From: Santana, Mario <msantana_at_SLAC.Stanford.EDU>

Date: Sat, 12 May 2012 11:12:06 -0700

Date: Sat, 12 May 2012 11:12:06 -0700

Hi Roser,

Hx, Hy and Hz are the three components of the vector that defines the axis of your cylinder that has the origin in the base that you

define through the previous three WHATS. For instance, in your case you have a cylinder the axis of which is in Z and starts at

Z=3D0.25 and ends at Z=0.5=0.25+0.25 cm.

The message that you get is probably not due to a geometry error. You must set the viewing 'window' so that you will see more than

one region in your geometry, otherwise you get that.

Put the center of your plot for instance at 0,0,0.25 and define extents of 1 and 1. Then try to plot.

Mario

On May 12, 2012, at 8:10 AM, Roser Farre i Ponsa wrote:

Dear FLUKA experts and users,

I started using FLAIR and I had some problems with geometry.

When I try to plot geometry a message appears saying that no geometry exist=

s.

I realized that the problem come from RCC (my geometry consists on an alumi=

num cylinder). Exactly from Hx, Hy and Hz I don't understand the perfect me=

aning of this WHATS.

Could you please help me with my problem?

Thanks!

<Captura de pantalla 2012-05-09 a la(s) 20.31.07.png>

Received on Sun May 13 2012 - 12:43:27 CEST

*
This archive was generated by hypermail 2.2.0
: Sun May 13 2012 - 12:43:38 CEST
*