RE: [fluka-discuss]: double beam

From: Angelo Infantino <angeloinfa_at_hotmail.com>
Date: Fri, 22 Nov 2013 19:08:55 +0100

Dear Renata,The easiest thing is to have multiple runs with the different beam parameters. I work on very similar problem and I have already used this method several times.In the mený RUN add the different runs related to the different beams (i.e. beam1, beam2, etc).After you have run them you can process all the files beam1001_fort.xx, beam1002_fort.xx, .... , beam2001_fort.xx, beam2002_fort.xx, .... , beam3001_fort.xx, beam3002_fort.xx, .... , togheter to obtain your final beamtot_xx.rnc file.

Ciao

Angelo

> Date: Fri, 22 Nov 2013 11:21:07 +0100
> Subject: [fluka-discuss]: double beam
> From: rleanza_at_lns.infn.it
> To: fluka-discuss_at_fluka.org
>
> Dear Fluka expert,
>
> How can I simulate two or three beams directed simultaneously to the same
> target?
> Can I use a source routine?
> (I would like to find the residual nuclei with FLuka in the
> Superconduction Cyclotron at LNS-INFN)
>
>
> --
> Renata Leanza
>
> Istituto Nazionale di Fisica Nucleare
> Laboratori Nazionali del Sud
> Via Santa Sofia,62 - 95123 Catania
> Servizio di Radioprotezione
> Tel +39.095.542.273
>
>
>
>
                                               
Received on Fri Nov 22 2013 - 19:56:37 CET

This archive was generated by hypermail 2.3.0 : Fri Nov 22 2013 - 19:56:38 CET