Re: rootfluka example

From: Marco Calviani <Marco.Calviani_at_cern.ch>
Date: Mon, 22 Feb 2010 23:33:50 +0100

Dear Vassili,

In order to properly run the example it is necessary to have a careful look=
 at the settings of environmental variables.
Did you try to include your current directory in the LD_LIBRARY_PATH? Assum=
ing your executable is located in /home/testuser/fluka/example:

$ export LD_LIBRARY_PATH=3D/home/testuser/fluka/example:$LD_LIBRARY_PATH

In this case I'm able to run the above mentioned example.

Cheers,
Marco

On Feb 22, 2010, at 7:33 PM, Vassili Maroussov wrote:

> Dear FLUKA users and maintainers,
>=20
> I cannot make working the rootfluka example=20
> (http://www.fluka.org/fluka.php?id=3Dexamples&sub=3Dexample3&node=3D4) us=
ing=20
> files given in http://www.fluka.org/content/examples/example.tar.gz The=20
> "make" produces the rootfluka executable, but it hangs up (becomes=20
> zombie) while trying to run with Flair, then timed out. Below is the=20
> session (with some comments) with use of "rfluka":
>=20
> *** Checking if a proper environment variables are set ***
>=20
> [testuser_at_Ezhik-HDX18-i386 example]$ env | grep ROOT
> LD_LIBRARY_PATH=3D/usr/local/ROOT/26.00-g34/lib:.
> PATH=3D/usr/local/ROOT/26.00-g34/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/sb=
in:/usr/kerberos/bin:/usr/lib/ccache:/usr/local/bin:/usr/bin:/bin:/usr/loca=
l/sbin:/usr/sbin:/sbin:/home/testuser/bin
> ROOTSYS=3D/usr/local/ROOT/26.00-g34
> [testuser_at_Ezhik-HDX18-i386 example]$ env | grep FLU
> FLUTIL=3D/home/testuser/fluka/2008.3c/flutil
> FLUPRO=3D/home/testuser/fluka/2008.3c
>=20
> *** Running rfluka ***
>=20
> [testuser_at_Ezhik-HDX18-i386 example]$ $FLUTIL/rfluka -e rootfluka -N0 -M1=
=20
> root.inp
> $TARGET_MACHINE =3D Linux
> $FLUPRO =3D /home/testuser/fluka/2008.3c
> /home/testuser/fluka/2008.3c/libec_thihecufealw_10t.pemf
>=20
> Initial seed already existing
> Running fluka in /home/testuser/fluka/example/fluka_28581
>=20
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Run=
ning FLUKA for cycle # 1 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D
> [testuser_at_Ezhik-HDX18-i386 example]$
>=20
> *** End of the session ***
>=20
> So neither way produces the output expected. I'm using FLUKA 2008.3c.0=20
> and ROOT 5.26.00 on Fedora 12 i686 (32-bit) installed on Sun VirtualBox=20
> 3.1.4 r57640 The standard FLUKA executable runs with no problems on this=
=20
> machine.
>=20
> What's wrong? How can I make the rootfluka example running?
>=20
> Regards,
>=20
> Vassili
>=20
>=20

**************************
Marco Calviani
CERN-EN/STI
CH-1211 Geneva 23
Switzerland
tel. +41 22 7675582
gsm. +41 76 4872687
fax +41 22 7668213
**************************
Received on Tue Feb 23 2010 - 00:29:48 CET

This archive was generated by hypermail 2.2.0 : Tue Feb 23 2010 - 00:29:48 CET