RE: How to set transport and production energy cut-off for particles apart from e+/e- and photon?

Dear Danny,

Transport cutoffs, or thresholds, are set with command PART-THRes for hadrons
and muons, with EMFCUT for electrons, positrons and photons, and with LOW-BIAS
for low-energy neutrons. Please refer to the descriptions of those cards in the manual
for the right way to use them in a way suitable for your application. Note that
while in many applications charged particles can be safely discarded at some
energy threshold to save CPU time with no significant impact on the
scored quantities, it is often more "dangerous" for neutrons.
But this is specific to you application....
Hoping this help
Best regards
Joachim Vollaire

-----Original Message-----
From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka-discuss_at_mi.infn.it] On Behalf Of dengmw_at_student.sysu.edu.cn
Sent: 25 June 2011 07:35
To: fluka-discuss_at_fluka.org
Subject: How to set transport and production energy cut-off for particles apart from e+/e- and photon?

Dear all,

As known to all,we can use EMFCUT card to define the transport
and production energy cut-off for e+/e- and photon.But how to set
these properties to other particles,for example,neutron?
Any ideas would be helpful.

Yours,
Danny
Received on Wed Jun 29 2011 - 18:11:03 CEST