Re: [fluka-discuss]: Source.f user routine for neutrons

From: Beatrice Pomaro <beatrice.pomaro_at_dicea.unipd.it>
Date: Fri, 09 Aug 2024 08:44:42 +0200

Thank you very much, it works now.
Kind regards,
Beatrice

---
**************************************************
Ing. Beatrice Pomaro
Universita' degli Studi di Padova
Dipartimento di Ingegneria Civile, Edile e Ambientale
Via F. Marzolo, 9 - 35131 Padova (Italy)
tel.: +39 049 8275601
e-mail: beatrice.pomaro_at_dicea.unipd.it
Il 05-08-2024 08:00 Konstantin Batkov ha scritto:
> Dear Beatrice,
> 
> It should be
> 
>> LOW-MAT     HYDROGEN        1.       -2.      296.                    
>> HYDROGEN
> Note that if you use the HYDROGEN isotope for materials other than 
> PORTLAND, you should define a separate hydrogen specifically for 
> PORTLAND and use its name in WHAT(1), as shown in the LOW-MAT card 
> example.
> 
> Konstantin
> 
> Il giorno ven 2 ago 2024 alle ore 18:57 Beatrice Pomaro 
> <beatrice.pomaro_at_dicea.unipd.it> ha scritto:
> 
> Dear Konstantin,
> thank you very much for your help. I have added card LOW-MAT (attched 
> file) but I get the following error message: "undefined atomic density 
> for the low en. xsec mat. corresponding to the comp. mat. n. 27". Do 
> you have a suggestion also for that?
> Thank you very much,
> Kind regards,
> Beatrice
> 
> ---
> **************************************************
> Ing. Beatrice Pomaro
> 
> Universita' degli Studi di Padova
> Dipartimento di Ingegneria Civile, Edile e Ambientale
> Via F. Marzolo, 9 - 35131 Padova (Italy)
> tel.: +39 049 8275601
> e-mail: beatrice.pomaro_at_dicea.unipd.it
> 
> Il 02-08-2024 11:06 Konstantin Batkov ha scritto:
> 
> Also, if you are interested in accurate neutron transport below a few 
> eV, you need to define a thermal scattering kernel for your wall 
> material. Otherwise, FLUKA assumes the free gas approximation. To do 
> this, specify the wall temperature (room temperature?) and the 
> crystal/molecular bound states (hydrogen in a water molecule in your 
> case). If you use groupwise neutron transport, do this with the LOW-MAT 
> card with the 1 1 296 identifiers (see table 10.3). In the case of 
> pointwise transport, define the appropriate TSL-PWXS card (the LOW-MAT 
> card is not needed in this case) and, of course, use pointwise energy 
> binning in your estimators:
> TSL-PWXS 1.0  1.0  296.0  PORTLAND
> 
> Konstantin
__________________________________________________________________________
You can manage unsubscription from this mailing list at https://www.fluka.org/fluka.php?id=acc_info

Received on Fri Aug 09 2024 - 10:20:50 CEST