggestions on how I can get these packages?
Andrew D. Hastings
Medical Physics and Health Physics Graduate Student (MS) College of Engineering SI Coordinator Louisiana State University (225)333-8435|ahasti4_at_lsu.edu
-----Original Message-----
From: Horváth Dávid <David.Horvath_at_eli-beams.eu>
Sent: Friday, August 10, 2018 1:25 AM
To: fluka-discuss <fluka-discuss_at_fluka.org>; Andrea Fontana <andrea.fontana_at_pv.infn.it>; Andrew Hastings <ahasti4_at_lsu.edu>
Subject: Re: [fluka-discuss]: Flukacad & Pipsicad in Docker
Dear Andrew,
the packages needed to run Flukacad and Pipsicad in Docker are:
glibc.i686 libgcc.i686 compat-libf2c-34.i686
You can find the instructions for how to install them at
https://flukadocker.github.io/F4D/ under "Custom packages".
Kind regards,
Dávid Horváth
Junior Researcher
Radiation Protection
ELI Beamlines
E: david.horvath_at_eli-beams.eu
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břeľany, Czech Republic
________________________________________
From: Andrea Fontana <andrea.fontana_at_pv.infn.it>
Date: Thu, 9 Aug 2018 18:21:13 +0200 (CEST)
Dear Andrew,
we have to try, since this is not tested yet. I have no experience with these tools, but I have just downloaded them and I see they are distributed as ELF binaries.
The main thing is to understand which libraries were linked to make these executables and to see if they are available in our Docker image. This is my first idea: let us see also David's and others opinions.
We will let you know...
Best,
Andrea
> Discussion Group,
>
> I was wondering if you could provide me with guidance to install and
> run the Flukacad and Pipsicad programs by Heli for exporting to
> AutoCAD using the Docker version of Fluka for Windows 10 Professional.
>
> [1465572792562_image003.png]
> Andrew D. Hastings
> Medical Physics and Health Physics Graduate Student (MS) College of
> Engineering SI Coordinator Louisiana State University
> (225)333-8435|ahasti4_at_lsu.edu<mailto:ahasti4_at_lsu.edu>
>
>
--
========================================================================
Dr. Andrea Fontana tel: +39 0382 987991
Istituto Nazionale fax: +39 0382 423241
di Fisica Nucleare
Sezione di Pavia e-mail: andrea.fontana_at_pv.infn.it
Via Bassi 6 web : www.pv.infn.it/~fontana
27100 PAVIA, Italy
========================================================================
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id¬c_info
Received on Wed Aug 22 2018 - 18:59:54 CEST