Dear Abhijit,
the error message suggests that, you tried to install a FLUKA version not compatible with your compiler. Please check if you tried to install the fluka2011.2x-linux-gfor64bit-7.3-AA.tar.gz package.
Kind regards,
Dávid Horváth
Junior Researcher
Radiation Protection
ELI Beamlines
E: david.horvath_at_eli-beams.eu
T: +420 266 051 283
M: Za Radnicí 835, 25241 Dolní Břeľany, Czech Republic
________________________________________
From: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> on behalf of Dr. Abhijit Bhattacharyya <vega_at_barc.gov.in>
Sent: 03 December 2018 06:07:08
To: fluka-discuss_at_fluka.org
Subject: [fluka-discuss]: New Fluka issue in ubuntu 18.04
Hello!
I installed recently new FLUKA2011.2x followed by flair and flair geomviewer in Ubuntu
OS 18.04 LTS while I find some issues.
First I would like to configuration in my laptop:
(a) linux kernel: 4.19.6-041906-generic (x86_64),
(b) gcc version: 7.3.0-27ubuntu1~18.04
(c) gfortran version: 7.3.0-27ubuntu1~18.04
(d) GNU ld version: 2.30
I defined FLUFOR and FLUPRO as described.
I faced that my input was not running and then I tried to run exfixed.inp as provided in
fluka distribution as suggested by one of my friend.
I see "timed out" in run status in flair. So I tried to run using "rfluka -M 1
exfixed.inp" directly from command prompt. I see that "fluka_6423" subdirectory is
formed which contains manyfiles. Here fort.11 points to exfixed001.out file which was
not created.
The peculiar part is that "fluka_6423/exfixed001.log" contains following:
vega_at_aditya:~/test$ cat fluka_6423/exfixed001.log
Fortran runtime error: Incorrect extent in VALUE argument to DATE_AND_TIME intrinsic: is
-140202614629398, should be >=8
Error termination. Backtrace:
#0 0x7f8376ac12da in ???
#1 0x7f8376ac1ec5 in ???
#2 0x7f8376ac21b7 in ???
#3 0x7f8376c50fc2 in ???
#4 0x564af9cca0db in datimf_
at /home/alfredo/fluprogfor/linuxmvax/datimf.f:55
#5 0x564af9c16464 in flukam_
at /home/alfredo/fluprogfor/mainmvax/flukam.f:1163
#6 0x564af9c162fb in fluka
at /home/alfredo/fluprogfor/mainmvax/fluka.f:307
#7 0x564af9c162fb in main
at /home/alfredo/fluprogfor/mainmvax/fluka.f:310
vega_at_aditya:~/test$
The "date-time" error and pointer to "/home/alfredo/..." are something not expected. Is
there anything wrong in my installation?
Please advise.
Thanks and Regards
Abhijit Bhattacharyya
--
Dr. Abhijit Bhattacharyya
OFFICE:
NUCLEAR PHYSICS DIVISION
Bhabha Atomic Research Center (BARC)
MUMBAI - 400 085. INDIA
PHONE: +92-22-2559-2066
FAX:- +91-22-2550-5151
Residence:
A/13 Deepak
Anushakti Nagar
MUMBAI - 400 094. INDIA
PHONE: +91-22-25580930
Mobile: +91-98201-49770
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Mon Dec 03 2018 - 10:34:11 CET