RE: Probably geometry problem

Hi Julian,

Your geometry looks okay. But you start a particle beam at Z=3D20.0
which coincides with the base of one of your cylinders. This is
something that should be avoided as it is not mathematically not clear
whether this position is already within the cylinder or not. I'd suggest
to either move it a bit up or down in Z, depending where you want to
start your beam.

Cheers
Chris

-----Original Message-----
From: owner-fluka-discuss_at_mi.infn.it [mailto:owner-fluka discuss_at_mi.infn.it=
] On Behalf Of Julian Rassolov
Sent: 17 July 2011 12:36
To: fluka-discuss_at_fluka.org
Cc: Shlomo Mark
Subject: Probably geometry problem

Good afternoon, all .

I was trying to sun a simple simulation , but as a result receives strange =
error.
line 358: 1812 Aborted "${EXE}" < "$INPN" 2> "$LOGF" > "$LOGF"

When I tried to find some relevant post about such kind of error , the only=
  thing I was able to dig is:
http://www.fluka.org/web_archive/earchive/prova/1272.html
with the following reply :
http://www.fluka.org/web_archive/earchive/prova/1277.html

As far as I understand I have some problem with geometry, but I can't be su=
re since I am relatively new to FLUKA.
I rechecked the basic geometry that I have , but still fail to find an erro=
r. I am posting my input file below , so if you could give me some advise\s=
uggestion, I will really apprisiate this.

Thank you in advance ,
                         Julian.

Input file (created with flair):

*
* Created: 27.3.2011
* At: 19:6:33
TITLE
MC-CAD Test
BEAM -.05 ELECTRON
BEAMPOS 0.0 20.0 20.0 1.0 0.0
GEOBEGIN COMBNAME
      0 0 MC-CAD
* 1
RPP B1 -50.0 50.0 -20. 80.0 -20.0 80.
* 2
RCC B2 0.0 20.00 20.00 0.04 0.00 0.0 0.06
* 3
RCC B3 0.041 20.00 20.0 0.10 0.00 0.0 0.06
* 4
RCC B4 0.142 20.00 20.0 0.10 0.00 0.00 0.06
* 5
RCC B5 0.0 20.00 20.00 0.25 0.00 -0.00 0.16
* 6
RCC B6 -2.00 20.00 20.00 6.0 0.00 0.00 0.30
END
* 1; assigned material: Blackhole; mat # (1)
R1 5 +B1-B6
* 2; assigned material: Tantalum; mat # (18)
R2 5 +B2
* 3; assigned material: M100; mat # (34)
R3 5 +B3
* 4; assigned material: M100; mat # (34)
R4 5 +B4
* 5; assigned material: water; mat # (3)
R5 5 +B5-B2-B3 -B4
* 6; assigned material: air; mat # (8)
R6 5 +B6-B5
END
GEOEND
* 104 Air dry (near sea level)
*
MATERIAL .00120484 AIR
COMPOUND -1.248E-4 CARBON -.755267 NITROGEN -.231781 OXYGENAIR
COMPOUND -0.012827 ARGON AIR
* 276 Water liquid H2_O
* Chemical Formula: H -- O -- H
MATERIAL 1.0 WATER
COMPOUND 2.0 HYDROGEN 1.0 OXYGEN WATER
MATERIAL 42. 100. 10.22 MOLYBDEN 100.Mo100
MATERIAL 42. 95.94 10.22 MOLYBDEN
MAT-PROP 424.0 MOLYBDEN
MAT-PROP 60.0 MOLYBDEN DPA-ENER
STERNHEI 4.8793 .2267 3.2784 0.10525 3.2549 .14MOLYBDEN
MAT-PROP 75.0 WATER
STERNHEI 3.5017 .24 2.8004 .09116 3.4773 WATER
ASSIGNMA BLCKHOLE R1
ASSIGNMA TANTALUM R2
ASSIGNMA Mo100 R3
ASSIGNMA Mo100 R4
ASSIGNMA WATER R5
ASSIGNMA AIR R6
RANDOMIZ 1.
START 1. 0.0
STOP
Received on Mon Jul 18 2011 - 09:59:55 CEST