Problem trying to change the pressure of Argon

From: Howard Matis <hsmatis_at_lbl.gov>
Date: Thu, 18 Nov 2010 16:58:37 -0800

We have found that we need to change the density of Argon to look at
high pressure Argon.

The following card seems to work. Note the density of argon is 7 times
higher than nominal 0.001662 .

MATERIAL 18. 39.948 0.014016
MAT-PROP 7.0 ARGON_2

pressure set to 7 and density at 0.014016 (7 *nominal)
                10.21
pressure set to 1 and density at 0.014016 (7 *nominal)
                  9.22
pressure at 7.0 and the density at 0.001662
                          2.16
pressure at 1.0 and the density at 0.001662
                          1.88

So why does the MAT-PROP card not change the ionization that is
deposited or am I doing something wrong?

Howard
Received on Fri Nov 19 2010 - 10:38:58 CET

This archive was generated by hypermail 2.2.0 : Fri Nov 19 2010 - 10:39:06 CET