Dear David and Vasilis
Many thanks for your e-mail. I'm a beginner using FLUKA and it's the first time I'm running it - so probably I did something wrong during the installation process, I never ran it before so I don't know if it's working properly.
David - what do you mean by recompile the custom executable?
Vasilis - $FLUPRO = /usr/local/fluka/flukapro was from Bruno, he wrote the original e-mail. When I use the geometry-viewer on the top says Errors found (please see the attached file, it's a print screen from my screen). Where can I see the errors? I'm running a popular tutorial that is not up-to-date with the FLAIR version that I'm using. Following the tutorial we should debug the geometry using FLUKA (without the geometry editor), is that still possible with the most up-to-date version of FLAIR.
Many thanks,
Ana
________________________________________
De: horvathd84_at_gmail.com <horvathd84_at_gmail.com> em nome de Dávid HORVÁTH <davhorv112_at_gmail.com>
Enviado: quinta-feira, 27 de Março de 2014 08:16
Para: Ferreira De Almeida Lourenco, Ana
Cc: Vasilis Vlachoudis; Bruno Alves Brenga Vieira; fluka-discuss_at_fluka.org
Assunto: Re: [fluka-discuss]: flair
If I'm not mistaken I had this problem when I updated FLUKA but forgot
to recompile my custom executable.
I hope this will help.
Cheers,
David
On Wed, Mar 26, 2014 at 7:10 PM, Ferreira De Almeida Lourenco, Ana
<am.lourenco_at_ucl.ac.uk> wrote:
> Hello Vasilis
>
> Many thanks for your e-mail.
> I think my FLUPRO variable is well defined. Please see below.
>
> Many thanks,
> Ana
> ---------------------------------------------------------------------------------------------
> Started: 2014.03.26 17:04
> set terminal wxt 0 enhanced raise title 'tutorial.flair-0: nTOF Target Geometry'
>
>
> set key default
>
> Cmd: /home/ana/fluka2011.2b-linux-gfor64bitAA/flutil/rfluka -M 1 flairlOWUtp
> $TARGET_MACHINE = Linux
> $FLUPRO = /home/ana/fluka2011.2b-linux-gfor64bitAA
>
> Initial seed copied from /home/ana/fluka2011.2b-linux-gfor64bitAA
> Running fluka in /home/ana/fluka_work/tutorial/fluka_10930
>
> ======================= Running FLUKA for cycle # 1 =======================
> ... Fluka run: 0.184171 s
> ('No flairlOWUtp001_PLOTGEOM.STORE file', 'flairlOWUtp', 10930)
> ---------------------------------------------------------------------------------------------
>
>
>
>
> ________________________________________
> De: owner-fluka-discuss_at_mi.infn.it <owner-fluka-discuss_at_mi.infn.it> em nome de Vasilis Vlachoudis <Vasilis.Vlachoudis_at_cern.ch>
> Enviado: quarta-feira, 26 de Março de 2014 16:27
> Para: Bruno Alves Brenga Vieira
> Cc: fluka-discuss_at_fluka.org
> Assunto: RE: [fluka-discuss]: flair
>
> It seems your FLUPRO variable is wrongly set it points the flukapro directory and not the fluka directory
> you should set it to /usr/local/fluka
>
> Cheers
> Vasilis
>
> ________________________________________
> From: owner-fluka-discuss_at_mi.infn.it [owner-fluka-discuss_at_mi.infn.it] on behalf of Bruno Alves Brenga Vieira [bruno.brenga_at_aluno.ibb.unesp.br]
> Sent: 26 March 2014 16:30
> To: owner-fluka-users_at_mi.infn.it
> Cc: fluka-discuss_at_fluka.org
> Subject: [fluka-discuss]: flair
>
> hi guys, Im tryng to plut a geometry in the flair.. but always shows this:
>
> Started: 2014.03.26 12:29
> set terminal wxt 0 enhanced raise title 'n_TOF lead target.flair-0: nTOF Target Geometry'
>
>
> set grid
> set key default
>
> Cmd: /usr/local/fluka/flutil/rfluka -e n_TOF lead target.flair -M 1 flairhtxAGx
> $TARGET_MACHINE = Linux
> $FLUPRO = /usr/local/fluka/flukapro
>
> Initial seed copied from /usr/local/fluka/flukaprocp: cannot stat '/usr/local/fluka/flukapro/random.dat': No such file or directory
>
> Running fluka in /usr/local/fluka/flair/flair-2.0/fluka_5769
> ERROR: Random seed '/usr/local/fluka/flair/flair-2.0/ranflairhtxAGx001' do not exist!
> ... Fluka run: 0.0383239 s
> ('No flairhtxAGx001_PLOTGEOM.STORE file', 'flairhtxAGx', 5769)
>
> I dont know whats happen..
>
>
>
>
Received on Thu Mar 27 2014 - 16:41:57 CET