RE: plotgeom

From: Marco Mauri (Marco.Mauri@cern.ch)
Date: Tue Nov 06 2007 - 10:12:08 CET

  • Next message: Jiasen Ma: "RE: plotgeom"

    Hello Jiasen!
    I think you have a crash because in your input file X0=3DX1=3D0 (x =
    coordinates of the corners of the picture), but at the same time :
    TYX,TYY,TYZ =3D 1, 0, 0
    So, the extension of the plot in y is zero!

    As a suggestion: for plotting (but not only:)) flair could be very =
    useful.

    Marco

    -----Original Message-----
    From: owner-fluka-discuss@mi.infn.it on behalf of Jiasen Ma
    Sent: Mon 11/5/2007 4:18 PM
    To: fluka-discuss@fluka.org
    Subject: plotgeom

    Hello,

    I am trying to get a visual image of the detectors that I
    described in the .inp file. I tested the .inp file and it worked.
    After I insert the PLOTGEOM command imediately after
    GEOEND or after material assignment(I followed a example in
    the manual to use PLOTGEOM), the code won't run. Fluka gives
    out message as:
    =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
    =3D=3D=3D=3D=3D=3D=3D Running FLUKA for cycle # 1
    =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
    =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
    ./rfluka: line 321: 12583 Aborted (core
    dumped) ${EXE} <$INPN 2>$LOGF >$LOGF
    Can anyone help me on using PLOTGEOM?

    Thanks,
    Jiasen

    Here is my input card:
    TITLE
    Particle production from 12-GeV (KE) protons on a Pt target
    *...+....1....+....2....+....3....+....4....+....5....+....6.
    ...+....7....+....8
    GLOBAL 1.0
    DEFAULTS =20
            PRECISION
    SOURCE 1.0 1.0 13.0 =20
            pt13_
    BEAM 15.0 =20
            NEUTRON
    PHYSICS 1000. 1000. 1000. 1000. 1000.=20
      1000. PEATHRESH
    *EMF =20
             OFF
    *LOW-BIAS 1.0
    *LOW-MAT 26.0 74. -2. 293. =20
             TUNGSTEN
    *LAM-BIAS 1.0E+10 13. 16.
           1.GDECAY
    *
    GEOBEGIN =20
            COMBINAT
      0 0 A simple Pt target inside vacuum
    SPH BlakHole 0.0 0.0 0.0 3000.0
    SPH World 0.0 0.0 0.0 1000.0
    RCC CC02 0.0 0.0 195.0 0.0 0.0 10.0 20.0
    RCC CV 0.0 0.0 699.7 0.0 0.0 0.6 90.0
    RCC Vacuum 0.0 0.0 195.0 0.0 0.0 10.0 6.0
    RCC CVspt 0.0 0.0 699.7 0.0 0.0 0.6 6.0
    END
    R1bh 2 +BlakHole -World
    R2World 2 +World -CC02 -CV
    R3CC02 2 +CC02 -Vacuum
    R4CV 2 +CV -CVspt
    R5Vacuum 2 +Vacuum
    R6CVspt 2 +CVspt
    END
    GEOEND

    *...+....1....+....2....+....3....+....4....+....5....+....6.
    ...+....7....+....8
    MATERIAL 0.0 0.0 1.032 26.0 =20
            SCINT
    COMPOUND 11.0 3.0 10.0 6.0 =20
            SCINT
    *
    ASSIGNMAT 1.0 1.0
    ASSIGNMAT 2.0 2.0 5.0
    ASSIGNMAT 17.0 3.0
    ASSIGNMAT 23.0 6.0
    ASSIGNMAT 26.0 4.0
    *...+....1....+....2....+....3....+....4....+....5....+....6.
    ...+....7....+...
    PLOTGEOM 1.0 1.0 0.0 0.0 0.0
         5. FORMAT
              Vertical section of Example Detector
           0.0 -80.0 100.0 0.0 80.0 710.0
           1.0 0.0 0.0 0.0 1.0 0.0
           1.0 1.0 0.0
    STOP
    *...+....1....+....2....+....3....+....4....+....5....+....6.
    ...+....7....+....8
    * e+e- and gamma production threshold set at 10 MeV
    *EMFCUT -0.010 0.010 1.0 12.0 =20
             PROD-CUT
    * Boundary crossing current in the middle of the target (log
    intervals, one-way)
    USRBDX 1.0 201.0 47.0 4.0 2.0
         1. CurrUD
    USRBDX +15.0 +15.0 0.0
             &
    USRBDX 1.0 201.0 47.0 6.0 2.0
         1. CurrUD
    USRBDX +15.0 +15.0 0.0
             &
    * Call MGDRAW
    USERDUMP 101.0 2. =20
            prod
    *...+....1....+....2....+....3....+....4....+....5....+....6.
    ...+....7....+....8
    RANDOMIZE 1.0 128352042.
    *...+....1....+....2....+....3....+....4....+....5....+....6.
    ...+....7....+....8
    START 20.0
    STOP


  • Next message: Jiasen Ma: "RE: plotgeom"

    This archive was generated by hypermail 2.1.6 : Tue Nov 06 2007 - 11:58:23 CET