[fluka-discuss]: RE: Subscript out of range, procedure dfatwg.f

From: Stefan Roesler <Stefan.Roesler_at_cern.ch>
Date: Thu, 12 Sep 2019 18:22:46 +0000

Hi Stefano

I suspect something wrong with the material definition or assignment but hard to tell without the voxel file.. you would have to post it so that one can try


From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of Stefano Dalla Vecchia [sdv_at_kth.se]
Sent: 12 September 2019 10:30
To: fluka-discuss_at_fluka.org
Subject: [fluka-discuss]: Subscript out of range, procedure dfatwg.f

Dear FLUKA experts,

So I've been trying the simulation attached to this e-mail. It's a human phantom made out of voxels placed inside a lunar base.

I checked the geometry and everything should be working smoothly, however whenever I launch the simulation I get this message in the .log file:

Subscript out of range on file line 47, procedure dfatwg.f/dfatwg.
Attempt to access the 0-th element of variable isondx[subscript-2-of-2].te for Nuclear Physics

I'm somewhat new to Fluka and Flair, and honestly cannot understand where the problem could be originating from. If you could help me it would be very appreciated

Stefano Dalla Vecchia

European Astronaut Center

You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info
Received on Thu Sep 12 2019 - 21:37:54 CEST

This archive was generated by hypermail 2.3.0 : Thu Sep 12 2019 - 21:38:04 CEST