RE: No _usrbin_0 files after simulation

Hi Lawrence,

difficult to judge what exactly is going wrong (input problem, problem
when handling flair, too less statistics,...), perhaps this helps:

when using flair:
- in <Run>: run the input-file for at least three histories (001, 002,
003)
- in <Data>: check the files generated and verify one of the *00?*out
files if the run was ok, i.e., check also the region summary table in
the end and see if you see fluence/energy deposition/stars in the
regions you're intested in (and you scored with usrbin)
- in <Files>: press 'Process' to generate the averaged files, etc...
- in all cases check also the flair-output window for suspicious
messages

direct cross-check:
- check one of your usrbin files directly, i.e., either generate for a
test an ASCII output (positive file-id in the respective USRBIN card),
or convert the generated binary file into an ASCII by using the user
routine (in $FLUPRO/flutil) <usbfuf> or <usbrea>

this should help you to understand what's going on.

cheers

Markus

.................................
From: Lawrence Mhatiwa [mailto:lawrencemhatiwa_at_hotmail.com]=20
Sent: Samstag, 31. J=E4nner 2009 11:41
To: Markus Brugger; fluka-discuss_at_fluka.org
Subject: RE: No _usrbin_0 files after simulation

Dear Markus
=20
Thank you so much for your help.Well i downloaded a new fluka version =
last week and i can now run my input file.But i'm now facing another =
problem.i want to merge the results for all the cycles but my _usrbin_0 =
is empty. I expected after clicking it i would get files with results =
to merge but there is nothing to merge.i could have attached my input =
file but its too big to by attached into my mail.Iam using falir Version =
0.7.5(R1.69) last chenged 2009/01/05.
=20
please help.
=20
Have a nice weekend Markus
=20
Lawrence

> Subject: RE: How do i run this input file?
> Date: Sun, 25 Jan 2009 20:52:44 +0100
> From: Markus.Brugger_at_cern.ch
> To: lawrencemhatiwa_at_hotmail.com; fluka-discuss_at_fluka.org
>=20
> Hi Lawrence,
>=20
> I can't check your input-file as somehow your attachment got scrambled
> (see below), thus please attach it to your email using a different way
> and also add the output file. For the executable, in case you don't =
use
> any specific user routine (doesn't seem to be the case), there is no
> need to recompile a fluka executable. Evidently, you have to have a
> correctly installed FLUKA version, i.e., also having created the main
> executable (make -> flukahp) as described in the manual and =
installation
> instructions. This you can easily check by trying to run the basic
> example without any changes.=20
>=20
> cheers
>=20
> Markus
>=20
>=20
> > -----Original Message-----
> > From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka-
> > discuss_at_mi.infn.it] On Behalf Of Lawrence Mhatiwa
> > Sent: 19 January 2009 19:06
> > To: fluka-discuss_at_fluka.org
> > Subject: How do i run this input file?
> >=20
> > --_4897fffd-6715-4f13-9850-18b8cf294a4b_
> > Content-Type: multipart/alternative;
> > boundary=3D"_9bed5805-4943-4d2c-886a-ac3bd37dd507_"
> >=20
> > --_9bed5805-4943-4d2c-886a-ac3bd37dd507_
> > Content-Type: text/plain; charset=3D"Windows-1252"
> > Content-Transfer-Encoding: quoted-printable
> >=20
> >=20
> > Hi
> > I am an Msc Medical Physics Student at University of Free state in
> > South Af
> > rica.My research involves using Fluka Mc code to calculate neutron
> > dose in
> > controlled areas of a Radiotherapy Department.
> >=20
> > I am looking for help from you all fluka users. I have been =
following
> > the
> > example in Flair manual but after building the input file(tutorial)
> > attached
> > to this mail=3D2C the simulation did not run at all. I picked one of
> > the
> > outputs (tutor003.out) but could not get a meaningful result. Well I
> > thought after debugging the geometry i have to compile an executable
> > file
> > but there are no instructions on how to compile an executable file =
in
> > Flair manual or maybe i can not see the instruction but I have
> > checked
> > several time i did not see them.Please fluka users could you please
> > help
> > me with instructions onhow to compile an executable file maybe i =
will
> > be
> > able to run my simulations.
> >=20
> > Please help
> >=20
> > Lawrence
> >
Received on Tue Feb 03 2009 - 21:15:00 CET