No you should still include and link the default magfld routine which is configured for a uniform magnetic field, as explained in the lecture and the tutorial.
Best
V.
Sent from my iPad
> On 13/feb/2014, at 22:42, "REDDELL, BRANDON D. (JSC-EV511)" <brandon.d.reddell_at_nasa.gov> wrote:
>
> Thanks Vittorio.
>
> So in my simple problem, I am not using the magfld.f routine, just only the MGNFIELD card. So, could you confirm if these cards should work:
>
> MGNFIELD 20.0 0.2 0.10 0.0 0.0 1.0
> STEPSIZE 0.5 0.0 VAC2 0.0 0.0 0.0
> EMF EMF-OFF
> .
> .
> .
> ASSIGNMA VACUUM VAC2 1.0 (the 1 here is at WHAT(5)
>
> Thanks.
>
> Brandon
>
>
>
> From: Vittorio Boccone [dr.vittorio.boccone_at_ieee.org]
> Sent: Thursday, February 13, 2014 2:47 PM
> To: REDDELL, BRANDON D. (JSC-EV511); fluka-discuss_at_fluka.org
> Subject: Re: [fluka-discuss]: magnetic field in vacuum
>
> Sure, check out the magnetic field exercise (solution) on the advanced course:
> http://www.fluka.org/fluka.php?id=course&sub=program&navig=2&which=triumf2012
> Best
> V.
>
>> On 2/13/2014 8:47 PM, REDDELL, BRANDON D. (JSC-EV511) wrote:
>> FLUKA Users/Experts,
>>
>> Do the magnetic field settings in a region (using MGNFIELD card along with WHAT card 5 in ASSIGNMA Card) work if the region of the B field is a vacuum?
>>
>> Brandon
>
Received on Fri Feb 14 2014 - 00:40:32 CET