-- Adam Dabkowski MSc Cyclotron Engineer Wales Positron Emission Tomography Imaging Centre (PETIC) Cardiff University School of Medicine College of Biomedical and Life Science Heath Park Cardiff CF14 4XN Tel: +44 02920 745787 / 07511 196842 Email: dabkowskia_at_cardiff.ac.uk Peiriannydd Cyclotron Canolfan Delweddu Tomograffeg Gollwng Positronau Cymru Ysgol Meddygaeth Prifysgol Caerdydd Coleg y Gwyddorau Biofeddygol a Bywyd Parc y Mynydd Bychan Caerdydd CF14 4XN Tel: +44 02920 745787 / 07511 196842 E-bost: dabkowskia_at_caerdydd.ac.uk -----Original Message----- From: Horváth Dávid <David.Horvath_at_eli-beams.eu> Sent: 05 February 2019 12:45 To: Adam Dabkowski <DabkowskiA_at_cardiff.ac.uk>; fluka-discuss_at_fluka.org Subject: Re: Problems with running FLUKA on Virtual Box and Flupix Dear Adam, there are some changes you need to make to be able to run your input again. 1.) The last released version Flupix has an outdated version of FLUKA installed, and it won't run. You need to update to the latest version, but as far as I know, it is not possible in Flupix. Since Flupix is discontinued, you have two main options to run FLUKA on Windows. a.) If you want to keep using Virtualbox, you will need to install your Linux distribution (preferably Fedora) and FLUKA. b.) You start using the container based FLUKA distribution. For details go to: https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fflukadocker.github.io%2FF4D%2F&data=01%7C01%7CDabkowskiA%40cardiff.ac.uk%7C005738e94dfd4e5d451b08d68b67d086%7Cbdb74b3095684856bdbf06759778fcbc%7C1&sdata=D4512f3qTANfs8Pk0bGoJfXB2UlDGMnkWlrlFdnspxk%3D&reserved=0 2.) After you got your FLUKA installation working, You will need to add a GLOBAL card with SDUM=OLDFLAIR to you input, to be able to use the old flair expressions (like: =18*MeV). 3.) To get the correct results for activation simulations, you will need two PHYSICS cards as well. See the 23rd slide here: https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Findico.cern.ch%2Fevent%2F489973%2Fcontributions%2F2000420%2Fattachments%2F1272671%2F1886660%2F14_AdvancedActivation2016.pdf&data=01%7C01%7CDabkowskiA%40cardiff.ac.uk%7C005738e94dfd4e5d451b08d68b67d086%7Cbdb74b3095684856bdbf06759778fcbc%7C1&sdata=qgOzl%2FspCEJ%2Bld3zHFPNSungk%2F22cGHhmmKC0XpSOlA%3D&reserved=0 These settings was always required to get the correct results, but now FLUKA checks if they are in the input file or not. I hope this helps. Kind regards, Dávid Horváth Junior Researcher Radiation Protection ELI Beamlines E: david.horvath_at_eli-beams.eu<mailto:david.horvath_at_eli-beams.eu> T: +420 266 051 283 M: Za Radnicí 835, 25241 Dolní Břeľany, Czech Republic ________________________________________ From: owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it> <owner-fluka-discuss_at_mi.infn.it<mailto:owner-fluka-discuss_at_mi.infn.it>> on behalf of Adam Dabkowski <DabkowskiA_at_cardiff.ac.uk<mailto:DabkowskiA_at_cardiff.ac.uk>> Sent: 05 February 2019 12:10:57 To: fluka-discuss_at_fluka.org<mailto:fluka-discuss_at_fluka.org> Subject: [fluka-discuss]: Problems with running FLUKA on Virtual Box and Flupix Dear Fluka Experts, I was running for year my simple experiments simulations with irradiation of stacked foils in cyclotron targets. However, since more than a year I receive strange errors and time out messages. I use Virtual Box and Flupix. Could you please verify my inp file but I think there are no errors as it was running well before. Kind Regards -- Adam Dabkowski MSc Cyclotron Engineer Wales Positron Emission Tomography Imaging Centre (PETIC) Cardiff University School of Medicine College of Biomedical and Life Science Heath Park Cardiff CF14 4XN Tel: +44 02920 745787 / 07511 196842 Email: dabkowskia_at_cardiff.ac.uk<mailto:dabkowskia_at_cardiff.ac.uk<mailto:dabkowskia_at_cardiff.ac.uk%3cmailto:dabkowskia_at_cardiff.ac.uk>> Peiriannydd Cyclotron Canolfan Delweddu Tomograffeg Gollwng Positronau Cymru Ysgol Meddygaeth Prifysgol Caerdydd Coleg y Gwyddorau Biofeddygol a Bywyd Parc y Mynydd Bychan Caerdydd CF14 4XN Tel: +44 02920 745787 / 07511 196842 E-bost: dabkowskia_at_caerdydd.ac.uk<mailto:dabkowskia_at_caerdydd.ac.uk<mailto:dabkowskia_at_caerdydd.ac.uk%3cmailto:dabkowskia_at_caerdydd.ac.uk>>
(image/jpeg attachment: image002.jpg)
This archive was generated by hypermail 2.3.0 : Mon Apr 15 2019 - 18:31:35 CEST