Hi Raushan
Now that this is published -
https://doi.org/10.1016/j.nima.2018.10.117 - I feel comfortable to publicise this a little better, FluDAG - Fluka + DAGMC is the fruition of a lot of work between myself, the University of Wisconsin-Madison, NASA and a lot of input from Alfredo and Vasilis. FluDAG allows users to use CAD directly in FLUKA simulations.
I hope to post general instructions that people can follow in the coming weeks that will mean anyone, given a few requirements on your CAD (nothing too onerous) - that should enable you to be able to run FluDAG in your CAD geometry.
I hope this helps/will help in the near term.
Thanks
Andy
________________________________
From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> on behalf of Mover, Umer <umer.mover_at_alumni.fh-aachen.de>
Sent: Tuesday, November 6, 2018 6:28:56 PM
To: kabytayeva; Fluka Discuss
Subject: Re: [fluka-discuss]: FLUKA and AutoCAD
I also faced similar problem.
What I did was to use SimpleGeo (Geometry developing tool for Fluka) in which I could import 2d or 3d AutoCAD file.
Unfortunately, I had to create a new geometry on SimpleGeo since my imported AutoCAD geometry was not supported in the FLUKA. However, it was easier for me to build the new geometry on SimpleGeo using the CAD coordinates.
Yours Sincerely,
Umer H. Mover, B.E. Energy
Master Student
European Master of Science in Nuclear Applications
FH Aachen- University of Applied Sciences, Jülich
+49 176 37114415<tel:+49%20176%2037114415>
________________________________
From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> on behalf of kabytayeva <kabytayeva_at_jinr.ru>
Sent: Tuesday, November 6, 2018 3:39:34 PM
To: Fluka Discuss
Subject: [fluka-discuss]: FLUKA and AutoCAD
I have geometry in AutoCAD and I would like to know how it is possible
to open it in FLUKA for simulating? Is it possible by FLUKACAD? I have
found the FLUKACAD :
http://vincke.home.cern.ch/vincke/? but I could not
download it. Could you help me to solve this problem?
Many thanks in advance
--
С уважением,Раушан Кабытаева
Best regards, Raushan Kabytayeva
engineer of the RIB group
Flerov Laboratory of Nuclear Reactions
Joint Institute for Nuclear Research
Joliot-Curie str, 6. Bld 131, office 408.
141980 Dubna, Moscow region - Russia
phone: +7(49621)62517
e-mail:kabytayeva_at_jinr.ru
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
__________________________________________________________________________
You can manage unsubscription from this mailing list at
https://www.fluka.org/fluka.php?id=acc_info
Received on Fri Nov 09 2018 - 01:19:01 CET